- 69
- 70 774
Toby Muirson
Приєднався 24 лют 2007
I do fpv stuff
Hdzero goggles vs Sharkbyte Vrx (beta firmware) Osd refresh test.
Not my scientific method of testing the refresh rate but it appears the sharkbyte vrx with beta firmware rev 28042023 might be slightly faster than the hdzero goggles.
I tried to line up the osd a best i could.
I tried to line up the osd a best i could.
Переглядів: 473
Відео
Hdzero ImpulseRc Apex - Freestyle Lite Firmware test.
Переглядів 141Рік тому
Hdzero Freestyle Lite firmware 27042023 Impulse Rc Apex Diatone Mamba f722 Ethix Silk v4 2306 2345KV 4s Hdzero tx5m.1 Vtx Hdzero Micro Hd Camera Tbs Triumph Pro mmcx Tbs Crossfire Nano rx 915hz Hdzero goggles with Tbs Triumph pro stubby
Hdzero Goggles - Head tracking
Переглядів 2,7 тис.Рік тому
This is a short video on how to get the head tracking to work on the new hdzero Goggles. You will need at least firmware 8.0.0 and a stereo 3.5mm cable, I have been told that a mono 3.5mm cable works also but it didn't in my case.
Wokesnail - First few packs down.
Переглядів 269Рік тому
I finally get a few packs into my walksnail quad. Founds digger to power loop.. Good times. Hdzero Goggles Walksnail vtx with iflight omni antennas Jumper t18 Crossfire micro v2 tx Tbs source one v3 Mamba f405 Ethix cat 4 2207 2400kv 4s Walksnail full vtx Tbs crossfire nano rx Ethix watermelon props
Beach flight - Reptile Dragon v2
Переглядів 1 тис.Рік тому
Plane: Reptile Dragon v2 Flight controller: Matek h743 v3 Flight software: Inav 6.0 rc1 Motors: stock pnp Servos: stock pnp Props: stock pnp Vtx: Hdzero Freestyle 09012022 Camera: Hdzero V2 runcam Antenna: Tbs Triumph Rx: Tbs Crossfire nano pro w/ Immortal T Battery: Tattu 5200mah 4s 35c Radio: Jumper T18 Tx Module: Tbs Crossfire Micro v2 Goggles: Fatshark Hdo Vrx: Sharkbyte Vrx 06012022 Antenn...
Boxing day chill - Hdzero Beta Osd font testing.
Переглядів 296Рік тому
Re-upload Testing out the custom Osd fonts for Hdzero from Sneaky Fpv. Quad is: Frame: ImpulseRc Micro Reverb Fc: HGLRC Zeus35 AIO 3-6S F4 Flight Control 35A Motors: T-Motor F1507 3800KV Props: T-Motor T3140 Vtx: Hdzero Race V2 200mw Camera: RunCam Nano Hd Rx: Tbs Crossfire Nano W Immortal-T Radio: Jumper T18 pro Tbs Crossfire Micro v2 Goggle: Fatshark Hdo Sharkbyte/Hdzero Vrx TrueRc X-Air 5.8 ...
Fully 3d Printed FPV Wing - Will it fly?
Переглядів 7 тис.Рік тому
Printed this one winter, Its been sitting in my garage for over a year, lets yeet it into the sky and see what happens. To Print this yourself: www.thingiverse.com/thing:4547317
Morning Formation - Dart Xl
Переглядів 2932 роки тому
Peaceful morning formation chase with my flying buddy in his Dart xl. Chase wing. Ar Wing Pro (pnp) Hdzero Freestyle vtx Hdzero Micro V2 Camera Tbs Crossfire Nano Pro Rx Tbs Immortal T Rx antenna Matek F405 wse Fc (Inav 4.1.0) Matek Ublox SAM-M8Q GPS Module Gens Ace 4400mah 4s 35c Lipo Gopro Hero 8 Ground Gear: Jumper t18 pro Tbs Crossfire Micro tx v2 Fatshark Hdo goggles Shark byte Vrx Vas Mad...
Ar wing - Cloud surfing
Переглядів 2882 роки тому
Small bit of fun in the clouds. Parts list: Ar Wing Pro (pnp) Hdzero Freestyle vtx Hdzero Micro V2 Camera Tbs Crossfire Nano Pro Rx Tbs Immortal T Rx antenna Matek F405 wse Fc (Inav 4.1.0) Matek Ublox SAM-M8Q GPS Module Gens Ace 4400mah 4s 35c Lipo Gopro Hero 8 Ground Gear: Jumper t18 pro Tbs Crossfire Micro tx v2 Fatshark Hdo goggles Shark byte Vrx Vas Mad Mushroom v2 Omni Antennas TrueRc X-ai...
Hdzero Ar Pro - Maiden Dvr
Переглядів 9292 роки тому
This is the maiden video of my Ar Wing Pro using the Hdzero fpv system. Parts list: Ar Wing Pro (pnp) Hdzero Freestyle vtx Hdzero Micro V2 Camera Tbs Crossfire Nano Rx Tbs Immortal T Rx antenna Matek F405 wse Fc (Inav 4.1.0) Matek Ublox SAM-M8Q GPS Module Gens Ace 4400mah 4s 35c Lipo Gopro Hero 8 Ground Gear: Jumper t18 pro Tbs Crossfire Micro tx v2 Fatshark Hdo goggles Shark byte Vrx Vas Mad M...
Hdzero Protype Pdb for Wings
Переглядів 5242 роки тому
I was sent this pbd by MacDaddyFpv to test. It is a low cost, low weight pdb that runs inav 4.1.0 in the background to bring a osd for the hdzero digital fpv system to be used in manual wings. The git hub right here: github.com/MacDaddyFPV/WingPDB4HDZERO MacDaddyfpv: ua-cam.com/channels/qrukK8Jh2evq05AmiLubYw.html MacDaddyfpv's Flight video: ua-cam.com/video/Fiv3V882rBs/v-deo.html
Volantex Ranger Ex 757-3 Inav build Walk around- Opentx goodness
Переглядів 1,5 тис.2 роки тому
This is my walk around before the maiden of my Volantex Ranger Ex.
Sweepwings Flinch - Gopro Hero 8 Hypersmooth 2.0
Переглядів 712 роки тому
Sweepwings Flinch - Gopro Hero 8 Hypersmooth 2.0
Great Day Out - Smashed Quad, Bando exploring
Переглядів 1032 роки тому
Great Day Out - Smashed Quad, Bando exploring
Inav Full Canvas Mode is here!!! - HdZero/Sharkbyte
Переглядів 1,4 тис.2 роки тому
Inav Full Canvas Mode is here!!! - HdZero/Sharkbyte
Hdzero Nano Camera - Iflight Alpha A85
Переглядів 5112 роки тому
Hdzero Nano Camera - Iflight Alpha A85
Hdzero Race V2 Vtx - Source One Maiden
Переглядів 6712 роки тому
Hdzero Race V2 Vtx - Source One Maiden
Park chill - Sharkbyte Runcam Micro Hdzero camera
Переглядів 2173 роки тому
Park chill - Sharkbyte Runcam Micro Hdzero camera
First Light - Tbs Caipi 2 and Ar Wing 900
Переглядів 2283 роки тому
First Light - Tbs Caipi 2 and Ar Wing 900
Tbs Caipirinha 2 - Reelsteady go testing
Переглядів 1393 роки тому
Tbs Caipirinha 2 - Reelsteady go testing
Where you flying at mate
Can i ask where your flying looking at getting a wing and want some large open areas cheers
Pretty good. I did similar, I took the bits from the yellow X- 18 2 channel and put on the glider. Motors came from the white Kmart drone.
We really are so lucky that out of the 3 fpv goggle makers. One of them is open source friendly
Does ELRS require those goggles? Are they proprietary?
I really like the Caipirinha 1 and 2. Sadly they don't sell anymore. Has any good alternative fly wing for FPV for buy today or plans for DIY bild?
They are in stock at the moment of this comment at the tbs website.
I got the RC glider X-81 for $39
"Fancy HDMI godness" - does it mean "cool" or "suck"? 🧐
looks very similar to Ritewing Mini Drak
Your 915/868 antenna is mounted flat, you are a noob ;))
Why stereo when Manual clearly say it should be mono ? I'm struggling to get this to work with my radiomaster boxer - any advice ?
Because mono didn't work even though the manual stated mono. Stereo worked for me. Try using stereo.
@@TobyMuirson Thanks
I cannot get this working with a (3 different) stereo cable on either TX16s or Zorro. I'm waiting on mono cable. I'm not sure if I'm overlooking something but it sure doesn't work. I'm hoping my goggles are actually outputting the signal. I did get this working wirelessly with ELRS backpack however.
What is the weight with the battery please
Hi , how are you... how can I contact you please... I'm looking for your instagram but I can't find it to send you messages... please let me know... greetings from Chile
Thanks for putting this comparison together. 👍
Both within a margin where it does not really matter anymore.
This is true. I'm very glad they had got the refresh rate to the same as the goggles.
Love it
Looking good!! I also just got the HDZ into my Apex. Loving it.
Thanks for the file. I look forward to the update. :)
Love it! Succinct and to the point. Very simple setup both on the goggles and TX. Thanks for the tutorial!
Wich antenna do you use on the vtx?😊
The tbs triumph pro.
@@TobyMuirson is it about 85mm ufl or longer?
Thanks for the video. Does the head tracking still work if you are using the HDMI input and using the walk snail? VRX
Hi, yes it will work as its not based on the video link
Great mate. Thank you for this tutorial.
What face pad are you using?
It's the pu vinyl one for a skyzone o4o
Nice and simple, good video!
*Promo sm*
After using the asprogrammer tool to flash the new firmware, does the vrx need to be power cycled and have to wait for the the three blue flashes like if you were to update through the goggles?
No, it's ready to use.. Except the unlock firmware. That needs to be powered to unlock the vtx.
@@TobyMuirson I had flashed the unlock fw using the frsky hdzero tool (so the vtx was powered, albeit only by a 5v source) and then disconnected the usb before reconnecting it and then flashing the latest vtx fw v.1.1.0 again with the same tool.
Thanks for making this tutorial
Very cool. I've seen people ask about getting a head tilt warning for patches. This could easily be used to achieve that with the radio playing a sound when the tilt reaches a threshold.
Yeah, just a special function.. Super easy to do
@@TobyMuirson could this be done in the goggles menu, maybe by displaying the HT data on live screen ? I don't like having another cable dangling from my goggles. I searched for something like this in the settings but found nothing.
Thank you Toby for making this video. It is very helpful
Great. Thanks, buddy
set the wb to 5500 then the colors will be even more beautiful 😜
Cheers, I'll give that a go
Looks good my friend
Nice spot. Awesome freestyle skills. I am loving Walksnail
I think once I get it on a wing, I'll really know if it's for me.. I can definitely feel latency in the system compared to hdzero.
Good day! What is your propeller-motor group on this model?
nice! How did you add the font thought?
I think the most interesting thing about this is you bought it at Kmart I thought they were all gone
Good afternoon. what is your flight weight and propeller group?
Have you flown it agin? any updates on cg position? Cheers
Awesome effort, I too have this plane sitting in my shed waiting for me to install a Matek flight controller. There is another guy on youtube a couple of years ago who flew his. He discovered it needs heaps of reflex in the elevons to fly level which explains the manual mode nosedives. Despite the aerofoil section been extremely fast and efficient, there was no reflex built into the design and flying wings absolutely need this. Great to see that auto launch handled it. Maybe mine wont destroy itself on takeoff...which is what I was expecting...
what is going on with artificial horizon? and that is inav 6.0?!
Are you in Australia? If in Sydney you can purchase gliders for $3 each. At bargain warehouse in Warwick Farm
If you record in .mov it looks better.
Yeah Only a little bit better than analogue these jokers what are they talking about. In all honesty they probably just cant see a huge difference because the goggles they were flying on were tuned for analogue video and the goggle optics etc didn't show the difference that much and the dvr is not super high bitrate. Clearly the new goggle will change this. Nice flight BTW
Exactly, I can't wait for my goggles to arrive.. I've ordered the walksnail vrx also, to see what it's all about.
On a similar note, someone asked if this was avatar or dji... If they can't tell the difference, it clearly must be better than analog.
What are these OSD FONTS? Awesome
Yeah, standard osd fonts
Nice flight
Good to see DJI and it's dictatorial practises....will be not the top pick going forwards for fpv freestyle!
acro is not manual.
No way..
What Camera Size?
I've got a micro camera in it, but you could make any size mount for it. It's not supplied
@@TobyMuirson this is the problem i am not fit with CAD Software
what is the wingspan of that glider?