Seed Signer
Seed Signer
  • 10
  • 46 497
SeedSigner: Basic Operation
Demonstration covering the basics of using a SeedSigner. This video goes over:
. How to create private keys
. How to set up a wallet
. How to spend from a wallet
For more info, visit:
seedsigner.com
Follow the Project on Twitter:
x.com/SeedSigner
Join our Telegram Channel:
t.me/joinchat/GHNuc_nhNQjLPWsS
Переглядів: 1 593

Відео

Open Pill Mini (w/ Faceplate) Assembly
Переглядів 8 тис.Рік тому
Demonstration on how to assemble this enclosure from components. Additional information on the SeedSigner project can be found at seedsigner.com/ More technical information on our project can be found at github.com/SeedSigner/seedsigner/ Printable files to make this enclosure yourself are also available in our GitHub repo. If you’re interested to purchase an enclosure, they are available at btc...
Create and Spend from a Single-Sig Bitcoin Wallet with SeedSigner & Specter-Desktop
Переглядів 6 тис.3 роки тому
How to import a seed into SeedSigner, export an extended public key to Specter-Desktop, create a single-sig wallet, and receive/send testnet coins. The faucet used in the video is bitcoinfaucet.uo1.net. You can learn more about SeedSigner at github.com/SeedSigner/seedsigner or seedsigner.com, or join our Telegram group: t.me/joinchat/GHNuc_nhNQjLPWsS
Generate Seed Checksum Word & SeedQR Manual Transcription
Переглядів 7 тис.3 роки тому
This is a demonstration of how to generate the final checksum word for a Bitcoin seed backup phrase, as well as how to manually transcribe a QR code representing the seed so that it can be easily imported back into SeedSigner for subsequent use. For more information on the SeedSigner project, or for the 12- and 24-word seed phrase QR templates, check out github.com/SeedSigner/seedsigner. More g...
Open Pill Assembly Process
Переглядів 9 тис.3 роки тому
This video illustrates the assembly process for a SeedSigner Bitcoin signing device using the “Open Pill” enclosure. More info on the project can be found at seedsigner.com or github.com/SeedSigner; specific questions can also be asked in our Telegram community: t.me/joinchat/GHNuc_nhNQjLPWsS
Pi Zero Soldering Technique Demonstation
Переглядів 1,3 тис.3 роки тому
Unedited video demonstrating my technique for soldering GPIO pins onto a Raspberry Pi Zero. If counting from the top-left, pins 2 and 10 are always the most challenging. If you are able to get the solder wire to the opposite side of the soldering iron, the solder will usually pool nicely around the pin. My iron is set at 425F, but I am running a vacuum near the workspace to eliminate fumes; bef...
Specter DIY Assembly w/ Barebones v2
Переглядів 1,6 тис.3 роки тому
How to assemble a Specter DIY Bitcoin signing device with a Barebones v2 enclosure.
SeedSigner Build / Orange Pill Assembly
Переглядів 9 тис.3 роки тому
Follow me on Twitter @SeedSigner for information on the project... Or check out the repo GitHub at github.com/SeedSigner/seedsigner
Multisig Demo w/ SeedSigner 0.3.0
Переглядів 1,7 тис.3 роки тому
How to set up a 2 of 3 multi-sig wallet using SeedSigner and Specter-desktop. More info on the project and binaries at: github.com/SeedSigner/seedsigner Follow @SeedSigner on Twitter for the latest updates.
How to set up and spend from a Bitcoin multi-sig wallet with SeedSigner and Specter-desktop
Переглядів 2,3 тис.3 роки тому
Follow me on Twitter @SeedSigner for more info on this project! Link to project: github.com/SeedSigner/seedsigner

КОМЕНТАРІ

  • @j-p-1
    @j-p-1 7 днів тому

    i love the idea to keep the private keys away from all devices, but isnt walking around with that QR code with your private keys an even bigger risk? hope you will still respond since this video is 7 months old :)

    • @seedsigner5695
      @seedsigner5695 7 днів тому

      SeedSigner is intended for long term storage and multisig wallets, not for wallets that are frequently spent from. More info in our model can be found at seedsigner.com/seedsigner-independent-custody-guide/

  • @PassosaFrente
    @PassosaFrente 2 місяці тому

    You are the best

  • @vandogtrailer6701
    @vandogtrailer6701 6 місяців тому

    I love this device. I'm teaching my college age daughter how to Bitcoin. We haven't stepped up to multi-sig yet. And the security model of her living in a shared apartment creates different concerns.This is defintely the next step on our journey.

  • @Bitcoinvalor
    @Bitcoinvalor 7 місяців тому

    Nice! I love Seed Signer! You guys created a fantastic solution to a major problem in this space. My personal experience with the build and operation felt like a graduation to the next level of understanding in my journey with Bitcoin. Printing paper wallets in '17 to this is almost incomparable. Thank you awesome people!

  • @patmagroin9950
    @patmagroin9950 10 місяців тому

    is it that much risky to buy one already assembled?

  • @MyD0j0
    @MyD0j0 Рік тому

    Oh wow… so i thought this was going to actually be the steps that show how to take the word or word’s index to create the qrcode… not a kindergarten color how to

  • @venisani8871
    @venisani8871 Рік тому

    Where do you get that machine? And what is the name of it?

    • @seedsigner5695
      @seedsigner5695 Рік тому

      That's a SeedSigner -- check out seedsigner.com

  • @prapanchulapinyo757
    @prapanchulapinyo757 2 роки тому

    So, no need for spector shield?

  • @Gustavo-wt4qq
    @Gustavo-wt4qq 2 роки тому

    Can i use this device with a passphrase?

    • @seedsigner5695
      @seedsigner5695 2 роки тому

      Yes -- our passphrase implementation matches the bip39 standard used by most other bitcoin wallets.

  • @historion
    @historion 2 роки тому

    Clumsy me, I broke the clamp for the camera cable. Any help? Some glue for electronics?

    • @seedsigner5695
      @seedsigner5695 2 роки тому

      Do you mean just the black retainer bar broke off, or the entire white ribbon cable harness?

    • @historion
      @historion 2 роки тому

      @@seedsigner5695 The black bar only, thank you for your reply.

    • @seedsigner5695
      @seedsigner5695 2 роки тому

      @@historion If you can discern which way the black bar should be oriented, you can actually still use it to secure the ribbon cable in place. It should not come out if you can properly wedge it in its proper place.

    • @historion
      @historion 2 роки тому

      @@seedsigner5695 Thanks a lot once again.

  • @juliend9495
    @juliend9495 2 роки тому

    Awesome !

  • @absoluttchamp
    @absoluttchamp 3 роки тому

    Why aren`t there any entry-level protection into the device itself?

    • @seedsigner5695
      @seedsigner5695 3 роки тому

      Because it is stateless / doesn't store your private keys.

    • @absoluttchamp
      @absoluttchamp 3 роки тому

      @@seedsigner5695 but that means, IF you keep the (seed) QR code and the device together, you leave yourself vulnerable?

    • @seedsigner5695
      @seedsigner5695 3 роки тому

      @@absoluttchamp If anyone gets access to your seedQR or your seed phrase, you are compromised. Accessing the SeedSigner doesn't matter.

  • @MKBontwikkeling
    @MKBontwikkeling 3 роки тому

    This is awesome! Too bad it's almost impossible to get the components

    • @seedsigner5695
      @seedsigner5695 3 роки тому

      Forgive the shill: btc-hardware-solutions.square.site/

  • @martinluthierking
    @martinluthierking 3 роки тому

    this is incredible

  • @martinluthierking
    @martinluthierking 3 роки тому

    did you hand draw that QR code?

    • @seedsigner5695
      @seedsigner5695 3 роки тому

      Yes! Template is in our GitHub repo. : )

  • @eddybaby7196
    @eddybaby7196 3 роки тому

    Can you verify receive addresses on the seed signer?

    • @seedsigner5695
      @seedsigner5695 3 роки тому

      In forthcoming version 0.4.5, will have receive address verification for single and multisig; optional change address verification coming in a version beyond that.

    • @eddybaby7196
      @eddybaby7196 3 роки тому

      @@seedsigner5695 thanks for the reply, love the project

  • @martinlutherkingjr.5582
    @martinlutherkingjr.5582 3 роки тому

    The ink may run over time. I would use a pencil and then laminate it to prevent smudges.

  • @martinlutherkingjr.5582
    @martinlutherkingjr.5582 3 роки тому

    Since raspberry pi isn’t built as a security device is there any advantage to this over purpose built hardware wallet like cold Card or keystone pro if price isn’t really a big concern? Regardless, I do think it’s important that there are DIY solutions.

  • @sauron8563
    @sauron8563 3 роки тому

    A small QR code printer is missing

  • @Ireitsarof
    @Ireitsarof 3 роки тому

    did you use flux?

    • @bitcoinrunners
      @bitcoinrunners 3 роки тому

      It's inside the solder. A think core down the centre of the solder filament. Gone have the days when you had to add it separately.

    • @Gigabyte1002
      @Gigabyte1002 2 роки тому

      Not at all! This is why he's having trouble getting the solder to stick to the pinheader. He needs 3 things; 1)Flux 2)A clean correct tip 3)A little more heat Ugly soldering, but he went slow, took his time, and it came out fine.

  • @Ireitsarof
    @Ireitsarof 3 роки тому

    absolutely amazing interface, love it, congrats!!

  • @John-lz3hf
    @John-lz3hf 3 роки тому

    Anyone else try cleaning their own monitor while watching this video?

  • @donterpleonebtc6895
    @donterpleonebtc6895 3 роки тому

    Where case from?

  • @Marc-Gee
    @Marc-Gee 3 роки тому

    In spectre, right after you signed the send, the spectre interface still said that the txn could be cancelled- which is weird/wrong, yes? Thx for doing the video btw!!

    • @seedsigner5695
      @seedsigner5695 3 роки тому

      Right, using the QR codes, the SeedSigner communicated the signed transaction back to Specter. The final step in the entire process is to broadcast the transaction to the network; that finalizes the “spend”. So that dialogue box in Specter essentially asks if you want to take the final step and broadcast the signed transaction to the network. You could still discard the transaction, and not broadcast it, and the spend would never happen. Hope that helps!

    • @alexanderpa2868
      @alexanderpa2868 3 роки тому

      You can "cancel" a transaction, via RBF, even after submitting it to the mempool by creating a higher fee transaction with the same input(s) as output(s), effectively instantly returning the payment minus fees to where it comes from.

  • @NathanLitwiller
    @NathanLitwiller 3 роки тому

    I'm unable to find the seed qr template on your github

  • @seedsigner5695
    @seedsigner5695 3 роки тому

    One correction, the faucet transaction is likely green because it is an incoming transaction, not because it identified me as the sender.

  • @davidbakin1953
    @davidbakin1953 3 роки тому

    So it's a security trade-off right? Do you remember a PIN and/or passphrase (with a traditional offline wallet like ColdCard) or do you hide the paper copy of the QR code somewhere (perhaps where it will be confused with a bunch of other random QR codes...). I actually like this approach. (I personally think the traditional "stamp your seed phrase into metal and hide that somewhere" is way overdone - what's the threat model? And where are you going to hide that thing? It's _much_ easier to hide a QR code somewhere - for example, mark it directly on some interior page of some particular book on your bookshelves ... or stitch it with a contrasting color thread on the inside of a pocket of some old shirt in your closet ... or just print it on a small piece of paper and paste it to the inside lid of a box of breakfast cereal in your pantry looking just like an advertising link ...)

    • @seedsigner5695
      @seedsigner5695 3 роки тому

      Haven’t done a video covering it yet, but you can also add a BIP39 passphrase to the seed. The QR code will still transcribe the same, but it will be useless without the passphrase.

  • @seelvar
    @seelvar 3 роки тому

    While typing the words you said "I choose 24 words" (instead of 12) and then "Absence" (instead of Absent)? Do I hear it correctly?

    • @seedsigner5695
      @seedsigner5695 3 роки тому

      I might have misspoke, still new to doing these and getting over nerves, LoL. It’ll get better, I promise. : )

    • @goodmorningfiatnam
      @goodmorningfiatnam 2 роки тому

      The first 4 letters are all that matters in a seed word, so it wouldn’t make a difference if it’s absent or absence.

  • @sofuckingannoying
    @sofuckingannoying 3 роки тому

    That boot time is a bummer. A microcontroller might've been a better option, don't really need an OS for a simple, stateless device.

    • @seedsigner5695
      @seedsigner5695 3 роки тому

      It’s tentatively on the roadmap, but will take a white to get there. Meanwhile, SeedSigner is very useful right now. : )

    • @JojonJ19
      @JojonJ19 3 роки тому

      For cold storage operations, 1min boot time is really not a problem.