- 173
- 156 056
StyleCAD
Приєднався 15 лип 2015
Adding/Adjusting Buttons
There are various ways to add buttons. In this video, we show you the easiest way to add buttons using the division method. V13.5 allows adjusting the offsets, interval, number of buttons and button display options without having to delete and recreate the buttons. In order for the adjustment feature to work, there must be an internal line that goes through all the buttons
Переглядів: 166
Відео
Clipping Concave Seam with Divide Line or Relative Another Point tools. V13.5
Переглядів 1364 місяці тому
If you have a concave seam, you'll need to clip the seam allowance. This type of seam would most likely be found on a neckline or an armhole curve. By snipping/clipping into the seam allowance getting nice and close to your line of stitching, the tension that exists when you turn the garment to the right side will be released. Use the new option that makes creating these clip lines for the seam...
Grading Scenario 3
Переглядів 496Рік тому
Here we have a forward shoulder style. Grading this forward shoulder area can be challenging but the V13.5 enhancements make it easy. In this video, we will show you how to first grade the shoulder area and then fold out using the flip fool. Then we will show you the second method where the should is folded out first and then grading is done afterwards. The new "Mirror Selected Grading Pts w.r....
Mirror Pattern Operations
Переглядів 356Рік тому
This short video demonstrates how to turn a pattern into a folded mirror pattern and also new enhancement to the M QuickStep and UK QuickStep for Unfold and Keep operation.
Using the Scale Tool to Grade a Pattern - V13 Feature
Переглядів 266Рік тому
The Scale tool already has an option called Scale Grading. Assuming a pattern is already graded, the grading amount is scaled by the specified scale factors in X and Y. In V13, we have added a new feature where different scale factors can be applied to the grading amount for each size. This feature has been enhanced further to actually grade a pattern using varying scale factors per size.
How to Do Double Double Fold Seam
Переглядів 394Рік тому
A double fold seam is a built-in seam type in StyleCAD. However, the double-double fold type is not a standard seam type. In order to create a double double fold seam, the sewing line must be converted to an internal line using the Keep Seam as Base Pattern feature. Then, various tools can be used to add the second double fold shape. In the video, we show all the shortcuts for this process.
Grading Scenario 2
Переглядів 280Рік тому
In this scenario we want to make a shoulder strap with consistent width for all sizes. The parallel tool is used to make the parallel internal line but using the E (extend to outline) option causes the strap to be inconsistent in width. Here is how to make the grading consistent.
Blending Curve Around a Dart
Переглядів 291Рік тому
When there are 1 or more darts on a curve that needs to be blended, make sure to select around the portion of the dart. After making the curve shape change, the dart cap shape will no longer reflect the surrounding curves. Use the DC (Dart Cap) QuickStep method with either the default tool or the Dart tool to touch up the dart cap shape. Simple dragging from 1 side of the dart to the other side...
LOGO image to SVG to StyleCAD Notation V13
Переглядів 276Рік тому
If you have an image of a logo and want to bring it into StyleCAD to be printed/plotted with a pattern, V13's new feature [Fill with Logo (SVG) File] will do the trick. The SVG file is created by using Photoshop. The SVG file is then imported as polylines, scaled to fit the selected internal rectangle and stored as a notation. Once brought in as a notation, it can be easily graded, moved to ano...
Grading Scenario #1
Переглядів 5332 роки тому
In this scenario, we have a shoulder strap section that is centered on the shoulder line. We want to grade so that the shoulder lines remain straight and the shoulder strap width remains the same for all sizes.
Computing Subareas of Patterns
Переглядів 3622 роки тому
For pieces with subdivisions, StyleCAD allows you to compute the area dimension for each subdivision. An Excel Report can be generated.
Improve Automatic Layout Feature for V13 Plot Manager
Переглядів 2602 роки тому
Automatic layout feature has been greatly improved in V13 Plot Manager. In V13, the automatic layout computation may be performed for a maximum of 60 seconds resulting in much better plot paper utilization. Prior to V13, only a single solution was presented. Also, Any Rotation angle feature is supported unlike V12.
DXF Export to Illustrator
Переглядів 2,7 тис.2 роки тому
Many StyleCAD users use illustrator to do their graphics work and printing. A DXF file exported from StyleCAD can be opened in illustrator. Utilize various options. For easy separation of sizes, try using the [Layer for each size] option.
V13 Enhancement to the E QuickStep Feature of the Grading Tool
Переглядів 2612 роки тому
Here we have a jacket bodice pattern with a princess line. Normally the princess line's grading is 1/2 of the side grading. The challenge here is to apply 1/2 delta Y grading to the princess line at the shoulder line and still maintain the shoulder line shape. If we apply the E (extend) QuickStep, the delta Y value changes because of how the princess line is extended/trimmed in the direction of...
Mitre Corner Shape Feature in V13
Переглядів 3112 роки тому
A mitre corner shape is used in areas such as the vent of a men's jacket. This shape can be created with the existing seam tool. However, in V13, there is a simpler method available with the Protrude Outline tool. Using the M (mitre) QuickStep with the width value, the mitre corner shape can be created very easily. Once the outline shape is modified, additional seam allowance can be applied to ...
Adding More Than 9 Points Using Control Point QuickStep
Переглядів 2472 роки тому
Adding More Than 9 Points Using Control Point QuickStep
Making a Skirt Pattern by Measurements in V13
Переглядів 3952 роки тому
Making a Skirt Pattern by Measurements in V13
Making Basic Shirt by Measurements Entry in V13
Переглядів 7362 роки тому
Making Basic Shirt by Measurements Entry in V13
Mosaic Life Scale Printing of Patterns using A4 or Letter Size Paper
Переглядів 7583 роки тому
Mosaic Life Scale Printing of Patterns using A4 or Letter Size Paper
V12 Horizontal Division Automarking with Grouped Pieces
Переглядів 4193 роки тому
V12 Horizontal Division Automarking with Grouped Pieces
V12 Premium AM Feature: Major Pieces Arranged in Horizontal/Vertical Sections
Переглядів 5784 роки тому
V12 Premium AM Feature: Major Pieces Arranged in Horizontal/Vertical Sections
Calcomp Rollup III Digitizer Setup With StyleCAD
Переглядів 2,4 тис.4 роки тому
Calcomp Rollup III Digitizer Setup With StyleCAD
V12 Enhancements to the Dart Transfer Tool
Переглядів 6394 роки тому
V12 Enhancements to the Dart Transfer Tool
Size Notches for Easy Identification of Pieces
Переглядів 2974 роки тому
Size Notches for Easy Identification of Pieces
Marker Salvage/Margin Affects Garment Cost
Переглядів 5224 роки тому
Marker Salvage/Margin Affects Garment Cost
Is this application for this ?
Jaskolski Rest
Lindgren Overpass
Esta Ports
Are your products Subscription based or single payment? Why is everything request a quote?
My style cad label have white block around it. Do you know how to fix it so it ?
Are you referring to pattern labels? What version are you using?
Thenk you
HAY QUÁ
A small correction to the video - switching to the grading mode is unnecessary. The Extend/Trim tool works the same way in the PDS mode.
Need Tukateck software like this vedio.
Sound please
Excellent
Can I take demo?
I have roll up ll GTCO, but I don’t have the driver for install, can you help me with this situation??
Thank you
Awesome tutorial ;)
What key is the LMD key on the keyboard?
What is tabletworks for?
Thank you for the very helpful videos
ua-cam.com/video/npJCpx-DOJE/v-deo.html
ua-cam.com/video/npJCpx-DOJE/v-deo.html
ua-cam.com/video/npJCpx-DOJE/v-deo.html
ua-cam.com/video/npJCpx-DOJE/v-deo.html
ua-cam.com/video/npJCpx-DOJE/v-deo.html
ua-cam.com/video/npJCpx-DOJE/v-deo.html
ua-cam.com/video/npJCpx-DOJE/v-deo.html
ua-cam.com/video/npJCpx-DOJE/v-deo.html
ua-cam.com/video/npJCpx-DOJE/v-deo.html
ua-cam.com/video/npJCpx-DOJE/v-deo.html
ua-cam.com/video/npJCpx-DOJE/v-deo.html
ua-cam.com/video/npJCpx-DOJE/v-deo.html
ua-cam.com/video/npJCpx-DOJE/v-deo.html
ua-cam.com/video/npJCpx-DOJE/v-deo.html
ua-cam.com/video/npJCpx-DOJE/v-deo.html
Cad price
Pls upload arch tool video
What block construction method are they using here? Just out of interest
Your voice is very beautiful 💕💕💕
Can you export DXF files from StyleCAD to use in Fusion360?
Yes you can export AutoCAD DXF format from StyleCAD and that format should be accepted by Fusion360.
I read a lot of good opinions on the internet about how exactly Penlargerem System can assist you get permanent enlargement with natural ways. Has any one tested out this popular natural male enhancement?
What is Penlargerem System and how does it work? I hear many people increase their size when erections with this popular male enhancement.
Does this video have sound for anyone else?
video is good . please show the Digitizer mouse click . its very helpful for all.
In order to download TabletWorks Version 10.10, visit www.stylecad.com/faq and search for "How can I download the GTCO CalComp driver and application..." This is located toward the end of the Software Questions section.
thanks
When I open this window to digitize, I don't have the numbers in the top right box, and I have dialogue boxes below the Erase Pattern that are asking for X/Y 1 & 2 locations. What does this mean? I also do not have the clear white box to the right of the drop down menus, it is all greyed out. How do I fix this?
I want to know this too
Yes
How can I download the cad pattern making software?
you can subscribe StyleCAD monthly.
How can I take online support about style cad
How can I take online support about style cad