- 12
- 126 949
MT Airgunner
United States
Приєднався 20 чер 2012
Clean pellets for AEA HP
Cleaning pellets for the Aea HP. Helps with the lead scraps that falls down into the trigger and causes the trigger to stop working.
Переглядів: 480
Відео
AEA Reliably Tuning
Переглядів 13 тис.2 роки тому
Tuning the action of AEA HP www.thingiverse.com/thing:5255373
AEA chrono test
Переглядів 4762 роки тому
Testing the Crossman 14.3g hollowpoints in the AEA. Gun is better at cycling these pellets turned down some.
AEA Reliably
Переглядів 2,2 тис.2 роки тому
Some of the things I have done to help get the AEA to cycle more reliable.
Hatsan Hurcules Bully .25 teardown
Переглядів 15 тис.3 роки тому
Taking apart my .25cal bully to fix a air leak.
PP700SA Oring replacement
Переглядів 6 тис.4 роки тому
Checking for leaks and replacing O-rings. I also show how to take apart the fill port and gauge.
Pp700SA mods
Переглядів 35 тис.4 роки тому
Showing some of the mods I did to my 700. Shot string at the end of the video is with the regulator at 110 bar, this is the max that I have been able to get out of the 700 so far.
Hurcules bully .25
Переглядів 2894 роки тому
Shooting aluminum bottles at 25 yards with the 26g fx slug at 1050fps out of the hatsan hurcules bully .25 cal.
PP700SA Disassembly
Переглядів 37 тис.4 роки тому
Taking apart the artemis pp700sa. Note Huma regulator is now set to 100 bar.
can i set a multishot magazine on my pp700 instead of single shot?
Muito bom seus vídeos. Tem nos ajudado muito aqui no 🇧🇷. 👍🏻
Excellent Job Sir...
Muchas gracias AMIGO, me ayudaste a resolver los problemas idénticos que tenía con la S F. Compat, te agradezco mucho.🤩🙏🏻
yoy saved me i had to get a stuck pellet under the bolt out and wasnt sure how to loosen the butt plate...these AEA guns suck, they break every 30-40 shots
The one thing I wanted to see was how the fill valve came off and you didn’t show it 🤬
👏🏼hope the disassembly of the sf sniper model is similar or close
@@JeanPhilippeArlet it should be really close to the same
gracias por su video tan completo
Why are you taking it apart?
Shakey hands
@TheFowlerAirgunChannel Yes, It sucks when having to work with small things but have always had it so am used to it. It can be better some days than others.
@@mtairgunner4044 have fun plinking! 💪
This was invaluable...thank you! 👍👍👍
Can you put a 700cc tank on the bully?
I also need a box with Spare Fucks in my workshop
This helped. Where do i find the subsequent re-assembly video?
What about the spring that returns it maybe little stiffer and as short as you stiffen it so it has no rebound ?just a thought I don't have that issue ,but it's a good trick .seems we have to repair all aea for reliability!
thanks for you video, I appreciate. I have a malfunction with the cocking handle, because when I try to charge the pellet, the handle is blocking against galarian magazine and I need to move it manually to charge the pellet :/ Has anyone had a similar problem?
I have the same problem, only does it with 2 of my magazines and my 3rd one works fine. There is no adjustment that I can see and haven't looked into it to much because I usually only use the one mag. I will try and look into it more next week when I'm off work and see if I can see a way to adjust or fix it.
I just purchased the Artemis PP750. I'm going to modify the gun through internal adjustments and some modifications. I'm just wondering how many shots do you get from your gun once it's modified? I believe standard unmodified 22 caliber is around 50 shots
Excellent tutorial. Thanks for showing us how.
felicitaciones gracias por la informacion, voy a practicarlo en mi nuevo aea sf sniper ya que solo lo puedo disparar hasta 160 bar. thank you so much
hello, really a good, useful video. If I may tell you, what is the original factory size of the thread on the regulator that is connected to the filling tube thread? and what is the thread size on the air filling tube? Is the thread on the regulator M18*1.5 in diameter and the thread on the air filler or large bottle M30*1.5? Is that true? Thank you for helping
Thanks, I'm not sure on the thread sizes and have given this to my father-in-law so do not have it anymore to check. You might be able to find out on gatewaytoairguns site there is some really good threads and info on the 700 there
@@mtairgunner4044 okay, thank you for the advice, hopefully you will always be given goodness, thank you
Do those air blockers work and do u have any for sale?
These do really help with the cycling and not chewing up the magazine. I don't currently have any but if you know anyone with a 3d printer I have the file on thingiverse.com. also was told that a empty. 22 casing will fit perfectly.
@@mtairgunner4044 yes i tried the empty .22 shell casings with a little tape to make them sit snug in there. It work fine. I covered 4 holes and noticed the firing pin does not slam like it used to. Thanks.
Hi Great video but can you make a video about how to lubricate and clean an Artemis pp700sa? It would be very great cause i haven't found anything anywhere about lubricating and cleaning of artemis pp700sa
Hello, I try to find a replacement for the screw of the regulator 27:27 does anyone know the size of the screw or its specifications for buying a replacement that can fit in, please help me.
Fantastic job!!! And no stupid music. Just great video content that’s informative and step by step instruction. Thank you!!!!!
Ara Challenger pro desasambi
In the lapse of time 2:08 that screw i my rifle was broken and I can’t find it any help to buy it in somewhere!!
You will have to contact Hatsan and see if they have a replacement or where to get one. On hatsanairgunsusa.com they have a number to call or a form that you can fill out.
Any reason why my hp ss 22 leaks air out barrel and won't fill
Broken valve pin is the most common with those symptoms. If you have warranty left I would contact who you got it from and they will send you a replacement. If your out of warranty time frame you could check ebay there was a guy selling improved valve pin replacements. I haven't used them but have read some good things about them.
Vstar1100pw is the sellers ebay name
These pistols are brilliant... So tuneable..
To make the barrel "thread insert" to stop spinning. Remove the screw from the rear sight and insert a longer screw. That screw will bottom out against the outer threaded part in the breach of the barrel and will stop it from rotating when mounting the barrel. Just bought one of these pistols and it is suprising how accurate and easy to tune this thing is.
Can you adjust the hammer spring to increase power?
А нагреть до 80 градусов мозгов не хватило? Никогда это не повторяйте.
So adjusting the regulator and hammer spring should be good enough to increase velocities?
Yes, to a point you will see some increase.
@@mtairgunner4044 I think I should be able to get it to 600-640fps with 16gr by just adjusting screws; is the aftermarket regulator a must for it? Forgot to mention, I was unlucky to buy a Canadian version that someone imported to US, so it’s very slow, gets 460fps with 16gr
@sunnesonne The stock regulator is OK, just worth it to upgrade when it goes bad. Being a Canadian version you might not see any increase without drilling the transfer port.
@@mtairgunner4044 I think it should be 4.4mm hole
@sunnesonne I can't remember for positive the size but that does sound about right
Здравствуйте, подскажите где можно приобрести такой регулятор давления
those is cool take care all the rats in the backyard
good . i like it
Excellent video, thank you for the information.
GREAT VIDEO!!!. we need more breakdown videos like this. It is very helpful. But more often than not all we ever find on UA-cam is bias paid reviews on most things. That have very little information other that how far it will shoot lol. Good job keep up the good work
verry , verry good job !!!! Thank You . greatings from thomas / BERLIN-GERMANY
Same thing happens with .30 cal HP SS PLUS, so will try your fix to see if we can get better shooting. Thanks.
THIER GUNS JUST DON'T WORK PROPERLY. THE TERMINATOR IS A TOTAL BUST!!!!!!!!
Those little fingers playing with the ruler... All the best to your little helper!
That thing you called a piston is adjustable. Mine came adjusted about an inch away from the thing where you put the plugs at the front of the barrel. The adjustment will do a better job than the plugs. Im shooting the 18,13 gr Diabolo witch i think are slightly longer than the Crossman
What's a good Oring kit? I bought one from Lowes and nothing fits
You can order individual orings from the oringstore.com, harborfreight.com also has some big kits 1 in a blue box and 1 in a red box that I have had good luck with.
@@mtairgunner4044 I appreciate it!!
funny many of you call it a moderator, to me that term is too generic, that's why we call it a 'silencer', more specific and clear don't you think?
Normally I call it a silencer, but online I call it moderator as some people get upset over it. They say it mixes airguns with powder burners 🤷♂️.
@@mtairgunner4044 lol. Why would it matter as both serve the same function.. I have a Silencer from a 222 in my 6.35mm air rifle so should i call a moderator to the site :D "purists" are one of the most annoying people around.
I have changed my valve pin like four time and Bin Tac sent me a better valve pin this time, but now when I changed it out my gun is leaking out where you put the fill probe in. I guess that I need to figure that out now. 😮💨
This brand seems to be a lot of work, but fun when it does work. If this valve pin doesn't hold up you could try ebay seller vstar1100pw. He makes a upgrade valve for these. As for fill leak it if I remember right it should just be an oring inside the the air cylinder piece that your fill probe goes into. Will need a Allen key to pull out the little screw. Sometimes you can also snug up that screw a little and will stop the leak also.
Здравствуйте в Россию отправите клапан и редуктор ?
Very informative…..thank you sir and the little one is amused 😂😂😂
Hey i wanted to ask, for the transfer port part, you unscrewed the bolt with the flathead screwdriver. I was wondering where can I buy that pin/nut/bolt or whatever the name is called?
I would message Terry at fox air power, he might be able to get you the replacement part you need. foxairpower.com/pages/contact-us
the tube looks thin, how many mm thick is it with how many bar working pressure?
Its a great 👍 video.... Thanks for the idea 💡
What are those cones for?