![FamilyMan Racing](/img/default-banner.jpg)
- 201
- 283 303
FamilyMan Racing
United States
Приєднався 6 жов 2011
Engine Swaps, Fabrication and Racing, Oh My! Follow along with my family as we plan, build and tune an LS swapped 3000GT and race it. Will be built for drag racing, specifically no prep, also some autocross and even roadcourse. Most importantly....burnouts!!
After the 3000GT is complete, another engine swaps (not LS) and turbo builds are in the line up. If you like turbo noises, fabrication and burnouts, please share and subscribe. Come with us for the ride as we learn together.
After the 3000GT is complete, another engine swaps (not LS) and turbo builds are in the line up. If you like turbo noises, fabrication and burnouts, please share and subscribe. Come with us for the ride as we learn together.
Відео
Meep meep 3000GT drag n drive horn and fans wired
Переглядів 11919 годин тому
Meep meep 3000GT drag n drive horn and fans wired
Modifying 25.5 cage for longitudinal awd THOR 3000GT
Переглядів 3922 місяці тому
Modifying and cutting up a finished 25.5 chassis cage to fit awd longitudinal setup in 3000gt with powerglide and 6g75
Ford 4x4 into THOR the 3000GT Drag Car
Переглядів 5693 місяці тому
Fabrication work to mount a ford front differential into a 3000GT and some rolling antilag in 4g63 engine swapped MR2
Tube Front End fabrication - 4wd AWD 3000GT Drag Car
Переглядів 6563 місяці тому
Cutting the front end off a 3000GT and fabricating a tube front end. We go over the weight savings and pitfalls.
Chopped the top off my 3000GTs
Переглядів 4804 місяці тому
We chop the top off two cars to try to combine into one
Cars and Coffee and WCF World Cup Finals
Переглядів 3478 місяців тому
Road trip 4g63 engine swapped Toyota MR2 to MIR to watch WCF World Cup Finals, Import vs Domestic. Two stops on this beautiful drive for some local coffee and review.
Hard Tire No Prep 4g63 Auto Swap MR2
Переглядів 1,4 тис.9 місяців тому
No prep racing with in car Dragy video! 4g63 Auto swapped sw20 Toyota MR2.
4g63 Toyota MR2 makes it to the FINALS at Arm Drop No Prep !
Переглядів 83111 місяців тому
4g63 swapped 1991 sw20 Toyota mr2 goes hard tire racing at the Arm Drop Revival in KY! We run into @JimmyDaleRacing randomly at McDonald’s and also at the race. Mr2 goes to the finals in Daily Driver class! And Semi-finals in Hard Tire!
4g63 swapped Toyota MR2 chases down turbo foxbody
Переглядів 1,3 тис.Рік тому
4g63 swapped Toyota MR2 chases down turbo foxbody
4g63 Toyota MR2 full build in 1 min !
Переглядів 1,1 тис.Рік тому
4g63 Toyota MR2 full build in 1 min !
Trans carnage 4g63 auto MR2 and update on 3000GT promod
Переглядів 840Рік тому
Trans carnage 4g63 auto MR2 and update on 3000GT promod
RWD 3000GT Promod ! What engine should we use?
Переглядів 859Рік тому
RWD 3000GT Promod ! What engine should we use?
1991 Toyota MR2 SW20, 4g63 engine swap and auto trans, road trip and drag racing in Florida
Переглядів 1,7 тис.Рік тому
1991 Toyota MR2 SW20, 4g63 engine swap and auto trans, road trip and drag racing in Florida
Sick Week Day 3 in 4g63 MR2; what broke?
Переглядів 551Рік тому
Sick Week Day 3 in 4g63 MR2; what broke?
Sick Week Day 2, we strap a GIANT cooler to 4g63 swapped MR2 and blast down the interstate!
Переглядів 660Рік тому
Sick Week Day 2, we strap a GIANT cooler to 4g63 swapped MR2 and blast down the interstate!
Sick Week Day 0: Tech and Testing, 4g63 MR2
Переглядів 446Рік тому
Sick Week Day 0: Tech and Testing, 4g63 MR2
Sick Week final PUSH! 4g63 swapped Toyota MR2
Переглядів 999Рік тому
Sick Week final PUSH! 4g63 swapped Toyota MR2
4g63 MR2 building custom axles - Sick Week build update
Переглядів 426Рік тому
4g63 MR2 building custom axles - Sick Week build update
SICK WEEK PREP ! Fueltech FT550 wiring in 4G63 Swapped SW20 MR2 turbo
Переглядів 888Рік тому
SICK WEEK PREP ! Fueltech FT550 wiring in 4G63 Swapped SW20 MR2 turbo
4g63 swap SW20 MR2 build project Episode 2
Переглядів 955Рік тому
4g63 swap SW20 MR2 build project Episode 2
Wrecked LS 4WD 3000GT and new project car
Переглядів 3,6 тис.Рік тому
Wrecked LS 4WD 3000GT and new project car
Called OUT ! No Prep testing and racing on Methanol ! 3000GT swap twin FP 7875 turbos
Переглядів 2,4 тис.2 роки тому
Called OUT ! No Prep testing and racing on Methanol ! 3000GT swap twin FP 7875 turbos
How To DIY 16v alternator - Turn your alternator UP with potentiometer for only $2 !
Переглядів 8 тис.2 роки тому
How To DIY 16v alternator - Turn your alternator UP with potentiometer for only $2 !
REACTION video plus Three 3000GT Road Trip ! 3000GT engine swaps
Переглядів 5542 роки тому
REACTION video plus Three 3000GT Road Trip ! 3000GT engine swaps
Who is doing the engine work?
Don at KakPerformance. He does all of my engines. LS, 4g63, 6g7x
Thank you...will look him up!
My favorite part is the E stop thing
Yeah it’s pretty nice to shut off the whole battery
Awesome build, can't wait to see this thing running
Thanks bud!
Needs more foglights! For real though, she is coming together nicely. I am pumped to see what this 6G75 can do in the right hands!
❤
Thanks for the update mate. I'm sure you've been asked this, but what are your hopes for this car? Times, power level etc.....
Hey Scotty! Goal is to go as fast as the stock crank allows. I believe mid 7’s are possible. But we shall see. Some classes the car has to weigh 3000lbs though too.
@@4familyman nice. 💪🏼💪🏼
When do we floor it
As soon as possible 😢
Awesome bro. Back at it with the gt. And it’s white like mine. Excited to see what’s next.
Next is motor, wheels, tires and go fast!
Been following you since the 3si days, 4g63 transplant days, LS turbo v8 days, and now the 6g75/74 build (almost forgot the MR2). You've always thought outside the box. I have enjoyed watching your skills grow! Can't wait to see this project to fruition.
Thanks bud!
Lots of progress! Lets goo!!
Getting there!! Finally feels like a car again. Not scrap metal
one of the rare times youtube suggested something good! Following, looking forward to watching the build
Awesome thanks!
I see Eric, I click. Been looking for an update.
Awwww ☺️
What ECU are you going to run?
Fueltech FT550
No room for an engine?
Hopefully some room for it lol
@@4familyman You'll be needing a GTR type front diff built into the sump. Otherwise, it'll be as high as a Pajero but worse.
I’ve done dozens and dozens of hours of measuring. Engine will be high, but it will fit. And have good driveline position to rear differential. I’m building a custom oil pan too
Woooooooo. Love seeing the progress as always. Coming along very quickly.
🥰
Coming along sweet man!
Thanks!
@@4familyman I really like the battery cut offs. What brand are they?
Amazon specials lol. The battery relay/isolator is NVX BIR200. The Estops, come in a variety of sizes. Just search, emergency stop push button 12v
@@4familyman sweet. Will do. Thank you.
What PDM are you using ?
shadetree builder. We don’t got no PDMs around here lol. It’s a racewire, basic chassis harness, Amazon switch panel to an Amazon relay/fuse board. And a battery isolator used as a battery cutoff with two Estops. (One on dash and one on rear of car).
@@4familyman nice, whats the timeline on the build?
@@nicholasprusko9590plan to be testing and racing this fall. Still waiting on some stuff. Posting a longer video soon with updates
@@4familyman well I guess you will beat me. I blame you for not wanting to ship that 6g75 crank :).
@@nicholasprusko9590 😂. Maybe I can be persuaded :)
Always love the videos youtube doesnt give me the notifications but ive been watching for 2 years now love the garge build love the family just overall love the videos keep.it.up
@@davidfolkes8849 I really appreciate that!
What ecu and tuning software you’re using?
That was AEM series 1
but have run aem series 2, ms3pro and fueltech ft550 on various setups
Will this kill or overwork my alternator.
@@petertowers9579 likely shave some life off. No idea.
Did you make those?
I bought the doors with some other parts and then made them work.
Subscribe
I have 3 diodes in line and a dial I get 15.2 I think I’ll put one one more inline my dial is 10k
On my 2007 Toyota Tacoma, I use a diode (in a mini-fuse configuration) in the sensing circuit to raise the alternator voltage from 13.7 (factory output) to 14.4 volts.
Do you use the stock rear end for the LS swap?
For awhile but broke CV axles and eventually a hub. So swapped in a solid axle ford 9”
Whats the lip and splitter kit i have a 95 GTO i need this👏👏👏
It’s for a Mustang
How did you retain the AWD with that LS1?
You are literally commenting on one of the videos in the build series of showing you exactly how I did it lol. I didn’t “retain” AWD. I made my own AWD system
@@4familyman O' OK. Thanks
@@4familymanSo I own a 1996 FWD, as you can see in my avatar. I also own a 1996 Audi A4 quattro that the mechanic I paid to fix the oil leak on failed to fix, so bad engine now. However, and I haven't measured or anything, but I believe I could put my Quattro on my 3000 GT, and my engine would be sitting right and not sideways anymore. What do you think? I saw where I can change the power so it's 60 to the rear and 40 to the front, so I could run wider tires on the back then and have a rear wheel bias.
@@jasonbourne1596 just fix the Audi. Or enjoy the 3000 as is. You would need thousands of dollars and hundreds and hundreds of hours of fabrication. And you’ll end up with a car that’s worse than what you started with.
@@4familyman Is that what you did? Ended up with a car worse than you started with? How is having quattro AWD and my engine sitting in the right direction making the car worse than it started?
how much would this build cost in 2024? 4g63 awd vr4 with the 6 speed tranny
swap mounts are $295 shipped from us. email familymanracing@gmail.com as for a swap, if you are clever at finding parts, you could do it for no cost since the stock 3000gt parts are worth money. as for 6sp, that won't work. you have to use a 5sp (or auto) trans from a DSM
Adding tubes never seem to end. Good work.
🤪
Did you have trouble with the pass drop colorado front diff to go with the driver drop ford diff?
Had some issues with electronic disconnect on Colorado axle and ended up welding it together. Also the Ranger has an Eaton truetrac LSD option which held up really well in Fore 9” rear. The Colorado had nothing. Lastly, the ford is shorter so I can run longer CV axles which will allow me to get the car low up front before axles bind. I hated how much wheel gap I had before.
@4familyman oh that makes sense. Love the build can't wait to see it done
@@Anthonylq9ttappreciate it!!
I am happy to see a spot for the factory fog lights!
TBD. Those may get covered with some FMR DIY version of Angry Aero covers.
👍👍👍👌👌
👌
Front end is coming along nicely! Love the use of parts from other cars.
Thanks!! Yeah I like finding cost effective ways to go fast and look good!
hell yeah!
Agreed! 😂
What transmission are you using?
Powerglide
👌
just do a dry sump
Yeah that would be ideal, but also takes up some space
Llama Hammer😊
😂
im trying to ls swap my 3s how in the world did you cut everything to fit. did you cut the subframe and the fire wall and if so how. please help i already got my engine out😭🙏
Start watching all of my vids! It’s a LOT of cutting, welding, measuring, and learning about suspension geometry
❤
Nice!
Awesome man. Can't wait to see this one running around the neighborhood.
Crikey! You really should just build your own car some day! Love these vids.....
Thanks!!
That’s it I’m sending you mine so you can work on it
Have too much junk already 😂
White lightning.lol. I gotta say man you developed pretty much the ultimate drivetrain for 3kgt, in my opinion. I cant help but wonder if that drivetrain could be shoehorned into a dsm🎉
Anything is possible
Probably need to find some stock struts 😊
😂
Looking good
Thanks!
Lima Bean
Clever ! 😂
I know you're going to be using a massive intercooler, either use it as a brace between the lower tubes and the header panel or make a removable package rad and intercooler like Garret's car had. Make pulling the engine easier.
Yeah for sure! The FMIC will probably end up being the perfect support
White Hammer.
That sounds a little too close to what I imagine a clan member might shout 😬
@@4familyman sounds like something a lonely woman has in her night table.
@@4familymantrue.😆 These days... I was trying to work with your thought.. (failed) 🤷🏽♂️
@@jamesconklin9531I don’t hate it, but I’m also not looking to get pre-cancelled 😂
@@4familyman"Snowhammer 3K" avoids the term "white", and invites several inside jokes referencing Warhammer 40K. See the video "Astartes" if you don't know Warhammer lore. IIRC Henry Cavill will be making a movie about it, so the car could be racing at the same time the movie comes out, which could be fun.