Відео

I remember the stigma attached to anything made in Japan back in the 1950s. Their products, except for traditional wood items, were widely regarded as being trash. Over time the Japs got better. Fast forward a few decades and the Chinese began exporting stuff to our country. The inclination, with we older men at least, is to be very wary about quality. I am of the opinion now that in general Chinese made tools and machines could be to notch but they don't get the quality control and inspections in particular that they need before shipping. In this video we see the mis alignment of the half nut on the drive screw. That should have been caught and fixed at the factory. The trouble is that they leave the retail customer to do their quality control. Not good. If I get a new Little Machine Shop lathe there should be nothing for me to repair or replace. Period... Mind you I am not talking about optional upgrades here.

I have been watching these videos long enough to realize these lathes are sold by one group of people who then forward the order to another which does the shipping. Except that there might, just might, be some low level of inspection before it leaves the factory it is not likely that any human being actually opens one up and looks carefully at it. The result is that any errors or defects are discovered by the retail purchaser who then, at his own expense, make phone calls to the company who then, still without having actually seen the latlee, sends replacement parts. This is unsatisfactory. I won't do it. I want to buy a little lathe from a company who inspects the product before it is shipped and repairs it. After all I am not on the payrole am I? This is the reason I am more inclined to buy an American made lathe. Cost more? Yeah but it's an ethics thing with me. When a little lathe comes from China it should not be the responsibility of he or she who puts out the money to do the quality controling. I object to that. Lastly are (almost) all those who do these reviews. Do they pay for the lathe or is the company simply sending them one to use? Does anyone reading really think under these circumstances an honest report will be made? Not likely. When I watch a video with some guy in his shop I want to know that he bought the lathe he is reviewing and not that it is on loan for him to do a "aint it nice piece on". Lastly I think you folks should differentiate between mainland China and Taiwan when you say "Chinese made". The Precision Matthews products have a two year warantee. All of the mainland China products have a one year. This is an easy way to telling what the manufacture thinks of his own stuff. The longer the warantee the higher the qualitee. That's a fact that no salesman can successfully argue over. I still enjoy watching these videos... If I were to buy a mini lathe today it would be the PM1220V with a few accessaries. I do like the German designed lathe Proxxon but it comes in a 10 inch. Not big enough. Sherline? Good quality but they keep their prices a secret on the website so they must be afraid of scaring customers. What will I end up buying, seriously? Probably the low end Harbor Freight and then I'll buy the bed extention to push the capacity out to an acceptable margin. Sure... it's a minimal machine but the price is right and they are easy to modify into something acceptable. I do enjoy a challenge. With Harbor Freight you know exactly what you're going to get... no mystery.

Funny I came across your video today. I purchased a LMS mill couple weeks ago and that had started a series of upgrades and repairs in my shop. I have the exact work bench you got there ( harbor Freight) and I just went through and replaced all 4 drawer slides because they've all failed from the weight of the tooling and usage. Lol. They don't hold much weight that's for sure.

Do you have information on how to take the looseness slack out of the lead screw knob? I am looking at one these lathes and I know nothing about any of it and I thought this would be a great place to start and learn but I hate the slack in the knobs, my drill press and my cross slide vise also have it and I would love take the play out of those as well. thanks.

Appreciate your insight on all this. I’ve been running my own running a construction biz for over a year. I recently got a 30w diode laser and launched an Etsy store. When my schedule is slow with construction I’m cranking out laser products in my shop. I really love running the machine and can see how this “side” hustle could outpace my construction gig with EASE. It’s like having an employee that never needs breaks and can work for 12 hours straight without OT pay 😂. PS I hope you’re monetized by now. The YT income is SLOW in the beginning. It only takes one video to change it all. Keep posting man.

Your UA-cam channel videos are very nice but videos are not fetched by the UA-cam algorithm on their page so your videos are not getting views, you want to solve it?

Very good info. About ready to order my first Thunder Nova51. I have a Xtool D1pro and want to expand and get serious.

would you mind sharing the files for the box you made?

Great review - thank you! Does the Bolt have any issues cutting through 6mm plywood at one pass and full power? Or does it need more than 1 pass? My main concern in going to this machine is cutting through as much as 1/4 plywood (maple, birch, walnut, cherry, etc.) with no charring.

Great video mate. Great advice. Love your content. Cheers Robert 😊

Is the Bolt loud? I have a bigger Thunder like you and it's noisy due to the exhaust fan. Hoping the Bolt is a bit quieter? Hard to tell from your video. Thanks!

Just wondering do you have all metal gears ⚙️ in your lathe.

You would think the little machine shop would make sure that each lathe would be cleaned before it goes out the door. I'm only saying this because they sell all metal gears to help the cheap lathes that are out there. I myself don't have a metal lathe yet. I do have a mini wood lathe and it has been pretty good lathe for an import.

🤩 *promo sm*

We have the solution for the clamp bracket. Once I am back from LBX we will be able to start shipping.

Is the work bed12x20 or the actual cut area that is usable 12x20? If not, what is the max usable cut/engrave space? Thanks!

how fast does it cut compared to a nova 24/60. do you know? debating on replacing the 24/60 with this machine for the extra detail in engraving but i dont want to take a huge lose in cutting ability/speed since a do a fair amount of that

Thanks for your awesome review. Can you please confirm you cut 1/4" ply at 3 inches per second and what power? Also, with tthe 30w RF tube what do you think its equivalent in watts to a Co2 tube? Thanks

Hello. I have the Thunder Nova 35 100 watt like you have. I also have an 80 watt JPT M7 Mopa fiber and a 10 watt diode laser Lasermatic 10 for high resolution engraving but it is so slow comparing to a fiber and my Thunder Nova laser. I also have a Laser Pecker 4 for super portability. Anyway, I was thinking of getting a UV galvo as my next laser but not sure if I should get the Bolt instead of the UV laser. Here are my questions to you. 1. How well does the Bolt engrave on glass , leather/leatherette, and certain plastic? I am concern mainly the glass since the UV laser will be focus on glass. 2. Did you figure out the rotary scratching problem that you mentioned on your previous video? 3. Is it worth it to buy the Bolt instead of a UV laser? I am thinking of buying the Bolt to replace my Lasermatic 10 diode laser due to the much faster speed and able to cut any type of acrylics. I see many Thunder owners buying the Bolt even though they already have another Thunder laser. I think they (including yourself) probably buy the Bolt for the higher resolution engraving, no chiller, fast speed, etc .. However, most do not have a diode laser like I do which I use mainly for high resolution engraving despite its slow speed. My biggest dilemma now is whether to buy the UV galvo or the Bolt. I know that one of your answer will be what I will use the machine for but I am looking for something beyond that reasoning. Thanks. Oh, forgot to ask this: Comparing tumbler engraving, which one produce better result? Bolt or Nova 35?

How think of material can you cut with this? Have you tried any other lenses with it? I'm on the fence between this and the Xtool P2.

Im mainly looking for a laser to start a small engraving business. Im coming from a Glowforge co2 laser. Ive had my eye on a Xtool P2 but saw this! Would you recommend this laser over an Xtool?

Can you post pictures of the key chains and pens that you make

😂😂

Great advice as always. Keep growing & pushing those quality items out

Not today Dad 😂😂

Love the chats congrats on the growth!

Question why you choose a Thunder laser I looking between Aeon laser or Thunder laser any help thank you

Finally someone that gets it. Too many people start with the "if you buy the laser they will come" business model, or, outright refuse to do social media. Not how this business works at all!

Great advice 👍 shout out to the cats

Great vid man. I've tried the fb ads as well and didn't get squat out of them lol. Marketplace and groups are gold mines. :)

Subscribed. Love my laser. It helps my woodworking business.

Im just geting started as a side business. I loved the advise.

Just a question, can this pump can work in both direction?!

...or, you could just let him sleep.

Che video dommerda

Too cute❤😂

Cat and catnip is always a funny reaction.

Promo'SM

What kind of mat did you put between the lathe and bench?

I feel special as I was your 900th subscriber! Great video brother I wish to have one of these CO2 lasers like yours and make a decent living off of it!

Thanks for the business tips! Good luck with your business!

Great advice, as always, Eric. Keep growing

Sugar..

❤❤❤❤❤❤❤❤❤❤❤❤❤❤ 🐱 🐈 😹 😾 😺 😽 🐱 🐈 😹 😾 😺 ❤❤❤❤❤❤❤❤❤❤❤❤❤❤

Honey has a beautician routine. You have to respect it.

Thank you for this I have to try

Asmr voice.

los que no comentarios no lo quieren y yo si lo quiero mucho 👇😊😊😊😊🥺🥺🥺🥺🥺🥺☺☺y ai animales que no tienen ogar

🥺🥺🥺🥺🥺🥺🥺🥺🥺🤗🤗🤗🤗😊😊😊