![Mitten Equipment](/img/default-banner.jpg)
- 51
- 287 269
Mitten Equipment
Приєднався 5 сер 2021
Відео
John Deere Mini Ex Radio Install Specifics
Переглядів 2,7 тис.Рік тому
In this video I will be showing why the fuse for the lights trips when you install an aftermarket radio. It all comes down to improper pin placement on the radio connector as well as the fact that the John Deere wiring harness feeds power into the radio through the yellow wire when the lights are turned on. By moving the green speaker wires to the other side of the plug they properly match the ...
Loader Mounted Landscape Rake? Heavy Hitch 60"
Переглядів 19 тис.Рік тому
www.mittenequipment.store/product-page/hh-landscape-rake-pre-order In this video we will be trying out the Heavy Hitch landscape rake on the front of this 2025R. What do you think about the test results? I found it works a lot better for raking leaves than having one on the back. Thanks for watching!
Assembly-Heavy Hitch Landscape Rake
Переглядів 2,1 тис.Рік тому
Order here: www.mittenequipment.store/product-page/hh-48-landscape-rake In this video I will be showing how I assemble Heavy Hitch landscape rakes. Thanks for watching! We are located in Rockford Michigan.
Kubota B01 Tractors
Переглядів 9 тис.Рік тому
mittenequipment.store In this video I will be offering my thoughts on Kubota B series tractors and why I believe they are the best sized machine for most homeowners. Thanks for watching!
Best Half Ton Equipment Trailer
Переглядів 8 тис.Рік тому
mittenequipment.store In this video I will be talking about my H and H speed loader trailer. I believe this is the best all around equipment trailer for your half ton truck. Thanks for watching!
Buying Used Finish Mowers
Переглядів 2,3 тис.Рік тому
Check out our new online store! www.mittenequipment.store In this video I will be speaking about my experience buying and fixing used finish mowers during the 2022 season. Hopefully we will have this Woods RM550 back in action for 2023! Thanks for watching!
2025R Backfill
Переглядів 912Рік тому
This tractor is currently for sale! (October 2022) www.mittenequipment.com/product-page/2018-john-deere-2025r In this video we will be using this 2025R and 260B backhoe to backfill a foundation wall. Thanks for watching!
HUGE 8' back blade!
Переглядів 457Рік тому
www.mittenequipment.com/product-page/8-woods-back-blade Check out this massive woods 8' back blade! Thanks for watching!
2012 Kubota BX1860
Переглядів 1,3 тис.Рік тому
www.mittenequipment.com/product-page/2012-kubota-bx1860 Check out this Kubota BX1860 in great shape! Thanks for watching!
2010 Kubota L2800
Переглядів 2,2 тис.Рік тому
www.mittenequipment.com/product-page/2010-kubota-l2800 In this video we will be showing our newly listed Kubota L2800 HST. Thanks for watching!
Kubota Pioneer Fitting Kit
Переглядів 2,8 тис.Рік тому
www.mittenequipment.com/product-page/bx-pioneer-fitting-kit In this video we will be installing the pioneer fitting kit that I have designed to replace Kubota's single point connector that is notorious for leaking. This new pioneer fitting kit is a direct swap for Kubota BX1880, BX23,80, BX2680, BX23S, B2301, B2401, and B2601 tractors that are fitted with the single point connector from the fac...
2018 John Deere 2025R
Переглядів 1,6 тис.2 роки тому
www.mittenequipment.com/product-page/2018-john-deere-2025r In this video we will be taking a quick look at this 2018 John Deere 2025R! This is a very uniquely sized tractor and our first two series John Deere compact! Thanks for watching!
2008 Kubota L3130
Переглядів 3,3 тис.2 роки тому
www.mittenequipment.com/product-page/2008-kubota-l3130 Take a look at our biggest tractor yet! This Kubota L3130 is a beast and it is in fantastic condition! Thanks for watching!
The Best Tractor Attachment! QUICK HITCH!
Переглядів 1,7 тис.2 роки тому
The Best Tractor Attachment! QUICK HITCH!
For Sale: 2020 Work Master 25 Tractor
Переглядів 1,3 тис.2 роки тому
For Sale: 2020 Work Master 25 Tractor
Land Leveling with Work Master Tractors
Переглядів 2,8 тис.2 роки тому
Land Leveling with Work Master Tractors
This BX23S is The Best Backhoe We've Seen
Переглядів 33 тис.2 роки тому
This BX23S is The Best Backhoe We've Seen
I had turf tires installed from the dealer on my LS 125s when I bought it. My grass thanks me for it. Best choice.
I ordered ag tires for my sub compact tractor, the R14s weren't available during the pandemic
It works pretty well. I use the 3pt adapter on the front on my 1023E with the landscape rake. I've done it in dozer mode and rake mode backing up. I do prefer the 3 points on contact vs. a 2in tube. You catch a root wrong and you'll torque up that 2in tube. I just about used my rake today to clear the lanes through the woods, but the bucket sufficed. What's really the cat's ass is putting a box blade on the front. You have to drive backwards, but you can really dial in your grading.
Do you know where I could buy a USED 54 inch John Deere plow with quick hitch in Colorado?
Good job. You saved me a ton of grief
Been using the versa turf for three years now and really not impressed with them. They dig into soft ground and tear up pathways much quicker than the other two types. Also have very weak sidewalls and don’t give traction without doing a lot of damage. Ok on a farm but landscapers stay away from them.
Kubota does not offer a hybrid from turf and r1 because the r14 is a hybrid of r4s and r1s thus the name r14
What a great idea! Thanks for putting this out here.
Been thinking of doing the same thing with my rake. Wanted to see about pushing the rake instead of dragging it. I’d have to have a different set up on my loader since the rakes a 3 point instead of 2” receiver
Titan attachments makes a 3pt adapter. It works great as a dozer driving backwards as a rake.
what's the name? where can i buy?
Great video I’m pretty stoked. I just got my 2016 bx2370 a month ago. We bought our acres last year midwinter and not having a tractor. Made snow removal, well you can imagine. Your video has shown me the capabilities of this robust little tractor. Thanks for the info.
He did a good job and nothing wrong with user a front laoder for a work bench.
Son, You may as well have a 2 foot hog because that's about all your cutting each time. Not sure if you are scared but run that thing You aren't going to hurt it. Quit being scared of hurting it and while I'm at it go forward not backward !!! I have ran a tractor with a 7 footer and if I only did as much as you inone pass it wouldtake me a year to cut the 100 + acres that I do.
Had a badly leaking bx23s. Bought this kit and it installed easily. Works and no leaks. An affordable and quality fix.
Thanks for the positive comments!
I absolutely need a cab tractor!!
Me too…
I have to agree to a point. As soon as the center is filled with grass/sod they spin. Yes it was in 4x4 , yes I had the diff lock pressed and even going down hill I managed to almost get stuck in my field. I tried finding an R1 tread the same size and like some sort of dark tractor magic, they don’t seem to exist.
Just placed an order. Thx for the video and kit. Very much appreciated
Thank you for your order! It’ll be in the mail tomorrow!
Ethan...your video rocks. Thank you for sharing all your knowledge of the unit. We are so glad to hear it meets your hauling needs in multiple ways. 🙌
How many pallets can you get on there
Hey man, thanks for the video. Any reason you couldn't put swivel D-rings in the deck? I'm using this to haul my Corvette to the track. Thanks!
You definitely could. I think I’ve seen some new on the lot with them already in the floor. I’ve also seen H H offers a front stone guard for hauling cars like you intend to.
I have 3 acres is this too big for 3 acres ?
i have an equal sized ford tractor for 2.5acres and it is perfect size. best thing to do is go to a dealer and try sitting/test driving
You need to learn to use jack stands, They might save your ASS one of these days.
I’ve got r4. It wasn’t really a choice with mY tractor or I would’ve probably went r14. But the r4 are fine I haven’t got stuck yet and I do like them for loader work which is primary function for my tractor and farm scenario. Big picture is there are lots of tractor tire choices and to choose what works best for your application.
How you doin Ethan? Thought I recognized you. The Frontier pusher I got from you works great- love the back drag in front of my garage door. I too have used a rear blade plowing snow on a gravel drive but if the ground is not frozen, you'll be plowing dirt. Peace.
I’m doing good! Glad you are enjoying the snow pusher! We got a decent amount of snow for about two weeks here….if that’s all we see this year I think I’ll be ok!
You are so dumb, there aren't enough words
Great job.
After scrolling through your videos I realized why you make the recommendation that you do. You feature mostly JD series 1 and 2 along with Kubota B and BX series. These are commonly known as subcompact tractors. When tractors get to JD series 3 through 5 or Kubota L through M and the front end loaders can actually lift a real load those extra ply ratings become very important for that load carrying that you dismiss out of hand. If you had much experience with compact through utility tractors you would be aware of a fifth tread design called R2 it is similar to R1 but deeper lugs for soupier slimmer mud like in a rice field. Which with 5 tread designs put the versaturf directly in the middle of all around performance a true "happy medium " which is fine for subcompact. But among 3 series and up, you can customize towards a particular purpose, and for my purposes an R4 industrial is the best compromise. I would even go so far as to say, as long as you limit yourself to selling subcompacts your recommendation is legitimate. But if you're thinking that applies to series 3 to 5 you will be doing your customers a disservice. Messick's, Good Works Tractors, and Tractor Time With Tim all have good videos explaining the tread design differences. There is also one by, (forgive me if I get the channel name wrong as I can't remember it as well as the others) NH Trailers and Tractor, in which he mentions the tread design in passing, but brings in ply ratings and soft vs Hard rubber compound. I'll just finish by relating tractor tires to road legal vehicle tires. You would be ill advised to put LT tires on a Camaro or a minivan, in the same fashion you would be equally ill advised to put a P metric passenger tire or a Z rated racing tire on a dually pickup. Buy the tire that best suits your purpose.
So cute
Bought one 2 years ago to replace the X730 we lost in a barn fire. My conclusion is,it is handy but under powered on the hydraulics and horse power and tippy as h3ll. A 3000 series would be a little more useful around the farm.
Me and my family was thinking about a John Deere 3025D
Great video I have a question for you kubota b7200 I’m looking to install a front quick hitch I have seen photos of ppl putting a bx2750 snowblower on them but can’t find any videos of them actually working… would you recommend a bx2751 or something else I’m new to the tractor world…???
You obviously haven't tested both tires. The R4 is superior. The R14 is a marketing gimmick.
Other than wood deck that will go bad (will need annual used motor oil/diesel application) and iffy robustness of film between steel/aluminum, this is one beefy, spare no aluminum trailer. Good stuff.
Orange tractor bad tires....... Humm
I currently have "the worst tires" I still will never get my machine stuck unless it is buried up to the frame. the other thing is you will most always have plenty of traction, at least as much traction as the HP can handle. The crap tires have also with the 4x4 have given me plenty of traction w/ a 33hp tractor to move large round bales and full hay wagons done steep hill in a pinch. these best worst tire videos are mostly a waste of time the difference is minor. the tractor size and HP make the biggest difference.
Thanks for the video, this looked to work well pushing a lighter load. I have an area that I want to clear that has stick, rock, roots etc , are the tines heay enough for that type of job. Plan to use with a Kubota L25
"I can't drive there, the leaves are wet" --- R4 Tires
Hahahahahaha
They are absolutely the worst tire. Completely useless
I prefer hdaps
Your wrong
Is this good for weeds?
I have a kubota 4060 with loader and backhoe I was wondering if you can upgrade to heavier axles just to beef it up
They offer a 14k version from the factory that should certainly do what you need.
Had a couple questions before I started the installation. Call Ethan, he answered promptly and gave me very detailed instructions. Installation was straightforward. I put two 1/2" washers between the plate and each of the fluid lines which kept everything tight. The process to connect and disconnect does take a bit longer, but no leaks so far. Lift the engine hood up to give yourself a little more room to work when attaching the hoses. Someone else on you tube suggested using Pex hose to keep the covers clean when the loader is on. Cut a piece about an inch and 1/2 and slide the cover over each end. Will see how it goes, so far all is good.
Thank you for the positive response! I hope everything continues to be leak free for you!
Is there a website that I can order from?
Nevermind I found it.
@@regermortis1 if you order tonight I will have it in the mail with the others tomorrow morning! www.mittenequipment.store/product-page/bx-pioneer-fitting-kit
I just now ordered. Thank you.
The reason I went with R4 tires is because of durability. My boss bought brand new Ag tires for his tractor the very first day the brand new Ag tires got a flat that I plugged, do you know what punctured the front Brand new Ag tire? A little stick lol I couldn't believe it. I have 435 hours on my JD 3025E I have the backhoe on with the BXpanded Root Ripper and a brushcrusher grapple I have been doing nothing but clearing trees, bushes, and stumps. Right now I am driving over a lot of stumps some of which are only a inch or smaller in diameter while carrying full trees, a backhoe and my fatass, Not 1 puncture has happened YET I say yet because it's only a matter of time but if I had any other tires I'm sure I'd be out of plugs by Now? Whenever you buy a tractor you should know what you are going to be using it for I knew I was going to be clearing a shit ton of trees, bushes, and stumps so I wanted tough tires although I also use my tractor for gardening 4x4 comes in handy
72 John Deere 6 acres
Nice, relaxing video. Love those finish mowers. Used to mow subdivisions with them. I did like the rear discharge better. Didn't sling rocks and debris back at me.
Thank you! I actually spent quite a bit of time mowing today. I have yet to get tired of it!
Excellent video comparison, your description has helped me a lot. I have both implements and an 800’ overgrown gravel driveway. My bad for it getting that way. It looks nice mowed but I’d like to revive it and likely add new gravel. It seems the way to go is to plane it first then rake it for the reasons you mention in your description. What do you think and thanks for your help!
Sounds like you’ve got it figured out! Plus you already have both tools!
I would’ve bought this kit if I didn’t already buy some connections from Summit. Do you think your aluminum plate would help and work with the summit fittings?
Yes, I use the fittings from summit in the kit. Send me an email and I can send you an invoice for the aluminum plate if you’d like. ethan@mittenequipment.com
You will run into problems at the points where steel meets aluminum. That creates corrosion that is visible with a white powdery surface rust.
H and H uses a clear film to properly separate the two materials
Ethan is Awesome ,I bought this kit from him and it Is wonderful, It totally fixed my problem (actually Kubota problem) He is a very outstanding up and coming business man,His attention to detail and customer service is second to none, If you are having trouble with your BX2380 loader coupler leaking This will fix your problem.
I was 100% positive someone would say something about using the loader as a workbench lol. But i came here to comment about cut quality with it on its highest setting. I rebuilt an old Farm Star (Worksaver) mower and it didn't cut the greatest at 4 inches where i like but 3 inches is amazing! It too is a rear discharge.