Відео

I haven't tried either of them. If you want a cheaper one, I recommend you the KTT Red Wine.

Yes, the shape of the film fit exactly there.

@jpbulbulian if lube the switches require patience, apply this film even more. Congrats for the job!

@@SBCBits That's true, but for me it's therapeutic.

Hi, yes it's the same software. weikav.com/waikv-software/

Genial! Me alegra lo hayas podido arreglar. Saludos!

Hi. The Kang White has a bit more travel, 4.00mm versus the Wine Red's 3.8mm.

@jpbulbulian thanks! How about the tipping weight?

@@SBCBits 114 / 5,000 They are the same, they have the same spring. It is important to hand lube the springs and stems. I used krytox 205g0.

Yeah, I like a lot. I have to try the HMX, there is a lot of hype around it.

Hi, thank you for your comment. I appreciate. The poly is to remove some of the hollowness of the case. Check this video to listen how its sound totally stock ua-cam.com/video/Li4HYWR-0_Q/v-deo.html

@@jpbulbulian nice! Can you tell about the KTT Wine Red choice for the stabilizers?

I like a quieter switch for the stabs, but it didn't make a huge difference.

@jpbulbulian I will buy 10 of them to test. Thank you for the advice

Hi, yes it has. Check this part of the video. ua-cam.com/video/EoyXKou4mrk/v-deo.html

​@@jpbulbulianTHANKS AND ONE MORE QUESTION. DOES IT HAS REACTIVE RGB EFFECT?? ACTUALLY I AM PLANNING TO BUY ONE IF IT HAS.

@@ratul_x_ryuu Did you mean synchronization with music or a game? I think not, I did not see that option in the software. There is a mode that react to the touch of the keys.

@@jpbulbulian YES YES THAT'S WHAT I WAS TALKING ABOUT LIKE WHEN I PRESS E KEY , THE PARTICULAR KEY WILL GLOW UP THEN GLOW DOWN.

@@ratul_x_ryuu Yes, you can do that. With Fn + \| you can select the RGB modes.

Yes, it's. 😆

Hi. Yes, it's stock.

Hi. Yes, the LEDs was removed also.

Hi, good question. I don't think it adds any additional risk to the fact that there is already a battery inside the keyboard. In fact, it is an extra layer of insulation that protects the PCB in case of a leak.

@@jpbulbulian Gotcha, I was planning on buying and modifying my own GMK67 and was gonna use tape mod. The battery has me hesitant. Do you know if it’s possible to take out the battery though? I’ll feel extra safe if I can.

Yes, you can take it out and use the keyboard wired.

@@jpbulbulian Sweet!

If you will make the holee mod, you have to make the Tape Mod at the end of the process. Sincerely, the Tape Mod is imperceptible. You can avoid it.

@@jpbulbuliani was just planning on how doing the tape mod only

You don't need to desolder nothing to make the Tape Mod.

Hi. It may be the connection between the batteries and the PCB. The keyboard does not work with bluetooth or 2.4ghz?

Which one?

Hi. Yes, it are compatible. You have to re calibrate the keyboard.

Hi. I don't know. The microcontroller is the Nuvoton M484SIDAE, I think it''s not compatible with QMK.

@@jpbulbulian Alright, thanks for the reply!

Hi, the Lucky65 is far better IMO. The alimumiun body make the differrence. The GMK67 seems like a toy towards the Lucky. The only plus point of the GMK67 is the support for PCB mounted stabilizers. The video version is v1, now the v2 has FR4 plate and QMK/VIA compability. The next month I will try it.

@@jpbulbulian I just saw the Lucky v2 and am almost 100% set on getting it XD. I am thinking of pairing the milky white lucky65 v2 with the gmk soy milk keycaps, do you think they will look good together? Also, I was a bit confused, what is the difference between the 5 anodized colors and the 2 electrophoresis (e coated) ones?

I think it will look awesome! The light colors can not be anodized to the aluminun, that is why they use the electrophoresis. The difference is the the texture, the anodization feels like naked metal, and the e-coated more like a paint.

Hi, try using Fn+Backspace to switch the RGB modes. Check the manual for more lighting functions. Or reset to factory settings as last resource.

@@jpbulbulian Didn't work, thank you, is a defect :/

Hi. You will need a desoldering tool to remove the switches. Then a Soldering Iron to put the new ones. In the description there are affiliate links to the tools I use.

@@jpbulbulian I ordered a new keyboard lmaooo

Hi, you have to press the top upwards from inside.

@@jpbulbulian oh ok thank u

?

Hi, that is true the switches are tight to the plate. You have to press very well the wings of the switch , then do little movements top and down until loose, and then pull it upward.

Hi. I didn't try the S version. But I think the only difference is the screen instead of knob.

@@jpbulbulian yea thx for letting me know bcz I actually prefer screen so i was thinking of getting that

I didn't try the wooting. But I think that one is better. This is in the budget range, it cost 100 usd less.

@@jpbulbulian but I want something that can compete with the wooting that is cheaper and can do the same thing idk if your a fps guy or just a modder

I'm not a gamer, I cannot give an opinion from that perspective. The only thing missing in this board its the null binding feature, but some games are banning it.

@@jpbulbulian ok that’s useful

I agree

Hi friend. There is no way to remove the stabs without desoldering the switches. But you can lube it with a syringe just removing the keycaps.

Hi, V3 Pro

@@jpbulbulian Ok, thanks

Hi, the cotton its the same than polyfill. The idea is to remove some hollowness in the stock sound. In my experience there is no difference with the Tape Mod in tray mounted boards.

@@jpbulbulian Thanks! Just did both right now and put tape inside my spacebar keycap, it sounds significantly better, but i put way less polyfill than you and didnt put it ind the baterry part, is it ok to just fill the whole thing?

That is a good idea, I will try to fill the spacebar with silicone. Its very clacky right now. I put all the polyfill than I can. Now I note a more solid sound.

Hi Jan, thank you so much for your comment! I'm very glad you like the keyboard!

Hey buddy, I'm glad you like the video. In my opinion, the most important modification is the lubrication of the switches, the stabilizers came very well from the factory. Then, the switch pads on the PCB are a matter of taste, I like the poppy effect it gives. And the poly filling is to eliminate some of the hollowness, but it's optional. I'm impressed by how cheap this keyboard is.

@@jpbulbulian Thanks for the tips! I'm also really impressed by the value of this keyboard. I'll definitely take your advice and lube the switches, and probably add some filling to improve the sound. By the way, have you ever considered or experimented a rechargeable battery mod somehow? Or has using AAA batteries never been an issue for you? Cheers mate

@@paul9812-t3i I'm using this s.click.aliexpress.com/e/_DdcMOIb are USB Li-ion AAA Rechargeable

Hi friend, it seems that it is no longer available.

Hi my friend! Hope you enjoy it.

Abrazo de gol hermano! me alegro te haya gustado