Відео

Yes,so do I Doug👍. I've found to more rally gt's for the rear👍. There the same size as the front ones though so I'll loose a bit of rake but hayho, they'll do till I can get some wide ovals. I'm using the deep minilites on the racing Galaxie,if they'll fit.🤞😃

Rothwell. He is a model car builder. Sheldon Rothwell. I learnt a lot from him ,when I first started👍👍😀😎. There are tributes to two other modellers on this paint job. The 69 is for Ramblers69 and Maddog Merv is driving it 👍😃. The Starliner is an excellent kit and we'll worth buying👍👍😀😎

It's funny Stig. I've just watched it again and having time to think about the cuts, I'm changing my mind and cutting it in different places😂. Seat first,new floor then cutting the Pontiac door cards to fit the Galaxie shaping more, I'll still keep humps and speaker. I really think it's a bonus being able to recap myself by watching my own vids on these projects along with my note book drawings👍

I think i can get away with minor handle differences👍. I've just been watching 4 Galaxies racing on a British circuit absolutely gripping stuff @goodwoodroadandracing. I need more of these👍😃

@@petesmodelcarcustoms584 I watched one of those goodwood races on UA-cam it is great stuff, I love the old cars.

So do I Ted 👍👍😀. Goodwood has really good,up close,shots. Fantastic list of guest drivers. Jimmy Johnson did well this year,struggled with turning left and right,but good performance. It's the highlight of my year plus the drag racing from Santa Pod raceway 👍😃

Not compared to those Cobras 😂😂. I'm changing my cut sequence 🤔to fitting seat first and adding new 1mm floor plates🤞😁

@@petesmodelcarcustoms584 Sounds good. Yes, those Cobras were a real treat, weren't they?

I want to get one of those built too,one day👍😎

@@petesmodelcarcustoms584 It's a great kit.

I appreciate that👍😀. Thank you very much Mike 👍😃

Thank you very much 👍😎

Cheers Stig🍻

She's a 63'the other a 64😁

@@petesmodelcarcustoms584 Gotcha

If I cut carefully it should wok🤞😀

The wire wheels came out well but I don't think they were in focus. I'll find some other knock-offs 👍😃

You too👍😃

I think trimming down the parts will take careful cutting🤞🤔

Thanks👍😎

Thanks very much👍😀

Thanks Theo. The 69 Cobra is getting the chrome slot mags and Goodyear rally gt's 👍😎

Sorry about the ending Shawn😢. I'll do a further update on wheels as they'll get used soon. I've got to do some deep dish steelies in blue aswell. Raiding a Revell mustang for some pad printed ovals🤣🤣

Thanks a lot👍😃I've been sorting out a variety of sets to suit each car🤔🤞👍😎. Thanks for watching,there will be more vids on each build soon👍😃. Best wishes from jolly old England 👍😎Pete 🤓

Thanks a lot. Sorry about cutting the vid off. Ive got a few more sets i was swapping around but they'll have to wait until a further vid. Its always such a hard choice as they change the look of cars so much🤔

It's taking some work adaptingbut I think it'll make a worthwhile difference🤞😃

Have you checked Doug's channel he does some incredible work and may help you with etch,he has a lot of brass experience 👍👍😀

I love Galaxies and Impalas. There seems to have been ,in the late 50s and early 60s a ridiculous amount of styling and trimming on cars. It amazes me. The cost and work it involves to create these styles, I'm glad they had the freedom to do so. Modern cars just don't have class. I've had old Jags and Rovers, and they are luxurious and glide down the road👍😎😎😎

I just don't seem to get the time to tidy up,before I'm off on another adventure in styrene😁

@@petesmodelcarcustoms584 I can understand that. I have a low tolerance for clutter, I tidy up my work area often, sometimes between every work session.

I'd just done that to aid cleanup but since doing it it,I've been caught up in all the patterns. It the early effect of the psychedelic influence 😂😂

@@petesmodelcarcustoms584 IT is pretty cool!

I am still missing Galaxie dashboard🤔😢😁

@@petesmodelcarcustoms584 It will turn up!

Do you watch the racing from Goodwood? They had 4 Galaxies racing there this summer. They were racing so hard one engine blew up😢. @goodwoodroadandracing 👍😎very cool ,classic car racing with top international drivers,👍👍😃.

@@petesmodelcarcustoms584 I'll have to watch that.

A tidy bench is boring and uncreative. Mine is a masterpiece. A wealth of stimulating ideas and invention and a bloody mess.😂😂😂

The weather has been terrible here so I'm trying to get a lot of the basic build done on a lot of kits🤔😃. Happy New Year Craig 👍

Hiya Shawn 👍😃. Doug is an excellent modeller with a great sense of humour and over the last year or so has been making some very detailed models.👍👍. I hope all is well with you and your family with best wishes for the new year from jolly old England 👍😎Pete 🤓

It's got a bit out of hand,Ron 😢. But while the weather's bad I'm trying to get a lot of chassis and foundation work done and hope to spray in spring🤞

Yes,but I still haven't found the dash for the Galaxie 😢🤣🤣

Cheers Stig 👍😃

I'm having some minor alignment difficulties but it seems ok👍🤔

Thanks very much. These kit are not a great deal of money so I happily rip parts from one to another as needed. I might screw it up but I would have learnt a lot. Most of the parts would still have uses.All for less than Saturday afternoon in the pub🍻🍻

Thanks a lot Craig 👍😎. There's a bit more work to swap interiors but that seems to be going well. I hope you enjoy the build and best wishes from jolly old England👍😎 Pete 🤓

I can't stand those moulded tubs. The detail is so soft in them,so I rebuild interiors. Lucky with this Pontiac, great value kit. 👍😃

Cheers Steve. Apart from the rear seat adaption I think this will make a vast improvement simply🤞😀

Thanks Tom. I want to get more people checking Doug's work. I know he's not to everyone's taste though🤔. But,this kit might help,it's always been popular 😃. I did find it insulting that people had blocked foreign entrants to their draws,they only have to pay extra postage if a foreigner won. I've turned down entries to draws because of post charges,but that's my choice not to enter then. Thousand subs is nice but,that's more bull,if they don't watch or comment🤔

I was a bit lucky there. The extra length of the Pontiac will give me more wriggle room,as the actress said to the bishop,to adapt the parts. The back seat conversion ,to adapt the headrests,will make things harder but not by much🤞

Good to hear from you Willi👍😀I hope we share a few more years together👍. Happy New Year and best wishes from jolly old England 👍😎Pete 🤓

Thanks for watching and I'm glad you enjoy what I do 👍😃. Best wishes for the year ahead👍😎Pete 🤓

John at Moparnut 62 laughed at me for even suggesting Pontiac was a Mopar car😄🤣👍. You are very welcome to the model. I thought another Chevy but from an earlier decade,would fit in your collection nicely. I haven't built one but have seen good reports of it,so good luck and fun. I'll be posting it in the next few days and email you. B.W.F.J.O.E.👍😎Pete🤓

It sure is

I think the Pontiac is another kit that's well worth the money. Loads of options and parts. There's a new release which looks good too👍😃

I'm off to bed now. I'm living on Tulsa time again and having this cold disrupt me, it's starting to be inconvenient living in England 🤣. I only just caught the post office before it shut,I didn't wake till 3pm🤣🤣🤣

So are these bloody Pontiacs mopars? I bet you didn't watch to the end,where I ask you🤣🤣

​. Sir Pontiac is part of the general mistake division...err ..general Motors..😂😂😂... Mopars are a far and above a superior product.... As is a reliant robin to a Rolls Royce..😂😂😂... Easy mistake to make I forgive you 😂..💪🇬🇧

And I always watch till the end I just was at a gasp at the question....😂😂😂

@moparnut6286 🤣🤣🤣🤣🤣🤣🤣🤣🤣🤣. I'm laughing so much it hurts. Tell me an early 60s mopar that you do like and I'll do tribute build👍😎. My excuse for lack of knowledge is being foreign and a Ford fan😂😂so no brains and no taste 🤣

My mate had a hot robin,great for wheelies🤣

If I'm lucky,some of my ideas might even work🤣🤣🤣

I do wish they would redo the Galaxie kits,like they have the Starliner, which is now a fantastic model.

Thank you Shawn 👍. Happy New Year and best wishes from jolly old England👍😎 Pete 🤓

Cheers Ted. I've the ideas for colours. Working the pattern will be more trouble. I'm not sure what I'm doing🤣🤣again😄

@@petesmodelcarcustoms584 😆😂