Відео

I'm not saying you are wrong but, this test is incomplete. You verified the capacity. However you didn't verified the 20A load for a period of time which is really important for an ebike or any electric vehicle. From just looking at it the AliExpress one is certainly not original just a copy. Although if it can discharge 10A for example for a period of time without getting too hot it most likely a good copy. But you didn't check. There are many copies now that have the capacity rated but they suck on high current loads. There is a problem if you need high current draw for periods of time. If you don't the copies are fine. The real issue is that it is dangerous because your ebike may catch fire if you using it to the max.

Peel and stick? We call it self-adhesive in England.

❤Thanks for the inspiration

How do you like the Panasonic NCR18650GA?

Da m ks u

so you are paying extra 1.5 dollar just for nothing china is just great it makes europ company incapable of competting

you should have shown breadboard connections and setup process more clearly. I have tried so much but this thing doesn't works. specially the IR system. also there is nothing mentioned about the IR sensor in the description

did anyone successfully made it ?

Good job.

Hi, when is the continuation? Regards, Cezar.

Is the complete video out yet?

flex seal works great

If i have high drain 18650 and written on it 30 a how to know if it is real 30 a?

Thank you for the review

Where can I buy that discharge heatsink fan device?

I have a battery tester that goes up to 20A 200w 30v

Ed, can you show us how to use the AA battery to power this

This is gold. 25$ including the tools?

Did you ever figure out what the "barn door lock" thing is called? I didnt find anything like it at home depot and i have no idea what to look up online

So essentially, if it’s from China, it’s fake.

What is an exiting feature? Will it exit your life when touching it?

Is the wiring diagram or the video correct? In the diagram the A4988 driver RST pin is connected to D2 & the DIR pin is connected to D1. In the video however it is D3 & D2. I soldered everything together and loaded the code onto the board, but testing the IR Hex codes doesn't work (nothing happens) and Alexa doesn't find it? Im not sure what the problem is...

The same sphere but this time cure the concrete with the light roof fibers of a rolls Royce on the outside 🤯

Came over from your reddit post. This is brilliant man!

You can also use a sponge to smooth the concrete

This is such a nice project, I love it. Mine would be painted mat black on the outside with the inner surfaces in metallic gold.

Gorgeous! Hit up jlcpcb for a sponsorship and get some custom boards for your next one!

Great idea! Make one for a doggie door and you will become a rich man!

If they are Chinese then the latest scam is to fill them with sand to make them fill heavy

Hi, may I know how do you supply power to the microcontroller?

Awesome video. The big question is: how does the stepper know where the shade is if the controller looses power and then gets it back?

Absolutely amazing! 👏👍😍

Nice job! I love it!

I am so thankful for you posting this. I can diy many things and am always looking for ideas. My wife wanted me to build her nightstands with a drawer, but I havent built a drawer yet.

Clean, simple and elegant. Thank you!

This is really nice! I like how you did something very modern while respecting the warmth and rusticity of wood. Great Job!

Happy new year missed you man

I think the concept is really cool and it's extremely eye-catching. I saw a comment below that mentioned adding a spiral motion like that of a screw. I second that recommendation I think that would add to the elegance. I personally love critique I think what you've made is awesome take this next suggestion as a suggestion 🙂. I found the inconsistency in the concrete sphere distracted me a little bit. I totally understand that pouring concrete is extremely difficult and I can't claim to be an expert. I think if you make a second edition if you can get the spheres to be more uniform, especially if you decide to implement the spiral motion, it will increase the allure. If getting perfect spheres is too difficult to acquire then I'd suggest sticking with the linear motion without spiral and leaning into the rough cutt features of the concrete by making it look like a stone 🪨 cracking in half.

King

Podrías darme el link del proveedor o vendedor de Aliexpress que te vendió las baterías 18650 originales?

Thank you, appreciate the links too :)

🤙 best time is after midnight!

Try using clear 100% silicone caulk. Same as for sealing around a sink in a kitchen or bathroom. Use a small paint brush and apply it in thin coats and let it fully cure. That will also make it easier to remove than epoxy.

Looking forward to the DIY! :)

smart idea! gonna steal some of that for my own doorway pullup bar build, thx for sharing

Where can I get these I have never seen

😢 ᎮᏒᎧᎷᎧᏕᎷ

Bang goes any Warranty. Very risky to drill holes in your frame. They are built that way for a reason.

I dont have these machine metal cutter. So frustrating

Hi. Great job. What do you call the rubber ring you put in the frame hole please? Do you have a link?