Відео

A quick question to everyone I'm using b.i.n on fresh stair case just need to ask you do I have to do undercoat on it before I do top coat

They made this far too thick to be able to use effectively

It is also thin as water and will splatter everywhere, good luck if you get it in your eyes. I would NEVER use BIN to prime interior walls unless you needed it for stain blocking.

I tried this on a water mark on a white ceiling and it dried a yellow/creamy colour. Is this normal or should it dry white?

Hi Zinsser, what model of Wagner airless sprayer is being used in the video to apply Allcoat. Does it need thinning with hvlp?

Used on my fibreglass camper van roof,and lasted well.

Blockade is just as good and much cheaper…

What’s the best paint for exterior house walls

Can I use this on top of varnished plywood panels which are going to be wallpapered using paste the wall wallpaper? I'm in the UK. thanks

Covers the stain then you cant cover the bin itself without it showing through. If anyone knows how to cover it without having to paint the whole surface in bin let me know.

This stuff does NOT work over oil based paint in spite of what the can says. I sanded thoroughly with 220 and wiped with toluene. It comes right off. I have major work now to remove it from multiple doors and door frames to start over. I was a fan of this product because it works on bare PVC. Save yourself some time. Sand and use oil based primer if moving to latex paint. Unfortunately, this isn't a viable solution for going over oil.

Can Cover Stain be thinned? If so, what with. I’ve got half a tin that has got thick over time. I presume something has evaporated from it!

Need to coat bare MDF shelving. Questions: 1) After using 123, can I get away with NOT painting, considering you specify an "Eggshell" finish at amazon. If not, exactly why not? Can the 123 finish stand up to cleaning the shelves with a wet cloth? I don't need any decorative paint. 2) Does 123 seal in the out-gassing of the formaldehyde from the MDF?

It didn't adhere to my doors and door frames, scratched off with a fingernail. Zinsser BIN does adhere though. I would reframe from advising it adheres to glossy surfaces.

Shit product. Primed back sides of cabinet doors w it in my shop came back 30 hours later and it failed a finger nail test badly. Other oil based primers…even oil based kilz works much better. I only tried cover stain at the advice of a 40 year paint salesman.

I paint brass model trains and Zinsser 123 can be sprayed with an airbrush using isopropyl alcohol as a solvent to thin it for the air brush.

No point asking these guys anything. They never respond. All they do is sell useless fake products and take your money. Comments are disabled on many of their PROMO UA-cam vids because of how much negative feedback was being submitted. Zinnser Gardz and Peel Stop need to be taken off the market immediately....with more of the products to be investigated for actual useability as soon as possible.

There is simply going to have to be an industry investigation into the whole of the zinnser product range. These guys are complete snake oil merchants. Zinnser BIN is reacting with everything it comes in contact with. Zinnser Gardz is the expensive answer to a question nobody ever asked. And the biggest con of all is the ridiculously useless product called Peel Stop. It has never in the history of painting stopped any old paint from peeling. Paint has stopped peeling in spite of it being used is fair to say. Professional painters with years of experience that I have spoken to , would not allow a zinnser product inside their van , let alone use one. And why have comments been disabled from some of their promotional UA-cam videos ???? The Peel Stop vid has comments disabled , but I remember before that happened and deading how the company were getting slated for how disgracefully useless the product was....some even saying how much damage to existing paint work it caused. A paint product with comments disabled ??? That's fishy to begin with. Something needs to be examined urgemtly , and claims that the company make to take hard earned money from DIY enthusiasts need to be verified.

1.5x speed. Your're welcome.

Do we need to mix it with water or just use it right away?

I’m still getting bleed through on light oak.

I used it and it peeled off despite all proper preparation and first coating with Zinssers recommended undercoat. My advice is avoid.

Hi. Can soil then be put up against the cinderblock once the two coats have dried

About to use this on some Maple Wood twin beds from my great great grandparents. (Typically wouldn’t paint wood, but a lot of the posts were eat up with pine beetle holes and busted so I had to build it up with wood filler bondo) so it won’t look good stained

Given that Zinsser has seriously good obliteration qualities, why in Swansea did she wipe off the coat she'd just spray-applied? Seemed a bit odd to me.

Can you paint over this primer with a water-based exterior paint?

That bloke with the beard has quite a high pitched voice!

It’s not anti-corrosive though?

Ridiculously priced now! I thought it was pricey pre-covid, but worth it. It's an awesome product! But now, over $75 per gal at the big box store!! I'm having to disregard some of my projects, it's just not worth it anymore. And yes, I understand a lot of the price hikes were due to supply & demand during the height of the pandemic but, a lot has recovered and resumed to standard business, these prices are not necessary now.

Do not mix 123 with 123plus. Even though they are both water based zinnser products do not mix. Ill tell you how i know... i did it not realizing the difference and the results were a bucket of primer that started to solidify within minutes. It nearly plugged up my airless but i caught it and cleaned it out in time.

You'll never stop mould

Self priming but not on bare plaster ? How's that like? Just piss it get it on

Can I use this on wood ??

Can this be used on a concrete bathroom floor for tiling?

Can it be used on the ceiling and should it be sanded afterwards?

Can I apply to woodwork trim that initially had oil baed paint on it, was painted over with water based paint and that started to peel?

The price is insane, compared to three years ago!

They've made your hair look pink. Nice!

Looks like it has to be applied at night then...

Using on spackle on flat paint. Can I paint the flat colour overtop the same day?

Substrate

Can you use latex paint over top of it?

Fibreglass ?

Friberglass gelcoat ?

Believe me this does not work,no such thing as no rubbing down ,this crap ruined a job I did ,as it started peeling when knocked.

What about wood is rusted still can i use it ?

Can I use it over polyester body filler?

This stuff has the consistency of yogurt. It isn’t supposed to be thinned but you kind of have to.

Purchased 2.5l of satin. Can I tint any leftover to cover about 2m square