- 15
- 32 925
Rob Wallace
Приєднався 30 жов 2007
There is no shame in being happy, if something makes you happy just do it. :)
Roker Pier 5 8 21
Unedited ride of Roker Pier, a little history thrown in too. I must book the tour at some point as I would love to walk the Tunnel and see inside the Lighthouse.
Music from Uppbeat (free for Creators!):
uppbeat.io/t/all-good-folks/work-it
License code: CIGZ91HCQWUXA07I
uppbeat.io/t/hartzmann/take-me-there
License code: EQLSVIWQAWEFC3DJ
uppbeat.io/t/sonda/were-in-it-together
License code: PH03SVNPBLHZHFTX
uppbeat.io/t/ak/monday-morning
License code: Z3VUBYTHU3ZZL9HA
Pics used are not all my own, some sourced from Sunderland History sites for relevance only and not for profit. Fascinating to see.
Music from Uppbeat (free for Creators!):
uppbeat.io/t/all-good-folks/work-it
License code: CIGZ91HCQWUXA07I
uppbeat.io/t/hartzmann/take-me-there
License code: EQLSVIWQAWEFC3DJ
uppbeat.io/t/sonda/were-in-it-together
License code: PH03SVNPBLHZHFTX
uppbeat.io/t/ak/monday-morning
License code: Z3VUBYTHU3ZZL9HA
Pics used are not all my own, some sourced from Sunderland History sites for relevance only and not for profit. Fascinating to see.
Переглядів: 29
Відео
Roker Seaburn South Shields 5 8 21
Переглядів 203 роки тому
A good ride out leaving Washington heading for the coast, taking in the sights of Roker, Seaburn and South Shields and then return. A bit longer than usual but loved the ride out and hope you like the upload. Music from Uppbeat (free for Creators!): uppbeat.io/t/all-good-folks/work-it License code: CIGZ91HCQWUXA07I uppbeat.io/t/soundroll/enlightenment License code: NFUSDLVRVEM7EI7T uppbeat.io/t...
Lumley Castle Finchale Priory 21 7 21
Переглядів 123 роки тому
Fortunate to live where what I believe is the best part of the UK, we have so much open countryside and history in our area and its all on our doorstep. Hope you enjoy the video. Music from Uppbeat (free for Creators!): uppbeat.io/t/all-good-folks/work-it License code: CIGZ91HCQWUXA07I uppbeat.io/t/cruen/in-the-now License code: EWAUGBSPJTAQ3BN4 uppbeat.io/t/capturez/shimmer License code: 1JSRD...
Angel of the North 4 6 21
Переглядів 183 роки тому
Angel of the North ride out in early June, everyone has seen it but up close its impressive a credit to Antony Gormley the Architect and the Teesside Steel men who manufactured it. Music from Uppbeat (free for Creators!): uppbeat.io/t/atm/follow-your-heart License code: 7NTIENHBXO6IQ4BF uppbeat.io/t/mountaineer/refresh License code: 9DOSEWINAVTMMN7R uppbeat.io/t/sonda/were-in-it-together Licens...
eMTB Reminiscing My Past 29 5 21
Переглядів 243 роки тому
Feeling a little nostalgic I set off around some of the places I have lived during my time here on this earth up to now, hope you enjoy it :) Music from Uppbeat (free for Creators!): uppbeat.io/t/mood-maze/trendsetter License code: X1CWCPKQOSNNZADP uppbeat.io/t/soundroll/tropicana License code: ZBUP9OT3MVFOCBPE uppbeat.io/t/atm/follow-your-heart License code: 7NTIENHBXO6IQ4BF uppbeat.io/t/sonda...
eMTB Roker Return via South Hylton
Переглядів 263 роки тому
Using the C2C route East from Washington we made our way to Roker Pier, after a brief stop we returned over the Northern Spire Bridge, South Hylton, Cox Green then home. 22.93 miles travelled. Music from Uppbeat (free for Creators!): uppbeat.io/t/hartzmann/clear-sky uppbeat.io/t/mountaineer/good-old-tape uppbeat.io/t/soundroll/tropicana uppbeat.io/t/zayner/falling uppbeat.io/t/atm/follow-your-h...
eMTB C2C Northern Spire Bridge
Переглядів 353 роки тому
First run out with a Go-Pro making use of the C2C Eastbound from Washington, heading for the new Northern Spire Bridge over the River Wear and back through South Hylton, Offerton and Cox Green. Plus points - loved the ride out, quite mild and the rain held off. Minus points - improve my Camera use and direction (too low), take spare batteries - they ran out just before Offerton ! and finally my...
eMTB Ebike Conversion
Переглядів 3473 роки тому
I converted my Trek Marlin 5 MTB to an Electric Ebike, not totally straightforward but with a little thought it was done over a weekend with a few hours each day. The issues I had were I never checked to see if the kit was Cassette or Screw on Freewheel hub, and the space I knew would fit the battery I ordered only one of the Bottle Mount Screws lined up the second was too low, I had to mark up...
eMTB Easy Ebike Lights
Переглядів 30 тис.3 роки тому
Recently Electrified my Trek Marlin 5, after breaking and losing lights in the past I decided to fit Electric lights run from the Ebike battery. Searching for a set was like dipping you toe in the ocean as there are lots on offer but little info, I was apprehensive at first as there is little info on wiring them and how they work and I hope my video will ease anyone's anxiety as they are an eas...
Stepcraft 1st laser Test
Переглядів 3406 років тому
First Laser test with a shout out to the helpers Rory @Stoney CNC and Hugo's tutorial or I would have still been head scratching!
GTR Engine Table Build Circular LED'S
Переглядів 496 років тому
Building my GTR Engine block table and putting together some LED lighting to add something a little different to it.
Stepcraft Wood burning First Attempt
Переглядів 2697 років тому
First go at Woodburning CNC Stepcraft style. I decorated a small Balsa box for my Wife's "stick things" .
Stepcraft noise test
Переглядів 5337 років тому
Asked if the added enclosure made much of a difference to noise levels, although not a scientific test the difference is very notable, have a listen and decide for yourself.
StepCraft 600 CNC March 2017
Переглядів 1 тис.7 років тому
Our first venture into the world of CNC with the Stepcraft 600
Stepcraft Linda's Edge lit Peter Pan over London
Переглядів 877 років тому
Created with Stepcraft CNC.
Ive recently bought this kit, the electrics were simple enough to figure out but what i cant figure out is how youavtually fit the front light to the bike?
The silver bracket on the lamp unit is secured to what would be the front Caliper mount on the front forks if that's any help
Does the horn work when the light is off mode
I have only every used it with the lights on, I will have to check and get back to you.
As long as the Light unit is on (not lit up) the horn will work.
Your video is very helpful as I am deciding if I want to tackle this job. You made it look fairly simple. Appreciate the way you explained everything also. Thank you!
I’m very confused, my controller doesn’t have a female white piece
Brilliant video. Much much appreciated!
I'm building a mongoose cx24v450 and swapped the motor for a 48v 2500w motor, controller and battery set up and wanted to add lights and horn for safety and thanks to this vid it was a breeze. Thank you!
Thanks for the feedback, pleased it helped 👍
hola en español gracias
Gracias.
question! does that wire work on a 72v system? idk if my controller's light cable out put is 12v but the build itself is for 72v system im just wondering if i can use that wire to hook up my 72v lights
Checking back on the advert it states the front LED with built in horn is 12 - 72 volt but the rear is 36 - 60 volts, hope that answers that for you 👍
Thank you for your video. I have a question. I think I can connect brake lever with the wires. Then, where can i connect controller brake wire to?
The Male plug from the rear lamp unit (blue/white wires) connects to the Female (red/x2 black) with the link wires going to your brake levers.
Is there a fuse for the headlight? My headlights won't turn off I'm wondering if it's a short or blown fuse
No there is no fuse, you could simply unplug it until you can find the source of constant power ie:-switch !
@@Makemrule1973 the switch don't work to turn off the light I'm wondering if that's the problem..but for now I'll take your advice and disconnect it from the controller..
Its been a few months since i used this video to hook mine up and just wanted to say thanks for the help. I made a video myself rewiring the harness to bypass a controller to plug in brake wires directly 🤙 black to one side of the brake switch and grounded the other side of the brake switch to the light kits main ground off the power plug. Been working great for months now 🙌
what make of lights are they?
Tbh I do think they are a generic China unbranded set that some add their own branding to.
Brake levers don't work :/ the light is on for no reason and the brake light is always on
Sorry I never did get around to installing Brake levers so mine have never been connected on the bike, I did try them off the bike and found my headlamp would turn off when pressed ? Being off road I never needed them and have never got around to sorting this out.
The same problem! I tried today and i don't know where is the fault. Have you solved the problem @DyLemma ? 🙏
Ouuu thank you very much!!!! 😬
Can I easily add this to my ebike controller? My ebike only has one power source for the battery, do I simply just buy a 2 way splitter cable so I can hook one to my controller and one to these lights?
That's what I would do TBF, if you do - put an inline fuse in just in case you have a problem. My controller has a power out for this but if it didn't that is what I would have done myself.
How is it connected to the ebike battery?
There is an output from the controller for powering lights etc and your documentation for whatever controller you have will show this.
@@Makemrule1973 what if my controller doesn't have that output? Can I split it with another one? Thank you
@@enygma19 I'm no electrician but if it was me with no 12v from the controller I would tap off from the battery itself using an inline switch so you can isolate it and an inline fuse just in case :)
I just purchased this kit as a plug and play for a Bafang BBSHD. I bought the kit off eBay and installed it 4 days ago. For the bafang kit, there is 1 plug that plugs into the main wire harness and that’s it. It does not use the bafang headlight 5v. So it’s really nice with the exception of the useless turn signals. The headlight is bright, the horn is loud, and best of all, the brake light is bright. The brake light works even when the headlights is off ( as it should). I am super happy I bought this kit. Good Video
Super cheap and easy to fit - still happy with mine :)
Hello. I bought an Yume M11 electric scooter. The scooter came with the rear light broken (the red diffuser ) and because was mounted on the rear fender after a while broke completely. Yume sent me a replacement but now I have no brake light. I changed the connectors between them and the led's are working either 2 either 3 from 5 total which 3 I presume should be for the brake light. I understood that the controller has a low and a high brake wire. Is the high 12V? I will mount a separate brake light but I see other connectors with only 1 wire. It means the wire is only +? If yes which one. And the ground is common with other ground wire? Please help me. [Smile]
how do you mount the rear light on a normal bike?
You may be able to adapt a mounting bracket like the one in the link that fastens to the underside of your seat = www.amazon.co.uk/dp/B0832LRC69/ref=sspa_dk_detail_1?psc=1&pd_rd_i=B0832LRC69&pd_rd_w=U0w32&pf_rd_p=a8d38b47-cfdf-4208-95a0-1af779cb6e7d&pd_rd_wg=4dHzs&pf_rd_r=B8PJDFHP12HBB6VC9PM3&pd_rd_r=ad64300a-f7cd-41ab-aa8a-a0ba654b2ab6&smid=A2I6PGRJX78USW&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyWllSR0czQUZVTTkyJmVuY3J5cHRlZElkPUEwOTkxNDA0VjNYT1NURVFZTUpRJmVuY3J5cHRlZEFkSWQ9QTA4NjI5NzAxNUVBRFJIT0ZEQk8md2lkZ2V0TmFtZT1zcF9kZXRhaWxfdGhlbWF0aWMmYWN0aW9uPWNsaWNrUmVkaXJlY3QmZG9Ob3RMb2dDbGljaz10cnVl
Will this work with a 12V battery?
Roy I would message one of the sellers, my bike is 48v.The kit as advertised states 12-72v front lamp with built in horn - then states 36-60v rear tail lamp with brake and turn function ! Sort of contradicts the first statement, my advise would contact a seller before you buy then at least you have them telling you it will be ok.
Just ordered mine,but my little concern is the turn signal seems weak
Any tips on which wires source the power?
Power is supplied through the white male plug that has x2 black negative wires into one side and x2 red positive wires into the other, depending on your type of controller mine had an output that plugged straight in but others will have to be either remove pins or cut them to connect your pos and neg supply. Shown in the video @ 8.0mins.
@@Makemrule1973 thank you, I'll check it out!
Eh?
Dude you rock! I was just looking at this kit but wasn't sure if I was gonna buy. Well I'm buying it! Great video. I hope to see an update with the brake light jumpers.
Its a bit steep at £50 for the set!
£22 + £5 delivery from Amazon
His intro music blows your eardrums out, then his soft voice is hard to hear anything he says.
Thanks for the comments, new to video editing and blogging and take your comment constructively :)
how about the tail light or brake light how to properly connect the wires to controller thanks
Wow
Thinking of buying myself this set up (Stepcraft 600 with enclosure) for use in the house. Noise is a consideration, but I'll be using their HF-500 Spindle which I think runs quieter. Hopefully I can get away without a proper vacuum setup too and just clear dust from the enclosure as I finish runs :s
Most of my noise is dust extraction, my Kress will make more noise than a HF-500 so if you have an enclosure too your noise level will be very low in comparison. My extraction is now located in the garage piped to my steppy, so all I have now is the suction noise with the machine in the enclosure and I can happily work on the PC in the same room without ear protection now as it was a must previously so you should be fine.
if only I had a garage :p But you gotta work with what you have or nothing happens
I'm lucky to have one, would never fit a car in ever lol.
Very nice video. Thanks for posting this.