Відео

I feed them twice a week. Polyp Booster to the water column, reef roids direct feed, and phytoplankton to the water column. In addition, they get Kent Coral-Vite weekly to the water column.

@@saltypops4276 okay.. thank you

Hello. I have it saved in the files section of the FaceBook group AI Prime/Hydra Reef Group. It is called Salty Pops.

Peak reading is ~175 about 6” below the water right under the puck.

Hello. I have it saved in the files section of the FaceBook group AI Prime/Hydra Reef Group. It is called Salty Pops.

Hello. 2 AI Prime 16 HD can work on a 75 as long as you do coral placement properly. You are pushing them to max coverage, so keep in mind that the edges and center of your tank will be lower par than the areas directly under the light. So your light hungry coral should not be placed in the center of the tank.

They have 2 timers. One for blue and one for white. No moonlight. For hanging you would have to buying a hanging bar that mounts to the tank.

Hello. You can get the schedule a few ways: 1. You can message me on Facebook. 2. I have it saved in the files section of the FaceBook group AI Prime/Hydra Reef Group. It is called Salty Pops. 3. Send me your email address and I’ll email it to you. 4. Manually create in just 8 setting points.

I have IM 20g aquarium almost 24" long Is one AI prime light enough for it

Yes. You’ll be good with 1 16 HD

Hello. I change water every 2 weeks and the filter every 4, so technically the filter is cleaned 12 times a year

Thank you 😊 your videos helped me a lot .

Hello. You can get the schedule a few ways: 1. You can message me on Facebook. 2. I have it saved in the files section of the FaceBook group AI Prime/Hydra Reef Group. It is called Salty Pops. 3. Send me your email address and I’ll email it to you. 4. Manually create in just 8 setting points.

Hello. You can get the schedule a few ways: 1. You can message me on Facebook. 2. I have it saved in the files section of the FaceBook group AI Prime/Hydra Reef Group. It is called Salty Pops. 3. Send me your email address and I’ll email it to you. 4. Manually create in just 8 setting points.

Hello. I bought it at Menards. Any hardware store has it in the section where they have drop ceiling stuff. Cheap and you can get large sections.

@@saltypops4276 Thank you 👍🏻

Hello. It is 24” tall

@@saltypops4276 Thank you ! I’m running a fusion 20g about 12 inch deep should reduce the power ? I don’t have par meter

@@nanoman81really depends on what you want to have in it. But the easy answer is no, there is no need to reduce the settings. My Fluval Flex 15g runs a 16 HD with the exact same program and intensity.

@@nanoman81one more note. Just know with the light 11” above the water, a par meter submerged about 6” reads 175ish

@@saltypops4276 oh wow ok great info thank you so much I love the schedule! I’m renting a par meter next week

Hello. It is a green with pink tips bubble tip anemone. It is in a fluval flex 15 gallon and for lighting I have a single AI Prime 16 HD running my custom made Salty Pops light schedule.

Hello. You can get the schedule a few ways: 1. You can message me on Facebook. 2. I have it saved in the files section of the FaceBook group AI Prime/Hydra Reef Group. It is called Salty Pops. 3. Send me your email address and I’ll email it to you. 4. Manually create in just 8 setting points.

Hello. Corals are happy and healthy. However, growth rate is no where near the growth rate of other lights I have ran. So ultimately, my opinion is they are good lights at a great price, but if quick growth is what you want, these lights haven’t proved to do that in my tank.

Absolutely. Many people use this schedule on the 13.5 gallon tank

Hello. If you are using my program, once you download it, you can simply put 2 fingers on the screen and slide it left and right to the start time you want. If you are building from scratch, put the line on the time you want and click the +

Hello. You can get the schedule a few ways: 1. You can message me on Facebook. 2. I have it saved in the files section of the FaceBook group AI Prime/Hydra Reef Group. It is called Salty Pops. 3. Send me your email address and I’ll email it to you. 4. Manually create in just 8 setting points.

Hello. There are a couple ways to do it. One is to use the ramp time setting, I did not use that. I built the ramp times into the schedule. You may alter the schedule and you the ramp setting or just run as is without using that setting.

@saltypops4276 thanks very much for your reply and help, appreciate it..

Hello. Sounds like you have activated the moonlight feature.

@@saltypops4276 do you mean the lunar feature that was disabled. I appreciate the help

The tank dimensions will come into play a bit, but would recommend Fluval 207 or similar GPH. The 207 pump is rated at 206 GPH, with actual around 100-120 depending on your setup.

@@saltypops4276 thank U

​@@saltypops4276if i use fluval 207, should i add or remove some of the original filter media?

Hello. If you want to create a ramp. Simply put a time marker and all values at 0. Then an hour later put a time marker and put the value you want it to be. The program will create a slow ramp for you. If you want to use my program, you can get the schedule a few ways: 1. You can message me on Facebook. 2. I have it saved in the files section of the FaceBook group AI Prime/Hydra Reef Group. It is called Salty Pops. 3. Send me your email address and I’ll email it to you. 4. Manually create in just 8 setting points.

Hello. You can still go through the ugly phase without sand. Hair algae and etc will grow on your racks, rock, rubble, etc. not having sand will not prevent this unfortunately. You can have zoas and shrooms together with other corals as long as you understand that when you frag you should rinse / dip in tank water before going back in the system to remove some of the toxins and slime. Also, keep in mind quantity you are cutting. Don’t cut a large amount at 1 time, as 20 gallons is not a ton of water to disperse the slime into. I would also recommend running carbon after any cut to help absorb and released toxins. As for fish, I would recommend putting in a reef safe fish or 2. Damsel would work fine.

place in higher flow then it will move away and leave pups behind it. my rose ric yuma just produced its first pup after 9 months which is bright green and yellow

@@bensimpson4091 So If not trying to propagate then they like low flow? I have 2 godzillas and I want lots of babies lol What kind of par?

Hello. You can get the schedule a few ways: 1. You can message me on Facebook. 2. I have it saved in the files section of the FaceBook group AI Prime/Hydra Reef Group. It is called Salty Pops. 3. Send me your email address and I’ll email it to you. 4. Manually create in just 8 setting points.

Mine are in low flow at a light par ranging from 125 - 200

It really depends on which AI Blade you are planning on buying. Are you buying the Grow or the Glow. They both hit different spectrums. As for bulbs I prefer ATI. Depending on which blade you use I would mix Blue Plus and Actinic and Coral plus. Let me know which blade you are intending to buy and if you like a deep dark blue or a bright blue look to the tank during the blue period as well as bulb control, can you turn on 2 independently or just all 4 together and I’ll help you pick stuff out.

@@saltypops4276 It is the Giesmann 4 bulb 24" model Matrixx II light, I will get the AI Blade Blue, I prefer the bright blue. Thanks again