![Blu Ox](/img/default-banner.jpg)
- 59
- 132 494
Blu Ox
United States
Приєднався 7 жов 2020
Just having fun with our Blue 2020 Jeep Gladiator Rubicon. After I used the Gladiator to clear some trees from our property my girlfriend joked that I was like Paul Bunyan. I could not have done it without the Jeep and it's winch so I named the Jeep Bae the Blu Ox (I am sure that I am too old to use the "Bae" correctly but it was funny to me).
2020 Gladiator Rubicon, 3.5” Metalcloak Game Changer lift with 6-Pak shocks, 37X13.50 Cooper Discoverer STT Pro’s on MR105 Beadlock wheels, Badland APEX 12k Winch
See our build at revkit.com/blu-jt
2020 Gladiator Rubicon, 3.5” Metalcloak Game Changer lift with 6-Pak shocks, 37X13.50 Cooper Discoverer STT Pro’s on MR105 Beadlock wheels, Badland APEX 12k Winch
See our build at revkit.com/blu-jt
Third brake light option for the Expedition One Gladiator bumper on my 2020 Jeep Gladiator.
I had the Body Armor inside wheel third brake light but it failed inspection so I installed the Warrior Products third brake light as an addition to it and passed inspection.
Body Armor brake light: www.quadratec.com/p/body-armor/led-third-brake-light-wrangler-yj-tj-jk-jl
Warrior Products brake light: www.quadratec.com/products/12045_4190_14.htm
amzn.to/4bFMQAP
Waterproof terminal connectors: amzn.to/4bFMQAP
Wire Connectors kit: amzn.to/4bFMQAP
Crimping Tool: amzn.to/4bFMQAP
Body Armor brake light: www.quadratec.com/p/body-armor/led-third-brake-light-wrangler-yj-tj-jk-jl
Warrior Products brake light: www.quadratec.com/products/12045_4190_14.htm
amzn.to/4bFMQAP
Waterproof terminal connectors: amzn.to/4bFMQAP
Wire Connectors kit: amzn.to/4bFMQAP
Crimping Tool: amzn.to/4bFMQAP
Переглядів: 108
Відео
ZAutomotive Locker Sensor cable to solve Service Axle Locker System Warning.
Переглядів 792 місяці тому
I got the Service Axle Locker System Warning and decided to use the ZAutomotive cable to fix the problem. Z Automotive Locker Controller Harness: www.zautomotive.com/product/z_lkr_ctlr/
ICECO VL45 Fridge Long Term Update
Переглядів 2904 місяці тому
I got a chance to go camping in the snow with my VL45 refridgerator which I have used for a couple of years now and figured I would give you an update. * Please note that the Amazon links posted are associate links and purchases made through them will help support this channel. ICECO VL45 and/or cover: amzn.to/3QnkEdF
Camp Canopy in the Snow
Переглядів 674 місяці тому
Trying out a new heavy duty Canopy in the snow. * Please note that the Amazon links posted are associate links and purchases made through them will help support this channel. HD Canopy: amzn.to/3vGYrQb Sand Free Rug: amzn.to/3rqPvMV Gazelle T4 Tent: amzn.to/3Yrmj3J Tent Stakes: amzn.to/3xbjCul
Rebel Off Road XPLOR Rack Update
Переглядів 2495 місяців тому
I have been using this rack on my 202 Jeep Gladiator for over three years and wanted to talk about its long term functionality. rebeloffroad.com/jeep-gladiator-jt-xplor-bed-rack-2020/
Snow Camping 2024
Переглядів 2397 місяців тому
I finally get a chance to do some snow camping with my Gazelle T4 overland edition tent. I have a blast and get to try out some new gear. #jeepgladiator #gazellet4overland #snowcamping #notoverlandingjust camping * Please note that the Amazon links posted are associate links and purchases made through them will help support this channel. Gazelle T4 Tent: amzn.to/3Yrmj3J Sand Free Rug: amzn.to/3...
Review of the OnlyFire Collapsible Camping Grill
Переглядів 7467 місяців тому
I am out winter camping and decided to use my OnlyFire grill. amzn.to/3RVX9rN * Please note that the Amazon links posted are associate links and purchases made through them will help support this channel.
Camp Lighting Considerations
Переглядів 3210 місяців тому
Now that it is finally Fall I am camping more often and as the days grow shorter there is more and more need for camp lighting. In this video I discuss my use cases and different lighting options to provide possible data points for your your camp lighting needs. (paid links) Camping Fan: amzn.to/46On8qX Olight Flat Flashlight: amzn.to/3tvPl7R Fenix Tactical Flashlight: amzn.to/3ZXqOEx Micro LED...
Campfire Dutch Oven Lasagna
Переглядів 56310 місяців тому
I was challenged to make a Lasagna while camping and I accepted the challenge. It was a fantastic meal and a memorable camping trip. You can find the recipe here: www.freshoffthegrid.com/dutch-oven-campfire-lasagna/ Links to some of the items I used (paid links): Dutch Oven 8QT: amzn.to/3RVd5wh Dutch Oven 4QT: amzn.to/46uWOT8 Dutch Oven Lid Lifter: amzn.to/3FocefP Dutch Oven Tripod: amzn.to/46M...
Camp Chef Everest 2X Stove update
Переглядів 1,4 тис.10 місяців тому
I have been using this stove for 8 months now and wanted to provide an update on how well it has performed. (paid links) Camp Chef Everest 2X camp stove: amzn.to/3jSs9Mm Propane Tank and Carry Case: amzn.to/3ZLKDx2 Propane canisters: amzn.to/3UkBfPS Regulator and extension hose: amzn.to/43SMJxi Titanium Pt: amzn.to/3tb4ds White plastic camp table: amzn.to/3YvJpWU
Impressions after one year with the Gazelle T4 Overland Edition Tent
Переглядів 89011 місяців тому
I discuss my experience with this tent after one year and some of the pros, cons, and rumors. (paid links) Gazelle T4 Tent: amzn.to/3Yrmj3J Sand Free Rug: amzn.to/3rqPvMV Down Camping Blanket: amzn.to/3PsuXvx Rechargeable fan with led: amzn.to/3ZrdNTG Roller Cam: www.rollercam.com/ Tent Mount: americanadventurelab.com/product/sleeper-keeper-large-tent-mount/ Cot: amzn.to/3E5DD6h Sleeping Pad: a...
Metalcloak Rear Sway Bar Brackets Installation for a 2020 Jeep Gladiator
Переглядів 1,8 тис.Рік тому
The Jeep Gladiator sway bar links are very easy to damage offroad and the stock frame mount brackets will not last long. I show the damage to the bracket and the very easy install process to add the very excellent Metalcloak brackets. metalcloak.com/jt-gladiator-rear-sway-bar-reinforcement-bracket.html
NOVA Jeepers at Uwharrie National Forest for Memorial Day Weekend 2023
Переглядів 6 тис.Рік тому
A group of NOVA Jeepers ran Uwharrie's Daniel (Jeep Badge of Honor Trail), Dickey Bell, Dutch John and a number of other trails over the Memorial Day Weekend. We have a Jeep CJ7, JKU, JK, and a gas and diesel Gladiator on the trip. Fantastic weekend of Off-roading and camping!
Considerations for choosing a Camp Knife
Переглядів 45Рік тому
I always carry a knife with me and I have some specific rational for what I carry in camp. In this video I talk about some of the things I consider when choosing a camp knife. Description of Knives shown: Buck Hoodlum 5160 Steel $220 (discontinued) Kabar full size Bowie 1095 steel $90 amzn.to/3nbOoP2 Hinderer Ranch Bowie 3V steel $350 www.bladehq.com/item Hinderer-Knives-The-Ranch-Bowie 93613 (...
Monitoring Temperature while camping with SensorPush
Переглядів 64Рік тому
I do some winter camping and monitor the temperature with my SensorPush devices. (paid links) Sensor Push: amzn.to/3E5TzoV Gazelle T4 Tent: amzn.to/3Yrmj3J Cot: amzn.to/3E5DD6h Sleeping Pad: amzn.to/3jXCCGr MSR Footprint: amzn.to/3Xmd7wc
Initial impressions of the Luci Light and Luci light Pro
Переглядів 41Рік тому
Initial impressions of the Luci Light and Luci light Pro
First Impressions of the Camp Chef Everest 2X Camp Stove
Переглядів 5 тис.Рік тому
First Impressions of the Camp Chef Everest 2X Camp Stove
Camp Kitchen setup with Front Runner Flat Pack Storage Boxes
Переглядів 863Рік тому
Camp Kitchen setup with Front Runner Flat Pack Storage Boxes
Using Natural Tinder for Fire Starting in Camp
Переглядів 86Рік тому
Using Natural Tinder for Fire Starting in Camp
A Quick Comparison of my two Camp Tables
Переглядів 78Рік тому
A Quick Comparison of my two Camp Tables
Electric Chainsaw for Off-road? My impressions of the Greenworks Pro
Переглядів 283Рік тому
Electric Chainsaw for Off-road? My impressions of the Greenworks Pro
Gazelle T4 Overland Edition Tent First Impressions
Переглядів 8 тис.Рік тому
Gazelle T4 Overland Edition Tent First Impressions
Girlfriend fires S&W .500 MAG for first time
Переглядів 432Рік тому
Girlfriend fires S&W .500 MAG for first time
What tires were your running?
They are Cooper Discoverer STT Pro 37X13.50 on 17 inch wheels. They are my second set and have worked really well for me. Thanks for watching!
Thank you for putting together this video. I have 5 of the Flat Pack Storage Boxes that I carry in my Jeep. I'm still trying to get organized. I want to see if you've thought about using the STORAGE BOX FOAM DIVIDERS? I know the dividers are slightly taller than the Flat Box.
Organization is always a goal for me and I don't think I will ever be completely satisfied. I do not use the dividers because most of the stuff in my storage boxes is large enough to make them unusable. If I was storing a lot of smaller things they would probably help find stuff a lot easier. Good luck on your organizing efforts and thanks for watching!
Im trying to get the top nut off but its just spins. I noticed you used a box wrench in the back . However doesnt have a nut behind it? It just spins
The stock hardware is a completely round nut that is attached to the bracket. Once the nut breaks free of the bracket it will just spin. When I originally replaced the nut I used a lock nut plier on it and then replaced it with a standard nut. Good luck and thanks for watching!
I just got my Gazelle tent, I like the tight mesh to keep the skeeters out, air flow seems fine. Gonna wait till fall to go camping its a little too hot right now in Las Vegas. Thanks for the fan info, ordering one now. Great video.
I am not big on summer camping myself, fall thru spring is my thing. Thanks for watching!
Canadian Military 101 "snow on the floor " lol we were never allowed to stay on cot if it was freezing. I was always told it was because of air around the cot
I always thought the same thing but with this well insulated sleeping pad it is very comfortable. Keep in mind that I have not had a chance to use this system in temps lower than 14 degrees but I will post an update if I do. Thanks for watching!
@bluox i just bought the t4. I was thinking of buying some disco beds. Do you think they will fit well?
@@TheHenryway What size of disco bed are you looking at, I see a number of different ones. My Timberridge is 74.41 x 25.59 and that is as big as I would want to go. Enjoy your T4, I love mine, and thanks for watching!
You can use some old towels and cut them to size. Thats the trick to a quiet stove.
I actually got some foam sheets from an Amazon package that work really well. Thanks for watching!
First let me say , there is NO WAY !! I'd live with or be ok with the tire denting my brand new JT !!! I'd absolutely be contacting the company and demanding it repaired since the product malfunctioned ans caused the damage... but to each there on I guess lol. Second I appreciate the video/ insight of the tire carrier !!! Thirdly I'd really like to know about some other product choices you've gone with such as the rock rails/step & I noticed the blue tailgate addition , something you've made or purchased ? And from who ? Thanks !!! She looks good !!!! I'm gonna check out your other videos!!
Thanks for watching! Some of my other videos cover a lot of those other items but the tailgate cover is from mountainhatch.org/ and I love it. There are a lot of other options now a days but this is a really good one. The rock rails are the Rock Slide Engineering with the extra skid plates and I love those two. I have banged them up pretty good and they continue to work very well. Hit me up if you need any additional info.
Blu Ox, I've had my Swing-Out bumper for about 1.5 years now. I want to disassemble the swing-out carrier/arm and regrease the bearings. Have you done this yet? If so, how in the heck do you get it off.
I have not done that, mine is working fine and I just don't feel like messing with it. I thought about it and I have a big channel lock plier that fits and I think I would try wrapping the cap in duct tape and then use the pliers on it. Let me know how it goes for you as I am curios. Thanks for watching!
@@bluox I think that was my issue. I could unscrew the cap with my hands. It's not my daily driver and stays in the garage most months. Last fall I performed ALOT of leaf removal (over 1000 lbs easy). I think the dirt from packing/transporting/dumping the leaves at a local dump left alot of room for tiny particles to make their way down the arm. The arm began to bind. Anywho, I took it to a shop this morning and they said it just looks like the bearings need to be regreased so they used a marine grease spray and then a crimson valvoline grease. They said, if after a couple weeks there isn't any improvement then they would remove the arm for me so I can give it a deep clean.
@@YellowToucan Hope that works, thank you for sharing. This might help someone else in the same situation.
Best tail lights out there period in my personal opinion. How Jeep should have made them in the 1 place.
I agree. I hear about folks in the forums talking about reliability issues but I was on the original wait list for these and have been running them hard off-road with no issues. Thanks for watching!
Good video, thanks! Hey, did you get your tent holders from American Adventure Lab. Do you think they would fit in the T-Slots of a Rhino Pioneer platform rack? Again, thanks for sharing the info on your T4.
I use a magnet to keep the wind screens from rattlings. Just get a magnet large enough where both screens will attach to magnet. The magnet will stick to the cover and you just leave it in place on the lid while using stove, won't get lost.
What is the Tunnel cover are you using?
Is that supposed to be "Babe", Paul Bunyan's ox ?
Yes, but our kids always say "BAE" instead and it seemed like a good dad joke. We were off-roading and had a tree down across the path and I used my chainsaw to remove it. They said I looked like Paul Bunyan and since the Gladiator is blue, it is now called the blue ox. Thanks for watching!
I use two Amazon envelopes to take care of the rattle. They're plastic coated with a thin layer of bubble wrap inside. They work great! Slip one over each "wing" and fold it shut. We get them all the time, so when they get dirty, I just replace them.
What size tire are you running? Nice clean great video!
Why not just use a smaller drill bit and drill through the gromet rather than cut it?
Well done - even with a bum arm! One of the best install videos I have seen - ever. Appreciate the detail and not just skim over it. Also - thanks for not totally ruining your tutorial by playing horrible, discordant, loud, music over your dialog. Come on KC - only have five different tools just to install a simple bracket and adjust the light. Did you consider adding a sixth tool to remove the bezel? Why use one tool when two would also work?
Ty for the video and I hope you feel better
I appreciate that and thanks for watching!
The CJ and 2dr JK did pretty well on the.middle path of Dickie Bell, these are the least lifted vehicles I’ve ever seen go up that line.
How much lift and what size tires do you have on your JT.?
I am running a 3.5" lift with 37" tires. Thanks for watching!
you still running this rear bumper ? still like it ?
I am and I do. Nothing is perfect but bumper works really well for me. Check out my update video on it: ua-cam.com/video/wiUfJay436w/v-deo.html Thanks for watching!
I BROUGHT THIS TO ATTENTION AN JLFORUMS AND THEY ALL TOLD ME I WAS FULL OF SH¡T. I COMPLAINED TO ORACLE, THEY TOLD ME I FULL OF SH¡T. ORACLE IS CRAP AND EXSPENSIVE CRAP AT THAT. AND YOU "JEEP" CLOWNS DO WORKAROUNDS AND THEN PROBLEMS NEVER GET RESOLVED. CRAP AND BULL SH¡T!
Good video man keep up the good work
Thank you and thanks for watching!
Yeah, for $53.00, I'll pass. That's ridiculous for a stamped sheet metal grill that will probably end up warping and getting bent and not go together properly or won't stay together once some heat is applied. I'll stick with my box stove with a grill grate set on top. You have fun with that tho. If you like it, more power to you.
We will see how it holds up over time but so far it works OK. What box stove are you using? Thanks for watching!
That’s not stamped. It’s either CNC plasma or router cut.
Can you add a link to the hose adapter ….. exactly what I’m looking for . Thanks
Looking for something like this but without the a rear bumper winch as well.
I assume that you meant "with" a rear bumper winch, as this bumper does not have one. I have not seen too many rear bumpers with a winch mount capability and none with a dual swing but good luck with your search. Thanks for watching!
@@bluox yes, I meant with. I thought you forgot me. lol
How did your trip to Moab go? Did the 37" spare on the swing out hang up on anything? How are the latches holding up?
I have a gazelle T4 that I fit inside my Jeep TJ. I put it in diagonal or I can strap it to a rack above my spare tire. I absolutely love it. The only draw back is it is heavy and a little cumbersome to fold up and put in the bag.
Thanks for this. Gonna try to knock it out tonight. I also but some vehicle door trim that I'm going to place around the edge to close it completely.
Let me know how the trim piece works for you. Thanks for watching!
Why not measure the posts then use a sharp drill carefully poking the cup ?
I can't remember if I saw you that weekend, but I was out with a group that same weekend, I was in the red early bronco (1970), also camped at Arrowhead. We also did dickey bell in the rain, it was interesting but got everyone up and back down it and back side of daniel. Always a good time at uwharrie!
I remember seeing your rig at the campground but I do not think we came across your group on the trail. We really enjoyed our first trip to Uwharrie and will definitely do it again! Thanks for watching!
As others have ponted out, there is a strap that you put on before you put the t4 in the bag that makes it easy to handle
I found a strap that works but, to be honest, I have gotten so good at dealing with it that I don't use the strap at all. Thanks for watching!
Finally Ordered mine! Appreciate the review videos! Hoping to do an install video. Have you considered adding a third bake light or one of those LED brake lights like the JL? I’m concerned about someone possibly rear-ending me. Was also contemplating a rear light bar for brake and turn signals under my tent…thoughts?
Congrats on your purchase, I think you will like it. I wanted to do an install video but I installed it by myself at home and it was just too much, comment here when you have yours up and I will check it out. Check out my rear visibility video ua-cam.com/video/FS3Jl8Odlj8/v-deo.html I did a third brake light in the wheel and also did a video rear view mirror to help me see and be seen. I have considered putting a stop and blinker light on the top of the rack but have not pulled the trigger yet. Thanks for watching!
@@bluox will do!
I know what I am gonna try on my next trip!
Loved your video. Definitely helped me in my stove decision. Thank you!
a iwantani stove does literally the same thing, its super compact and its just one unit itself without having lug around a bulky gas canister.u can literally fit it into a small 20l backpack.. and is available in almost every supermarket for $40....the $60 version outputs about 15,000 btus....
Really apples to oranges, but if it works for you that is fantastic. I have two of those butane stoves and they have their place but I rarely use them. I have specific backpacking stoves that are lighter weight and just as effective but for car camping those things are not as important. The temperature control and wind shield are very important features and the propane works much better for cold temperatures, which is my normal use case. Thanks for watching!
Glad you found a stove that works for you!
It shows
Are you Canadian?
Nice vid. I put a Voodoo rack on my Gladiator. Have you noticed stability issues while you're loaded (on top of the rack) both on/off road? I felt like I was a little wobbly at interstate speeds....It was weird. Looking forward to your thoughts.
I have not had that problem either loaded or unloaded, when I camp I usually have a full bed of gear and a good bit of it strapped to the top of the rack. Are you running the steel or aluminum rack? Roof top tent? What shocks and springs? Thanks for watching!
I'm running a steel rack. No tent (yet) just gear. Factory Fox shocks and springs on a 2020 gladiator Rubi.
I had upgraded springs and shocks on my rig before I added the rack (also steel) so that could be the difference maker.
@20:50 wheres the corrds to this spot? or at least a trail number? please.
How tall are you?
You are off on the BTUs. This stoves output is 20k BTU per burner, on max.
Do you have to remove the wheel?
It might be a little tight, but you would not have to remove the wheel. Thanks for watching!
Which step slider do you have
Where did you get the hose and regulator to replace the hard pipe. I just got this stove but with the 5lb growler tank after watching your great video, but want to nix the hard pipe regulator 6:37
Glad you enjoyed the video, I think you will really like that setup! The exact regulator and hose that I purchased is no longer available but this one: amzn.to/43SMJxi is the same basic setup. Please come back and comment on how it works for you as I always enjoy getting other folks feedback. Thanks for watching!
Couldn't you just shorten the post on the lights instead?
Thanks for the video👍 this helps me a lot, I’ve been staring at the wiring harness for days, and could not figure out if I’m supposed to wire that to red positive individually to each switch but it looks like you connect both red positive together on the KC harness and then wire those two on to One switch OEM wire? Then the white wire I’m assuming is a positive wire which gets connected individually? Is there a reason both red wires get connected together, is that how KC designed it? Or did they design it so the red wires were individual so the upper and lower lights are separate? If that makes any sense but I will copy what you did this helps a lot thank you!!!!
So 2 reds to aux switch, 1 white to low power aux switch then black to ground and that’s it right?
Hi can u let me know the lowest point mounted on bumper carrier how many inches does jack go over roof? I wanna make sure I can get into my garage with this set up. Thanks
The bottom of my jack tray is currently sitting at 39 inches off the ground but it could be lowered another 2 inches. At 39 inches with my 48 inch high lift the top of the jack is at 87 inches. Thanks for watching!
I should have added that those heights are with a 3.5" lift and 37" tires.
@@bluox is it even with roof or goes over roof? Or below roof. I'm getting this bumper tire set up. But Not sure if jack is to high to get in my garage. I got a 2 inch Terra flex level kit and 35s
My roof is at 80 inches with my lift and tires and the jack extends 7" beyond that. If I put the mounting plate all the way down the jack would be at 85". With your lift and tires your roof would be about 76 inches and the jack would be at 81" when mounted at the lowest point.
@@bluox so jack is going about 4 inches above roof? I don't think I'm gonna be able to get in my garage with jack. I'm surprised there isn't a smaller jack I can mount to this
How would you rate the trails compared to Union Springs to Flagpole? I assume Daniel is harder, but Dickey and the others?
@@td7122 That makes perfect sense. Did you stop by the Outpost and pick up one of the free paper maps? It makes it a little easier to plan a route.
Thanks for the video...what rear bumper are you using?