Відео

How did you go about lubing your bullets? Did you spray them as a group, roll them on a pad, or just put a little on a plate and roll the bullet through it? I just did this with some Remington golden bullet, 40 down the tube dry and 40 were sent lubed (90% hydrogen peroxide/10% lanolin), not having a spray bottle or pad, I rolled them and then set them in a box with the bullet downward. I coated them in groups of 20 with the first group having one coat and the second group having two coats. The first 20 had better groupings and could make the case that this is a benefit although, maybe too wet because FPS was lower than dry. The second 20 got too wet because it turned all of the rounds into subsonic ammo, decreasing the velocity from approximately 1100 FPS to the low 800s and the grouping turned to absolute crap.

A good test ,, thank you.

In the Airgun world shooting both pellets and cast bullets we have been experimenting for years with different lube's. Two that stand out is 10 to 15 wt liquid silicone oil designed for RC shocks. The other is finish line dry lube for pellets. it is a higher end dry lube for bicycle chain use. It is very popular in field target shooting to get more consistent groups. For the slug's I cast, using the silicone oil not only is more accurate, but prevents fouling of the bore for a much-much longer period of time. KnifeMaker

I hope you do all this soon!

The lubrication also helps in minimizing fowling. Lead bullets don’t tolerate a lot of heat before they start to deform and I think the wax helps with the temps. I am not an engineer by any stretch of the imagination but we all know that lead is softer than some other metals. Good video really enjoyed it. That’s a very nice setup you have there.👍🏽

I ran a test like this many years ago...I think it was in the 90's, but possibly early 2k's, but I used Alox for the lube. I've always wanted to retry the test with Alox and rolling in graphite and or mica after drying to prevent grit pickup.

Did it year ago. It made a difference for the better. Preperation H, bees wax, couple others too. Worked on bulk ammo. Actually seemed to help for a couple non lubed bullets afterward too.

How about Hornady one shot

Right down the rabbit hole! This looks like it will be my next experiment 🎯

All .22lr are lubed. Some are waxy. Some feel dry and some are oily. Leave them alone. Anyone who wipes them off or tries adding a line are messing things up. These manufacturers have found their secret sauce that works. CCI’s are lubed. It’s just a dry lube. Not one .22lr maker in the world makes .22lr ammo that is not lubes. Your holding is shaky and your not holding each one is the exact same place. You need to work on your shooting. Way too fast between shots also.

I use red grease it tightens up the groups pretty good !

I’ve done this with Hoppes #9. Just dip the tip of the proj into the Hoppes, not too much, chamber and fire immediately. Messy, but you will see tighter groups.

Great idea thanks for video. although the 50 yard showed promise it went away at the 100 yard. I'm thinking a lube that is much thinner viscosity like cooking oil possibly.

That rifle shoots CCI like Match ammo! What in the world is this proprietary blend of secret herbs and spices. How do I get my hands on the recipe 🤔 My new rifle seems to like CCI SV but maybe not that much!😅

😂

Cool test!

Great science project! Appreciate you doing the homework for us!

I actually had this exact same idea 😮 I got some lube to try this also! Wish I could get ahold of the SK lube they use 😂 Looks like there is something to this 😮

Good job.

That's food for thought

LUV THE THINKING OMN THE SUBJECT..... THE RABBIT HOLE RUNS DEEP 🤔🤔

👍

That a pretty interesting experiment, positive results from what I see. May have to try this myself.

In your opinion what was the best ammo? I normally shoot blazer and fairly happy with it.

Good shootin' with ya this weekend, man! That was an awesome match!

That was some fine shooting! My first attempt was plumb embarrassing! New rifle and a quick decision on ammo got me!

Innsanee aim

Federal Automatch is my main plinking ammo. I was hoping it would do good as I've piled up thousands of rounds of it. Lol

I can't believe that people still keep buying a ten twenty two they are not accurate and putting all the aftermarket stuff on them and they still won't shoot even close to accurate with all the money they put in them they could have bought a cz457 one accurate rifle. Beagleman

Nice score! Almost perfect!😮❤❤❤

Hi, Damin. Where can i download the show me the money target?

Haven't been having much luck with SK recently myself. Eley has been pretty good to me though. I can't remember if I asked you already, but your action doesn't seem to have the "hump" a lot of bergaras have. Did you have anyone work your action over?

Damin. Good video and great shooting. That is one tough challenge target. Thanks for sharing and take care.

Damin. Good video and great shooting. That is one tough challenge target. Thanks for sharing and take care.

If you can Please go and help Elijah out over at Day at the Range and donate to St. Judes dayattherange.com/charity-shoot-show-me-the-money-or-pay-the-tax-man/

If you can Please go and help Elijah out over at Day at the Range and donate to St. Judes dayattherange.com/charity-shoot-show-me-the-money-or-pay-the-tax-man/

You done did good 👍

Nice!

Damin. Good video and shooting. Not an easy challenge! Thanks for sharing and take care.

DG. Good and fun video. Great shooting. Thanks for sharing and take care.

I scanned this and printed it out on regular size paper 😮 Pretty cool little game 😎

Very impressive, those are some small targets

I have the gen 1 acc on the way, I guess the 1.25 fits good in there, what bolt handle knob combo is that and did u have to do anything to the mag catch or that how it came out of the box

ummm ... will not be getting one now 🤬😡😤

Damin. Good video and great groups! Thanks for sharing and take care.

💀🥜📌🔨🎯

Good work man! Glad to see videos of NRL expanding.

Atta boy Todd!

Awesome, it looks like a lot of fun

I have a broken side panel also my question is how did you remove the recline arm that also seems broke this is a used vehicle that I just bought but I want to fix the issue with it