Відео

What if your favorite color is rust-brown?😅

This video is made from which country.

Згоден з вами, якщо лимона кислота так зруйновує іржу, це добре 🤘😎

I use a MityVac vacuum setup.. Which can draw a full 1 bar ( -15 PSI ) vacuum... I also temporarily clamp brake hose and take out the nipple and wind some PTFE tape on the thread, this stops air being sucked around the nipple thread and also stops the thread from seizing in the caliper... I also just snug up the nipple with a short ring spanner, especially in aluminium calipers which can strip easily, especially with PTFE tape on thread reducing the friction.... The beauty of the small MityVac catch bottle is that if you fill the master cylinder reservoir to very top of the fill opening before starting a new wheel, the MityVac bottle will fill up before the master cylinder reservoir gets too low and this prevents sucking air into system ( which is a world of pain with ABS ) to make sure if put some tape around mityvac bottle and stop sucking about 20mm before top of bottle and soon as fluid reaches the tape. As someone else said - vacuum out the master cylinder reservoir and fill with fresh fluid right to the very top before starting to bleed the system and you will be sucking fresh fluid into the system, not the old stale fluid in the reservoir. Another caution is that brake fluid will take the paint off your car, wash off any spills ASAP with a water and dish soap mixture.

معلم كبير 🎉 بس كنت اتمنى تعطيها لون أصفر او احمر 😂

👍👍

Why 'restore' a working caliper? There was absolutely nothing wrong with it! Just to paint it? 🙄

Amazing, thx for the video. maybe worth to gather more money to but new caliper.

Do you use lemon acid to clear rust ? Water and lemon acid is safe for this ? How long did you cook with citric acid? How did you dry it then?

These videos are straight gas

these will rust fast

The video is nine minutes. Job done properly in this vid, but this is a 24 hour process, and twelve is stewing the calipers And hang the parts in the oven off a rack with short wire to avoid rack lines

And your wife allowed you to clean the clipper in the bathroom???!!!! And you still alive ??!!!

The caliper looks very similar to my Saab 9-3 front caliper. Definitely GM based.

I make the same with long pipe and revers pedal. Air goes into pipe and I blocked pipe or not (end in fluid sucked fluid back). In some moment air was in pipe or bottle and goes new fluid.

Yes. Please list the fluid used. Also some suggest water onto a hot engine and then revving the engine to blow out carbon exhaust?

What fluid did you use to clean pistons?

Sandblaster is 15 minutes

what car are these calipers from? i wanted to do a pad change on my 2004 accord and i have the exact same ones as you do, but i cant find anything on the internet similar to what i have. do you have any tips on removing the two caliper bolts? i managed to remove them 3 but one got stripped. very annoying design.

❤️❤️🥹

Bravo

Шикарная работа!

youtube.com/@tha2nd?si=PIQr46cCDmHpGcnd

Что он хотел показать?

Такие вещи новые надо покупать, от этого жизнь зависит. Там все зазоры уже не в допусках.

Great finish! How long did you bake it for?

Такое впечатление что ты мину акустическую разбираеш одно не верное движение и тебе оторвет яйки. А сначала видоса думал что должно что-то полететь в космос. Сам не за ... Ладно. Не задумывался😂

Wonderful!

Annoying me the background music. Not necessary!

Что то мне подсказывает, что лимонной кислотой , этот дятел угондошил цилиндр

Nice job 👍

Hey what's your opinion on those wheel spacers?

Can’t fault the work but the background noise is diabolical

So no air in the system?

Mine looks like they have been through the ringer of rusty dicks, i will try this method when i have the time. 👍

Nice to have all that equipment to do this.

How *NOT* To Change Brake Fluid

Beautifully done

"Like from factory"... You never reach the reach the factory shape again without a Zink coat. This method is only a question of time until its rusty again.

Great idea, you still need to pump a little to work out any air. Great job

a litle bit longer than 9 minutes ... great workmanship!

2 days later they are dirty as hell.

is this real? Lemon acid removes rust?

I saved my keyboard !!

Nicely done job! It was good to see the use of citric acid, because that's a great way to remove rust and I've never tried that, with a caliper, so far.

Разве можно запекать детали крашеные обычной краской??????😮

No lo hagan es peligroso

that is not 3 min that is like 2 hrs LOL

Ottimo lavoro super 👍👌

Ficou show de bola !