Considering the specs of course in cpu support I'm sure this cooler you chose won't be such a bad choice and is what I see most users use alot but my ocd won't just let me be and want to ask if there is a better rated tdp and be true to and or close enough in tdp than this cooler and will still fit inside my project , this pc motherboard inside an original xbox case while still having support for cutting the top emblem for a 80mm fan preferably a noctua redux although I like how wisper quiet 🤫 that fan is , I've bought about 4 or 5 or so with all exhibiting at some point another not long down the road quality control issues with noise in bearings , any all help will be great help and looking for close to or better in noise than noctuas flag ship fans even if I go with slim fans
The only downside of this barebone is that the X300 motherboard will not accept RAM that are higher clocked than 3200 MHz, i tried 4400MHz and it crashes a lot, i tried 4400MHz since APU really benefit from it
Hi there I am looking to get this for my new 5600g i Got today and i wanted to know the Side panel which has Cut outs i.e Squares for air flow What is the dimentions / measurement of this Length width ? as was looking to do a MOD to it to support a Large CPU cooler, thanks in advance !
@@chinoc6631 i can help answer this, yes it does support the Cezanne generation as i just installed my R7 5700g into X300 and it works just fine, just make sure to install the latest Bios
I just finished my Asrock X300 the other day. Thanks for sharing. Unlike you, I have been building rigs since the mid 90's. But since 2020, I have started to look to mini PC's (unthinkable to me just some years ago!).
Es diseñado para la serie 4000, para poder usar algún procesador de serie 5000 necesitarás actualizar la bios y contar con un procesador compatible para poder actualizarla
As far as I know you need Asrocks bios version 1.70 for AMDs 5500g series .... But I'm not 100 % sure about that. But , of course , no working processor no BIOS update. Just try to purchase a Asrock Mini Desk x300 case with the latest Bios version ( 1.70 ).
Check this out on @Newegg: ASRock DESKMINI X300W AMD X300 1 x HDMI Barebone System www.newegg.com/asrock-deskmini-x300w/p/N82E16856158068?Item=N82E16856158068&Source=socialshare&cm_mmc=snc-social-_-sr-_-56-158-068-_-03302021
Great video! I am about to build JUST the same PC! Have all the needed parts, except the DDR4 RAM. Find it difficult to find the right RAM. Can you be specific and tell me please which model of RAM exactly did you use? Other than this, we are using just the same components/parts! Was it needed to make any updates to the BIOS? How did you install Windows? I plan to download Win. 10 and buy a cheap licence key. I seems to be a GREAT little PC and I can hardly wait to work with it!
Crucial RAM 16GB Kit (2x8GB) DDR4 3200 MHz CL22 Laptop Memory This is the ram that i used, and i did not need to update the bios. I also downloaded windows 10 with a cheap key myself and it works great.
@@chinoc6631 Thanks, mate! Do you the specific model number of the Crucial RAM? Is it CT2K8G4SFS832? Can you please tell me on which web site did you buy the key? BTW, amazing to see how picked almost the same components)))
@@chinoc6631 ...there is ram that needs the bios updated? Can you link where it says that? Iv ordered a Chinese brand because iv nevr had a pc needing a bios update before it takes a ram stick 0_0. Also thanks for the build. Never built a mini PC before. Can I ask why graphite pad and not paste? I have arctic mx5 leftover and thought id use that.
You literally left the cable blocking the fan lol
Considering the specs of course in cpu support I'm sure this cooler you chose won't be such a bad choice and is what I see most users use alot but my ocd won't just let me be and want to ask if there is a better rated tdp and be true to and or close enough in tdp than this cooler and will still fit inside my project , this pc motherboard inside an original xbox case while still having support for cutting the top emblem for a 80mm fan preferably a noctua redux although I like how wisper quiet 🤫 that fan is , I've bought about 4 or 5 or so with all exhibiting at some point another not long down the road quality control issues with noise in bearings , any all help will be great help and looking for close to or better in noise than noctuas flag ship fans even if I go with slim fans
마더보드 바닥에 놓고 끄는거 엄청 거슬리네. 녹투아 방열판 바닥에 닿게 거치해 놓은거 엄청 거슬리네...
Goood 👍
The only downside of this barebone is that the X300 motherboard will not accept RAM that are higher clocked than 3200 MHz, i tried 4400MHz and it crashes a lot, i tried 4400MHz since APU really benefit from it
you need to overclock it. check the ETA prime channel
Hi there I am looking to get this for my new 5600g i Got today and i wanted to know the Side panel which has Cut outs i.e Squares for air flow What is the dimentions / measurement of this Length width ? as was looking to do a MOD to it to support a Large CPU cooler, thanks in advance !
Hello, Congrats on the 5600g, but as of right now, i am not sure that the 5600g is compatible with this desktop, but i could be wrong.
@@chinoc6631 i can help answer this, yes it does support the Cezanne generation as i just installed my R7 5700g into X300 and it works just fine, just make sure to install the latest Bios
@@wh7824 Nice, thanks for letting me know, that's good news.
I got no signal entering bios with hdmi which video output should i use?
Not sure about that
I just finished my Asrock X300 the other day. Thanks for sharing. Unlike you, I have been building rigs since the mid 90's. But since 2020, I have started to look to mini PC's (unthinkable to me just some years ago!).
Where to buy in India , Hyderabad
This x300 can support new ryzen apu?? 5000g series???
I am not sure if it can.
Es diseñado para la serie 4000, para poder usar algún procesador de serie 5000 necesitarás actualizar la bios y contar con un procesador compatible para poder actualizarla
@@VirtuaIDany No estoy seguro todavia.
yes, but you might need to do a bios update. www.asrock.com/nettop/AMD/DeskMini%20X300%20Series/index.asp#CPU
As far as I know you need Asrocks bios version 1.70 for AMDs 5500g series .... But I'm not 100 % sure about that. But , of course , no working processor no BIOS update. Just try to purchase a Asrock Mini Desk x300 case with the latest Bios version ( 1.70 ).
How did you attach the antenna wire to the wifi/bluetooth card so easily? It was a real pain trying to get that thing stick.
Not sure, but it just went smooth for me.
Did not get any GPU stability issue like some people with the H110 and X300?
Nope everything works perfect.
the USB cable looks like it was touching the fan blades.
It was, i edited it out of the video, but i moved the cable to a clip inside the case so it's not touching the fan anymore.
doesn't the ryzen stock cooler fit in that case?
I don't think the cooler that comes with the 3400g fits the case. I think the cooler that comes with the 3200g does. You need the stealth cooler.
@@chinoc6631 the stealth cooler fits if you take the top ring off the fan. the stealth comes with the 3200g.
Yeah i know, but i have the 3400g, it doesn't come with the stealth cooler.
@@paochino6973 i'll trade a 3200g for your 3400g? lol
It does removing the upper plastic cover
How much it’s new egg shipping cost
Free shipping from United States
I didn’t get on Amazon or neg way can you send me link
Check this out on @Newegg: ASRock DESKMINI X300W AMD X300 1 x HDMI Barebone System www.newegg.com/asrock-deskmini-x300w/p/N82E16856158068?Item=N82E16856158068&Source=socialshare&cm_mmc=snc-social-_-sr-_-56-158-068-_-03302021
Thank you
Thank you
Where we can buy the case
I bought it on Amazon, but you can also buy it on Newegg
Great video! I am about to build JUST the same PC! Have all the needed parts, except the DDR4 RAM. Find it difficult to find the right RAM. Can you be specific and tell me please which model of RAM exactly did you use? Other than this, we are using just the same components/parts! Was it needed to make any updates to the BIOS? How did you install Windows? I plan to download Win. 10 and buy a cheap licence key. I seems to be a GREAT little PC and I can hardly wait to work with it!
Crucial RAM 16GB Kit (2x8GB) DDR4 3200 MHz CL22 Laptop Memory This is the ram that i used, and i did not need to update the bios. I also downloaded windows 10 with a cheap key myself and it works great.
@@chinoc6631 Thanks, mate! Do you the specific model number of the Crucial RAM? Is it CT2K8G4SFS832? Can you please tell me on which web site did you buy the key? BTW, amazing to see how picked almost the same components)))
It is CT2K8G4SFRA32A, and i bought the key from ebay.
@@chinoc6631 thanks!
@@chinoc6631 ...there is ram that needs the bios updated? Can you link where it says that? Iv ordered a Chinese brand because iv nevr had a pc needing a bios update before it takes a ram stick 0_0. Also thanks for the build. Never built a mini PC before. Can I ask why graphite pad and not paste? I have arctic mx5 leftover and thought id use that.