Відео

You have a message on yours how do you get it off? Needle threader did not work either. T ook me over an half hour to thread by hand. I shld never have bought this machine.

I had the bobbin door off and now that is on my screen and can't get it off. Machine won't sew and I have had for years never used it. I know its because I do not know how to use it. I unplugged it and all to get that message of the screen to no avail.

Great! I think it fixed my problem. Maybe it was the fluff?

The issue that I have with my Baby Lock Unity machine is that it stops every 22 stitches. Then my screen has a message that states to retread the upper thread. I have rethreaded & this continues to happen every 22 stitches. I have this same issue with embroidery and straight stitching. Is there anything I can do on my own to fix this?

I have an old Ellageo Plus and I love it, but one problem I started having is the presser foot starts going up and down on it's own. I'll push the button to lower it and before I can start sewing it pops up again and then it will go up and down for a while. I have to wait until it stops for a minute and start sewing . Once I get going it's okay, but if I stop sometimes I have to wait quite a while for it to give me a chance to start sewing again. It's possessed! Anyone else ever have this trouble. My machine has the latest sofware and I'm not a constant sewer so sometimes it sits for a long while before I use it but I keep it protected.

Thank you! Fixed it!

Omg thank you soooo much! Such a simple thing that was not in my entire Manual as far as I could tell.

Thank you so much - this four year old video just saved me a bunch of money. My two year old Babylock Brilliant kept binding up tight. With your instruction, I opened it up and found the needle was punching through the bobbin case! Fixed all that and cleaned it up and so far, so good. I still don't know why that was happening, but for now I'm on my way again 😁

Having serious thread shredding so gonna try several things. Love your shop. Am in Morganton and come to you for all my needs. Hopefully I can solve this issue. Drives me nuts

Mine is frozen. Safety device activated.

Thank you! I had already tried all of the steps you mentioned EXCEPT I didn't notice a tiny needle hole near the "hook" part of the bobbin case. I filed it down with an emery board and now it works! Thank you so much!

I have a babylock brillant, and I'm frustrated because I keep getting a 'safety alert' & an alert to 'attach my needle plate'. What could be causing this?

I absolutely hate my Baby lock jubilant machine. I purchased it 5 years ago and have never been able to do much of anything with it. My main compliant is the presser foot holder which is impossible to get back on after it falls off. I have spent hours working on this. The screw is too short and for a left handed (or maybe every?) sewer it is migraine-inducing process to line up and tighten screw. I’m so sorry I ever purchased it.

I cleaned my bobbin area "everytime" I start my day of sewing. The last 2 days have thread breakage and stitching is skipping. I've changed thread, needles triple cleaned gain. I have hated this machine since purchased 7 years ago. It was serviced in April of this year 2024.

Thank you, I will try this

While that is nice, I use painter tap, which I already have.

O my, that a lovely Bernina.

Don’t pull out your thread that way

Thank you so much! Helped fix my problem without having to pay a ton of money and be without my machine while it gets serviced for a second time in 5 months!!

So glad I found you!

Machine locked up.

Thank you

How do I keep my thread from knotting up when I first begin a seam

I turned it off and completely rethreaded it and STILL E1 FUCKING ERROR. BABYLOCK IS THE WORST BRAND EVER!!!!!!

My bobbin stitches are really loose and uneven. Is there an adjustment for this? I only know about the top tension.

Thank you! Your instructions are so easy to follow and complete!!!!❤

This worked! I’m back to sewing instead of servicing my machine! Greatly appreciate 🎉

Thanks for posting the video. 3:26 What's the sound there? Was is a normal/healthy sound? Trying to understand the BERNINA 9 hook system.

On my baby lock Jazz11 bring thread up to number 5-4 thread broke cant get to ouy too tight to pull

Thank you! I know it has been a few years since you posted this, but very appreciative. Have a happy holidays!

Just that little knick was kicking my bobbin out?! Thank you for your help 🙏

I keep getting an error: turn off and replace plate. Can you help?

Thank you for sharing this video! It is so helpful!!

Hi! You had me at “re-thread”. Found out the hook was missed, all good now - thanks!

Thank you! I learned new things today!!!

Thank you so much! My needle is hitting the metal circle case that the black bobbin holder sits in. How do I adjust it so the needle will go all the ways down and not hit the sliver case?

Just found your page and I am so happy! I am still getting to know my Baby Lock Ellure Plus and a bit frustrated!

I failed to thank you for the tips in the video! Your instructions were clear and concise! I will try cleaning underneath and give it a try again! Thank you so much for your instructions and I have subscribed to your channel and told a couple of my sewing-friends about you too!

I stumbled onto your video on home-maintenance for BabyLock sewing machine. The machine looked very much like my Flourish II. Just yesterday I had trouble which the following statement appeared in the window: "the safety device has been activated. Is the tread tangled? is the needle bent? Didn't break needle but replaced it. Thread is bunching up under the bobbin. Have turned off machine for 15 minutes. My project is: embroidery on a rope coaster using just a single initial; I've already done 10 seamlessly. Using a Jean needle. I have slowed the machine to 500 (just on the last attempt. Has been hard to find the screen on how to do that). How do I unlock the machine? I bought the machine just as Covid was shutting down companies. I got one lesson under the belt b4 they closed. I have just started regularly using the machine a couple of months ago and haven't had issues. I just heard I was supposed to take the machine in yearly for a check-up (is that right? or how many stitches you've done?). Dealer didn't tell me to do that so, I haven't done it. Please help me if you can. Sorry for the long text!

I am looking for videos on Baby Lock Tempo . I bought a used one. I printed the manual but tutorials would be awesome.

My Babyloc verve fabric gets stuck every time I sew

Thank you so much for this video. Please see if you can answer my question, maybe you make another video on this subject. My needle is not centered anymore. So: How can we center the needle ? I found various videos in this subject but for different machine which are not the same as Babylock. I have a Brilliant model. TYIA for any help you can provide !

One million thousand likes.. thank you 😊

Hi my question is why wouldn’t my bottom bobbin thread come up when I’m trying to free motion quilt. I have checked and rechecked all the steps and the bottom bobbin thread will not come up. I have the blm melody baby lock. I would appreciate any feedback you might have. Thank you.

Hi, would you by chance now how to help with my babylock sofia 2, the sewing machine is sewing in reverse, I am wandering if my reverse button is stuck, do you have any ideans of what I can do

How do you turn off zigzag contoll?

I have a baby.locķ eclipse dx and suddenly 1 of the air ports is not feeding h is there so etching I can use to clear the fingers

I am having trouble with my bobbin casing. My thread is jamming up on the bottom. I’ve tried resetting tension. I’ve tried cleaning out the Bob and I don’t know if I put the bobbin back in wrong or if it’s I’m not quite sure how to put it back in since it does not show you this in the book. Maybe you can help me in this area I sure need it.

Thanks so much for walking me through the reinstall for the bobbin threader. I’m a new sew-er and still just getting familiar with my Presto 2. Whew! Your video was a lifesaver. 👍🏼

Thank you! My needle was stuck and I took apart the whole bobbin apparatus. Then needed help putting it back together. Thank you!!