Відео

Hi, thanks for your suggestion. Yes, the electrician is coming in 1st, then I've got the insulation, Vapour Barrier, and internal walls/ ceiling to do. Hopefully, it will be a clean job 🤞 That's the look I'm going for anyway 😀 The Galvanised Steel Base was for a couple of reasons. 1. I think it would have cost a lot to excavate the ground to make it flat and then put in a concrete pad. 2. Will get a nice bit of air flow underneath, so it will prevent rotting and potentially sitting in pools of water on a concrete pad. Thanks for supporting my channel 😀

Cheers, Craig. I'm very pleased with it and can't wait to get past all the fitting of insulation, interior walls, ceiling electrics, etc, and start out-fitting it and, most importantly, getting Pineys new tank scaped and cycled. Lots of plans, and hopefully, more content. Cheers for supporting my channel 😃

Neither can I !! 🤣 Got plans, but I'd also love to hear other people's suggestions too. See where it takes the channel 🙂

Thanks 😀 Was hard at the time, but you learn by your mistakes! Onwards and upwards now 😃 Thanks for supporting my channel 😀

I usually just leave it for a couple of hours, but on this occasion, I got sidetracked and finished off the video the next day 😅

@@ReefDramanew subscriber and appreciate the content of your videos…😊

Thank you 😊 That's great to hear. Thanks for supporting my channel 😀

Hi Mark, I'm glad the video helped you 😀 Yes that's right, although you may want to have the difference between T1 and T2 less, otherwise you may experience Heater Timed Out and it will stop heating and sound an alarm showing a certain error code. I can't remember what mine is set to now, but probably only has like 1 or 2 degrees difference. Thanks for supporting my channel 😀

@@ReefDrama thanks heaps

Oh no 😞 I know how you feel. Nitemare, isn't it! Yup, quarantine is the only way forward, and we all learn by our mistakes. Onwards and upwards! Hope you have managed to restock, and the problem is behind you 😀 Thanks for supporting my channel 😀

That's very good points. It could have been too much adding them together, although the tank was stable and had been running a long time beforehand. I think their diet was fine and definitely wasn't lacking in anything as they all get bits of mussel and cockles from feeding Piney. Probably won't ever fully know the real reason, but one thing is for sure, I will always quarantine now. Thanks for sharing your thoughts and for supporting my channel 😀

I would imagine I had hundreds, too, as so many were small and even growing out the sand. Even if you can count them, you've still probably got loads! Hope you sorted yours 👍 Thanks for supporting my channel 😀

Hope all went well for you. Did you have any issues with the Termite spray? Thanks for supporting my channel 😀

Hi, awesome. Thanks. I'm glad it will help you when you move 😀 Plan it through and allow yourself more time than you think it will take. Good luck 😀 Thanks for supporting my channel 😀

Hey, thankfully, nothing. I was just moving house 😀 Thanks for supporting my channel 😀

@@ReefDrama hope u get to the 1000 subs soon

@enzomontini758 thank you. Me too 😀

Thank you very much 😀 Thanks for supporting my channel 😀

Oh, sorry to hear that 😞 Great decision to upgrade at that time. Made the most of a bad situation. My clowns and chromis are in there because Piney the puffer would eat them !! Once he's moved out to a larger tank, they will then move upstairs 😀 Thanks for supporting my channel 😀

Thank you so much for your kind words 😊 I'm pleased my video helped you. Thanks for supporting my channel 😀

Thanks for the heads up. I will look into that when I get back from Canada 😀 Thanks for trying to support my channel 😀

Hey mate, it's not really a fair representation due to the fact I have a massive, messy eating Porcupine Puffer, so my nutrients are always around 20-30 ppm Nitrate and 0.1-0.2 ppm Phosphate. I also dose No-Pox. Once the Piney is moved into his new home (upcoming video spoiler alert ⚠️), I'm hoping the nutrients will come down and then I'll be able to see what happens with regards to having the Reef Mat taking everything out. Thanks for supporting my channel 😀

Hey mate, wow, yeah, moving every 2-4 years is not something you want to be doing with a massive tank! Totally understand why you have to have a smaller tank, and to be honest, I take my hat off to you for having a saltwater tank in the first place. I'm guessing your time is pretty limited, so it's amazing you've the time to enjoy your hobby as I know smaller tanks require more upkeep. I hope you can upgrade to the 32 AIO as that will be great. Sounds like you do the same as me with equipment and buy over the top so it future proves you when you upgrade. Good luck, buddy, with the new tank. Stay safe! Thanks for supporting my channel 😀

@@ReefDrama yessir! And to be honest it’s not all that difficult, I mainly just keep up on weekly water changes only about 1-2 gallon changes so it’s only about 5-7 minutes out of my day and I run carbon on my system and I buy my water from my LFS to save time and it’s more stable for me and I have my lights on a timer now as I’ve upgraded to more controllable LEDs, I also have softy’s and LPS as they are much more forgiving and then for fish I have 2 black ice clowns and about to buy my wife an orchid Dotty back or a bi-color dotty back as they tend to stay small like the clowns overall having smaller fish and a small bio load and hardy corals makes makes it more enjoyable for me

Haha, trust me, the stress was there!! 😆 Thanks. Hopefully, this video will be seen by people with any sort of aquarium really who will be going through a house move sooner or later. I am quite organised, with a splash of OCD !! 🤣 Thanks for supporting my channel 😀

Hey, thank you, much appreciated 😊 Yeah but I've only got the one. Sounds like you have multiple! 😆 Thanks for supporting my channel 😀

Thanks mate 😀

Thanks. Appreciate your kind words. That's my goal: I really just want to help people, whether that's through advice and tips or just by my own mistakes. Having some Bacteria in a bottle is something I forgot to mention 😞 Thank you, we've pretty much settled in now and haven't any more boxes that need unpacking! Basically, did the full house move over a long weekend. Friday eve and Saturday doing the tank, then Sunday hired a van and moved everything else just leaving some small stuff that would fit in the cars and Monday unpacking and putting away. Was glad of the rest going back to work !! 😆 Thanks for supporting my channel 😀

Thanks Craig, yes very stressful, but all done over a long weekend, believe it or not. Friday eve and Saturday for the tank. Then Sunday, we hired a van for everything else, leaving only small stuff that would fit in the cars and then Monday to unpack/ unbox and put stuff in its place! Had a rest going back to work! 😆 Thanks for supporting my channel 😀

Oh, nice one 😀 I think it's one of the best things I've brought for my tank. Those media holders I got from Ebay 😀 Thanks for supporting my channel 😀

Hi, I turned the pumps off when I 1st added them for a while so they could hide in the rocks and secure themselves, but after that, yeah. Pumps, crosswaves, etc, as normal. Thanks for supporting my channel 😀

@@ReefDrama awesome ty! I sell corals. I will start breeding berghia :0)

Nice one. Next time I need some nudibranchs, I was thinking to do the same thing 😀

Hey, you mean the Clarifiers? No mate. Hooked out and thrown away. Thanks for supporting my channel 😀

Awesome. When I expand and get another large tank for my Puffer, I'll be doing the same thing 😀 Thanks for supporting my channel 😀

Hello mate, I've only purchased from the place advertised in the video and also written in the description. Obviously, it's only any good if you're in the UK. Otherwise, I sometimes see people advertising them on one of the Marine Facebook pages. Thanks for supporting my channel 😀

Sorry to hear your troubles. It's not an easy thing to go through, unfortunately, but at least we learn by our mistakes, and I, for one, will always quarantine new / rehomed fish from now on. Good luck buddy, fingers are crossed for you. Thanks for supporting my channel 😀

Thanks. Will look into that although some chemicals you can't get in the UK. Thanks for supporting my channel 😀

Hey mate, no worries 😀 Glad the video helped you. It's an Evolution Aqua bracket. I have done a video on it called "Saltwater Tank Hanging Light Bracket 1200 | Evolution Aqua" if you want to check that out. Thanks for supporting my channel 😀

@@ReefDrama your a Ledge thank you so much My best Perry

You're welcome 😀

Hi, thanks for that 😀 much appreciated. Hope all goes well with your qt. Yeah, I think that's the key on any delicate fish that can't tolerate copper very well is to use Copper Power and slowly ramp it up. Remember, the time countdown starts once you have reached the therapeutic level. Obviously, do your research as some won't tolerate copper at all. Good luck, and thanks for supporting my channel 😀

Thanks 😀 was really tough and upsetting, but on this occasion, I only have myself to blame. Definitely will keep on reefing and expanding as well with a new tank for my Porcupine Puffer, but that's an upcoming video 😉🤫 Thanks for supporting my channel 😀

That's a shame you've had troubles. I would have had them off you!! 😀 When my Red Sea 425xl seal started splitting, I found their customer service to be very good. I must admit my Reefmat does have some sponges on it, but it comes out every 6 months for a complete strip down and clean. Otherwise, I just clean the parts that need cleaning during the fleece roll replacement. I would definitely buy another if required as it's so easy to take apart, clean, and replace the roll. Thanks for supporting my channel 😀

Hi, thank you very much 😊 The total length is 21 inches. That's not including the plastic Ferrero Rocher container I put it on and having a small bend in the top of the cable. Just incase you need to know, the screws on each feet are 15.25 inches apart. Thanks for supporting my channel 😀

@@ReefDrama brilliant thank you I have a reefer G2+425 and it’s going on the wall in my sump in I have roughly 54cm in width clearance so to be able to close the cabinet door. Tight fit but it will be ok 👍👍👍

Awesome. Glad I was able to help. Will you still be able to unscrew the cap and remove the bulb with it in place?

@@ReefDrama worse case scenario I will just have to take it off the side wall

Hi, I originally brought the RSR 425xl brand new for £1400 and they offered me like a voucher against a percentage of its equivalent value in today's money (back when this happened) which was a lot more than I paid originally, which I refused and went back with a counter offer. I presume I could have brought any Red Sea equipment with it ( I didn't actually ask that question, though), but I opted for the 625xxl G2, and I had to put money towards it. If I had wanted a different brand of tank, then I would have had to pay out for the entire thing, probably between £3000 - £4000 for a similar size which at the time I couldn't afford so I went with the best option for me. The customer service was really good in my experience, but then I was respectful towards them with my manner of written emails and when speaking to them! The main thing I took away was I should have put a 'Ticket in' straight away rather than waiting for the LFS that I purchased the tank from who I think was waiting for their Red Sea rep to visit them. Should the tank start splitting at the seams in the 1st place? NO !! But it did, and you have to just deal with it. Thanks for supporting my channel 😀

@@ReefDrama cool thanks for the response. I have been looking at these tanks for a while old and the g2 models and it seems like this is still and issue with there tanks and some of the horror stories i have seen with them outright refusing to warranty their products have left me a bit uneasy since I recently purchased a 350 g2. I guess if it fails it fails. I was too impatient to wait several months for waterbox or someone else. I guess time will tell if im just another in the seemingly long and getting longer line of unhappy customers.

Haha, yes I guess you're right, although in my mind when I set the channel up it was more about leaving the RODI unit on and flooding the floor, or a fish deciding it doesn't like water any more and wants to try it's hand at being amphibious or maybe the skimmer cup overflowing etc etc !! 🤣🤣 Thanks for supporting my channel 😀

Ha, is this because of the blue bag over the top of the skimmer? Lol. Just stops it spraying everywhere if it foams up. I did have a Skimmer Guardian, but I used it in the sump, so when the return pump stopped and water rose up, it would automatically turn off the skimmer. It has since stopped working, so it has been thrown away. Thanks for supporting my channel 😀

Hi, no, it's not free. Was a one off payment.

Don't bin it. Send it to me. I will need another one soon for another tank! 😃

@@ReefDrama To late mate , binned & gone , thank goodness, never going to buy this shit again !!

@ReefDrama Too late mate , binned, waste of £ 50 I've ever spend 🙄

Hey, sorry to hear you went through it, too. Glad your qt process is working for you. Keep on reefing 😊 Thanks for supporting my channel 😀

Hi, I'm so sorry to hear you've experienced the same thing. I hope by now you're through the worst of it and have started to restock your nano tank. When the tank is empty, it's a great opportunity to seed the tank with copepods and corals 😀 It's still upsetting to lose a fish, let alone all of them, but keep on reefing, we all learn by our mistakes. Thanks for supporting my channel 😀

Thanks. Yes, it was very upsetting, and what made it worse was it was my own fault! I'll look into that. Cheers. Thanks for supporting my channel 😀