Відео

I built this jig and used it successfully for a big crown job that included some outside miters whose precise angles varied a bit from 45. So that I could see exactly where the angle cursor was pointing on the degree markings on the saw's detent plate, I found it useful to drill holes (~1 1/4") at the ends of the 45 deg. kerf cuts in the jig board as sighting windows.

I'm shattered, I took the grinder apart without making a mark. And now my grinder is working but is very course

I'm doing research before I disassemble my machine for a cleaning. Is this a PEP grinder? Thanks!

Ultimate minimalist continuous crown stop. Totally elegant and effective! I'll be copying this setup in the morning. Thank you!

Great video.Where did you get the replacement head and the kit with the washers?

thanks, did you know if its posible to use another trimmer head on this model? i want to use a head with brush cutter disc

I cannot reach my high ones, they look awful when they pod. I was able to pull the little ones as long as I cut away the branch under them.

This was exactly the video I needed! Thank you!

Any clue where to get the head assembly at?

You made my day,...👏

Left Side panel and front panel is not removed in this video. I can’t get left side panel out. Appreciate the video anyways

this single segment line design is ridiculous...its so wasteful because u toss out so much line....spooled design is best....should fire the designer.

I bought my ENA 8 brand new and took the grinder apart to clean it. Interestingly it didn’t come with the 3 springs and bearings. 😅

Thank you

So easy to do! Thank you!

I know this was several years ago, but do you remember if you had to get an alignment after replacing the struts?

Nice job! How did you depress the strut? And where did you find that info. Looking for it myself

Отличное виде, смонтировано профессионально, все довольно ясно и точно показано без лишних слов. Есть мелкие детали, которые показаны на этом информационном видеоролике по сравнению с другими знатоками разборок кофемашин этого типа ни в одном нету того, что указано здесь. За это Вам огромное Спасибо и сотни миллионов подписчиков на Ваш канал. 🏆🏅💎🥇👏

Thank you! Worked great on mine

the ball bearing thing was excellent....saved my machine :)

I need to know how to replace the front cover... can anyone advise on this pls :)

Thanks, my head fell off and I had no idea how the head attached to the shaft. Now to the hardware store to find the lock washer.

This is completely useless without showing us how to remove the grinder from the machine.

Do you know where I can buy one of these replacement heads? I can't find them in any home improvement stores or online parts retailers.

Good video visually for the model year you are working on. The 2014-2015 Kia Sorento LX FWD has the exact same design for the rear shock mounts. This is the only video I've seen that shows the four point bracket that shields the upper shock mount. You don't have to remove the entire wheel well sound proofing panel though. It has a vertical slip in the fabric that provides access to the top 17 mm bolt. There are two plastic philips screw clips that you can remove on either side of the vertical slit that when removed you can pull the fabric apart slightly to remove that bolt. Also the anchor bolt that attaches the top of the shock is a 24 mm deep socket. I use a battery pack impact wrench to do any fastening and unfastening of bolts and nuts or if need be s breaker bar. Those tools really speed up the process. And as a really important precaution always use jack stands when working in proximity of the underside of a vehicle and never count on a trolley jack because if it rolls there's no stopping it from shifting the vehicle which always has very bad outcomes.

Thank you 👍

Literally the only video on youtube with this style head what a pain guess im returning the fits all home depot head

Very helpful. Thanks. I needed to cut the press on washer as well. Stupid design.

Thanks for the video. I have a Jura Impressa J6 with a grinder like the one in your video. It wasn't working...no beans going into the grinder, so I replaced the grinder burrs. This didn't resolve the problem. Similar to someone else who left a comment here, I'm getting a "Fill Beans" error message even when there are plenty of beans in the hopper. I cleaned the sensors so they shouldn't be blocked (looks like there are two sensors that shoot a beam across the hopper to check for beans). I didn't need to replace the burrs after all, it's something else. I've taken the grinder apart a few times now to see what I missed and can't find anything wrong, but it's not feeding beans through and I'm getting the "Fill Beans" message on the screen. Sounds like this might be a semi-common issue. Any ideas?

Hey! Not sure what search terms I needed to find you first but all the tutorials want to teach how to replace the line. Thanks for the video. Just wanted to see somebody else f*** it up before I did.

Help! Husband ordered top hinged cover replacement but it doesn't have instructions on how to install. Current cover hangs on one hinge when opened. Hinges look delicate so afraid to torque on them. Do I have to remove back? Do I need to order tool to open once back cover is off? Fingers crossed your not on the golf course.

Dude I fucking love you!!!!

Perfect, thanks!

I am definitely going to make one. Instead of the hole I am going to make a slot for bolts with washers and wing nuts.

How do you add the string to This attachment

REALLY UNSAFE RELYING JUST ON THAT HYDRAULIC JACK WITHOUT A JACK STAND OR BLOCKING UP THE CAR. SAFETY FIRST PEOPLE.

Where did you get the replacement head from

Hello great video. What do you do when you took it apart, and discover there are no markings?

A big thumbs up!! Thanks for that.

IM MAKING ONE TOMORROW. IM THROWING A LIKE AT YOU

Great helpful video Thx, Q: do i have to buy the Strut with the coil or with out the coil (mount Assembly) ?

is it possible to replace only the motor? looking at an ENA9 micro where the grinder doesn't run and "fill beans" message appears. Hoping the chute is clogged, but if not then hoping i can rebuild with new motor instead of spending $400 on new grinder assembly

You will probably want to cut your side rails back a little more to allow for angles larger than 45 deg. which are quite common, especially on outside corners. I have seen outside corners measure 94 deg. requiring a 47 deg. miter cut.

I went fishingn yesterday spent 7 hrs only catch was 2 small catfish 1 stingray

What a very stupid manufacturing build this model

Thank you very much even after 2 years still very helpful❤

Vertical hell is waiting for you.

How to replace On/off switch!?

Whoever gave the green light for this design, l'd like to kick his ( their) rears from sun up 'till sun down on every other Sunday.

HOW DO YOU LOAD IT!?!?!?