Відео

I had 2 pebble watch gold & standard black bazel. Black bazel has deep scract I think it was coating. Used 400 grit sandpaper first then followed by yours plus 2500 grit, scratch was gone. Wasn't like new shinny but better than visible scratches.

Will this work on a MX Master 3S? And what can i use for replacing thr sliding pads?

i will try, thanks!

I wish others used this format to do repairs and tear downs. Question if you have time to answer, do you think the MX Master original could use an MX 3 scroll wheel? Would that be possible to install? The MX Master used a rubberish wrap on the scroll wheel that deteriorates, the new all metal wheel is an improvement but I don't want to spend another $130 for a new mouse. Thanks!

Thumbs up for the cool video! Also lets me see that I can replace my battery easily when it stops working well.

Are the batteries soldered?

No se ven bien los colores de los cables de la opuesta al conector de carga,se me han arrancado de cuajo y los estoy intentando reparar

I just completed this mod yesterday, and it was my first-ever attempt in this realm. I have built and modified my PC on occasion, so I'm not entirely inexperienced. However, I must caution you: it is more difficult than it appears, especially for a beginner. I encountered several challenges; for instance, some connectors were lodged in my case, such as the top mouse cover and the battery plug, which was the first significant hurdle. The next, and probably the most daunting issue, was the removal of the OEM Omron switches, specifically the desoldering process. I couldn't properly remove the switches because I wasn't able to heat all three pins at the same time. I ended up damaging both switches before I was finally able to extract them. Soldering the new switches was much simpler. I used the Panasonic EVQP0E07K, which seems to be installed in the MX 3s. Unfortunately, the result wasn't up to my expectations, as it was still too clicky. This led me to desolder them and replace them with Kailh silent switches. Let me tell you, these nailed it, giving me a feeling nearly identical to the MX 3s that I own. After reassembling everything, I encountered a major surprise: my primary click wasn't working at all. Upon inspection, I discovered that I had damaged one of the conductive traces on the left-click PCB, likely while removing the OEM switches. I was able to bridge it with a spare wire I had lying around, and now it works perfectly again. The outcome is astonishing, but I must admit, it was quite a rollercoaster with moments when I feared I had irreparably damaged my MX 3 multiple times.

do you think I can do this as my first soldering task when focused?

is there a way to change Scroll wheel on the 2s for a 3s one is it possible?

Good for help movie😂❤

Hi I just did the upgrade by adding a second 8 gb RAM (it wasn’t the exact same one as the original but it is a Samsung with the same specs), did it just like you showed on the video, turn it on and nothing happens. the power button lights up, I can hear the fans going but the screen stays black. Any idea what it may be??

Hi, I ripped off my left earphone at the end of controller. Is it possible to repair it? Thank you.

Thanks!

Does the orientation matter when soldering the 2 switch pins?

the led flashes and changes colors to red, green and yellow, what could be and it doesn't turn on? english translation

What side it the battery on, and is the battery soldered or connected?

Thank you for this perfect tutorial, no 10 minute introduction and begging to subscribe, just straight to the point. Just modded my mouse and its incredibly quiet, finally feels great to use.

I took mine apart last night and messed something up, I think something fell out. The right click button works fine but the left click button now bottoms out and doesn't spring back up. It feels like it isn't making contact with anything. From visual inspection it doesn't appear to be damaged though. So I have no idea what is going on.

thanks for this video! I have a mx master 3, It start to give me a little problem to left button (single clicl,, sometime it doesn't works) so maybe soon I will change the switch. This video is very useful. One question: what kind of glue do you use to put again the black bands?

This polished benzel looks wayyy better than stock matte finished on the Time Steel. Good work!

Witch is the type of interruptors buttons left/right?

I just bought Minor II and could not turne them on. I've found out that they are fully discharged so I've charged them and used ok. On another they I can't turn them on again. Found out they are fully discharged. It seems the batterry is draining even then they are off. I'm gonna return them to the store, but not sure If I should get the replacement or all are that bad...

It is beautiful Tk U

Would you like to show us how replace head band(not with a zipper)?

do you know if this battery can work for the backbeat pro 2 ?? or if someone can tell me if it's possible to find it ! thanks

Nervous issues.? You have big problems people...anyway, good job! 😀👍

But there are still so many keys wrong. All the brackets and & @ etc. I couldn't get over that

Thank you ! That's a good solution, but wouldnt say its perfect e.g. the symbols above numbers need movement also. Isn't it better to re-label the keys without taking them out? I wonder if one can get some good solution for that

hola tengo una pavilion power igual, quiero colocar ram de 3200Mhz, capaz llevarla a 32gb 2x16, es compatible?

Really good job, before this work your corner was ligth gray/silver? I have the dark gray pebble steel and scary about remove paint

Which battery do you replace

“For God so loved the world, that He gave His only Son, so that everyone who believes in Him will not perish, but have eternal life. -John 3:16

Thanks for this. Time to swap out my degraded battery and this is just what I need.

Can confirm, this works. The clicks are not completely silent but its a lot better right now. But be warned. You need a very very delicate phillips screwdriver, a soldering iron with sufficient temperature (~450°C), a vise or something alike and something to remove the solder. Without this equipment you will fail.

Thank you so much! The loud clicks were driving me insane and was about to buy mx3s but saw this video before and it worked!!! Really good instructions!

Good day! Please, tell me. Can i replace the battery without soldering? For example just replace it? Can it works?

Sound Test @3:00

Awesome video and awesome content, thanks !

This video is...... snappy

I look for it because didn't know if pin distance same or not. Your video help me, thanks!

Please, No lengthy tutorial! I just want my phone keyboard back to qwerty mode, that's all! Thanks

I will definitely try this! Switched from Nexus Silent, which my ears loved, but my wrist hated, to MX Master 3 which my wrist loves but I'm getting really annoyed by the loud clicks. Maybe I can transfer the nexus buttons instead of just binning it

wow! Thanks for the video! Finally, I will be able to use my mouse without waking up the whole house! :D

Hello. it was excellent work. Which mute switch should I get for the LOGITECH ANYWHERE MX 2S? from aliexpress.

Hello. it was excellent work. Which mute switch should I get for the LOGITECH ANYWHERE MX 2S? from aliexpress.

Nice Trick! Saved me 20 bucks. Thank you sir!

Wow! I tried to find a "silent click" ergo mouse for the longest time before giving up and settling for the MX Master 2S... Watched this, then ended up snatching some silent switches out of a cheap Amazon mouse I had laying around and swapped those into my MX Master and I'm in love! The MX Master with Silent Switches is THE PERFECT MOUSE! Will be doing the same again whenever I finally upgrade my 2S! 😍 Cost: $0

Can I replace scroll of MX 3 for MX 2s, sir?