Відео

And you might also add that there is a possibility that the plastic tabs may be brittle from age; and may break. The three fine thread screws hold the plastic assembly in position, but I will eventually be purchasing a new plastic housing assembly. Overall, dude, I'd give you an "A" on the classroom exam.

Ingenious fix!

Great video. Thank you for sharing this! It's helped me out tremendously!

Glad I watched ! This is my problem 👍

Great video. Thank you so much!

Killer tip about the core and warpidge 👍🏻

Nice. Did you know that a mailbox is supposed to be a specific height. I looked it up and it is supposed to be 41 to 45 from road surface and 6 to 8 inches from road / curb. Not sure if you mentioned that. Great detail on your post.

Thank you 👍🏼

Awesome video, nice and clear. Im about to do this on my customers TC45D....it's exactly the same, I'm curious tho, does the loader have to be removed first or do you think I can get around it? I have to hold the switch to run the tractor and have it parked where I wanted to work on it, I can get it off but would rather not if I don't have to. Thanks for your time

That’s beautiful work. But, Lord, wherever you live is gorgeous!

Thank you for giving ALL the details! Like the size of wood, type of screws, etc. It was hard to find that info on other DIY mailbox UA-cam videos. This one was the best by far for a beginner like myself! :)

This is a great video thanks!

Good, I like that.....RTR

Great video, thanks for sharing.

Good idea on the weed guard flashing idea.

Okay - what soundtrack is this?! Loving it! And the set-up!

Thank you for sharing your tips, and I learned something from your video about adding a surfactant. Which I will start doing with my Roundup Weed only Killer. Thank you again Sir.

gonna do that this weekend, great video, great instructions

Yeah, you can remove the painted door cover by pulling up on the tab then you don't have to worry about the tape or scratching the truck.

Great work , I like it . I'm gonna start mine now

Thank you for posting this!

It is amazing how long Ford let this simple problem remain without a redesign. I went a slightly different direction with my fix but conceptually the same. Great video.

PARABENS PELO SEU TRABALHO E PELO SEU CUIDADO. VAI ME SERVIR MUITO ESSE VIDEO.

I did find value in this tutorial, but was unable to contortion my arm around behind the panel to reach the release tabs on the fuel door assembly to release them. I gave it a good try for around 25 minutes, and after scratching my arm all up (yes I was wearing long sleeves) I gave up. I have the standard lift and standard sized tires on my 2011 F150 XLT. From a different youtube video I found I went with the 90º pick tool from the front. Using the pick tool and a nylon bicycle tire lever, I was able to loosen the tabs and move forward with the replacement process. I will keep the original and implement your technique with the drill and screw as a back up.

I don't think any surfactant actually got into your second test section because the liquid that was in the hose between the canister and the spray nossle was not exposed to any soap. That being said, dish soap is an ionic surfactant, which can interfere with the efficacy of the herbicide depending on the pKa of the product. Non ionic surfactant is made to address this problem. All in all, your sample size is too small to draw any meaningful conclusions, at least based on this test. That being said, out Republic is under seige, and we must root out anyone who does not support and defend the Constitution.

So u went about 2 feet into the ground?

Thank you

I just grab some product and will be using surfactant 2 great job

Great Job!

Ok if anyone owns a 2019 you can’t snap off the plastic gas cover. That’s ok cause the 2019 doesn’t have bolts to remove. You will have to push in all the clips holding the housing. And as they unsnap when your maneuvering the housing off you will also need to help the rubber seal around the gas opening off. I watched this guy - (google) 2015 - 2020 Ford F150 Loose Fuel Door Repair STEP-BY-STEP And it helped

FORD CAN GO SCREW !!!

my truck has a metal wheel well cover. did you remove yours?

Very good video mister .

Enjoyed watching your video for the mailbox post as this is a project that I have been wanting to do for a long time. Now that I am retired, I am planning on doing the same so thanks again for doing this video - just hope that I am a successful as you were - also just subscribed to your channel

Beautiful job! I give 2 thumbs up!!

Thanks! Great stuff here!

Does the water need to be turned off?

music sucks

Great video. Very detailed. You saved me the $350 quoted to fix it by the Ford garage.

Can the door cover can be remove by just pushing in the tab and sliding the cover off

I watched about 30 videos and this is one of the best. You used basic tools and made a high quality professional post! And you cover very many important points. Thanks for the video!

Thanks! Easy fix!

Thank you for helping me become a better farm hand!

It would help to know what year models this applies to…

Thanks for the informative video. I will give the additive a try

I had fender liners. I loosened one screw on the fender liner near the fuel neck line just so would not catch my arm. I found I could reach up and push the two bottom clips which aided me in being able to push the other top clip he mentioned. I used a stubby flat screw driver to aid me in pushing the top clip down as I was at the maximum my arm and fingers could reach. The stubby just gave me the extra little bit of pressure needed on that one clip. Everything worked exactly as he described and I’m definitely glad I found his video this is the right video to watch as he said in the beginning. I used more tape as I think I need more coverage than he did but that’s personal preference.

nice work. what a beautiful place you live in. cool

Thank you! I'm having this problem with my F-150

This was a tremendous help. I just fixed my fuel door. The only suggest is that can slide the decorative door off if you pry the tab on the inside up.

Thank you help a bunch