Відео

Hi and thank you for your comment. I use baking powder not baby powder (but I could have pronounced it a bit better in the video😁). It works a bit like the activator spray and makes the glue stick instantly.It also generate a lot of heat so have experienced PLA parts melting together for the perfect connection :) Looking forward to sharing the third part. It gets really fun when I can start adding some paint to the model. Will work on smoothening it out in the next episode. Once again thanks for the feedback, always appreciated :)

Yeah, she's going to look incredible :)

Would have loved using the gel version, it is so much better for this kind of projects, unfortunatly it's not as easily avaliable where I live. So to answer the question, I used the liquid CA glue combined with baking powder to make it cure instantly. Thanks for you question, really appreciate it :)

Looking forward to sharing the next video and finishing the model. Actually printed the parts more than a year ago, so it's about time I finished it :)

I ended up with the Arc Pro, got it cheap used. Have heard a lot of good stuff about Carrera though so you should also put that into consideration :)

Sorry for the late reply, been a busy week. I actually printed this terminator on a small Ender 3 Pro (235X235) and a CR10S Pro (320X320) so not really any large printers. I have upgraded to larger printers so if I should do the project again I would print some of the parts in a single piece instead of splitting them up.

Oh right thanks im thinking of making one but need the files. I found one online but it was more basic and didnt look as good. I just got a 420mm printer specially lol@@HobbyWorld_one

Thanks and sorry for the late reply, had a busy month. This is a great game, had a lot of fun with it already. Considering building a sturdy table for it.

@@HobbyWorld_one Благодарю что ответили,так приятно за океаном тоже находятся такие прекрасные люди, оценившие эту хорошую игру. Я играю в нее с детьми и женой.Жена очень хорошо в нее играет)

Hi and thank you for the comment :) The crate is only a small part of the whole model. The main piece is a full sized model of Mad Moxxi, and she is going to stand on the crate. So it's really important that it is as strong as possible as it is going to support a large portion of the main model when everything is finished.

This terminator was printed on a CR10S Pro and two Ender 3 Pro machines. The CR10 had the largest build volume of 300X300X400mm. However, with a larger printer you would be able to print the model in larger single pieces thereby saving yourself from a lot of work assembling everything afterwards

Thanks, really appreciate it. Looking forward to making next episode :)

Thanks for the great tip, I will keep that in mind for the next project. Really appreciate it.

@@HobbyWorld_one I came to say the same. I work with this stuff a lot. I would do 1 layer at a time and spray mist on it... it will cure at least the outer skin in no time :) Then you can spray foam the next layer and do the same. In the end you won't really take much more time, but the majority of it will be cured. This will also help cut down on materials since you can better gauge how much foam is needed.

@@bluebeast440 Thanks for your feedback, I'll make sure to remember that for the next time I use expanding foam. Really appreciate it, thanks :)

Thanks for checking out all of the videos, really appreciate it :) I have just started painting another full sized model of a character from the computer game Borderlands. So another great (and huge) project on the way :D

Thank and thanks for the kind words, very happy that you like the model, put a lot of work in it :) I can already see a T-800 sitting quietly in a chair looking out the window. Great scene 😊

Hi and thanks for the comment, really appreciate it. Used around 1050 hours to print the model (in total) and an unknown amount of work hours on painting, assembly and all the other stuff. This was a huge project, but I enjoyed every part of it :)

Hi and sorry for the late reply, have been buried in work this month :( In principle the idea is good, but then it would be very difficult moving the model around. I think the solution with a metal support works better if you want to be able to change the positione once in a while :) Thanks for the feedback, really appreciate it

@@HobbyWorld_one yea, I didn’t think about moving it. 🤙

Yeah it's a lot stronger than one should think. But if I should do it again I would have added a bit more infill :)

Thanks, we had a great evening and the track was amazing. Yeah I had a couple of pretty good laps 😊 Have always felt that slot car racing is a lot about feeling the car on the track. And pratice is never a bad thing :D Anyways, thank you so much for you comment, always appreciated

Glad you like it. The track ran really well and all participants got a good hang of driving on it as the evening progressed. Thank you so much for your comment, truely appreciate it.

Thanks, I'm very happy with the result, and I'm allready planning on building another track :D

Thanks :) I'll have to admit that I took a week without any projects after finishing this track. But had a lot of fun and planning on making a new track next summer. I have a huge SCX ARC PRO track laying in boxes at the moment :)

Thanks :)

Thank you, glad you like it :)

Thank you. I'm also very happy with how this turned out and it looks great in the room. Considering doing something like this project again next summer :)

Thanks for you so much :) The track controlbox are my own design and I will share it on my patreon later this month together with the other files I designed for this track. Just love using 3d prints for model hobby projects, there are so many opportunities :)

Thank you so much for your feedback, I will get some of that stuff and try it on the track. Always appreciate a great tip :)

Thank you for helping with that, English isn't my main language so some technical terms are missing in the vocabulary from time to time :D

Thanks, no reason to feel lazy I have three other tracks I have been working on for 2-5 years without getting them finished. Some projects you can just add new stuff from time to time :D

Thank you for following the project. This was a pretty good run but I can assure you that I'm going to take a short break for a couple of days now :) Have arranged an race event the 24th this month so we can find our first track winner. Will make a video about it so we can get some race action :) I have been so happy for my 3d printers in regards to my model hobby projects, I can recommend trying it. Once again thanks for you feedback, much appreciated

Thank you so much :) This isn't my normal work pace :D I have tracks I have tinkered with for years :) But that being said, I am so happy of how this track turned out, even considering doing a similar project next summer (I have a huge ARC PRO Track laying around :)

Thank you so much, really appreciate it

Thanks, really looking forward to racing on this. Have invited a group over for the 24th so we can find our first track winner :) Will make a video about the event :)

Mange tak, ja der er røget en lampe midt i rummet :( Dårlig timing, men der skal nok komme mere op på kanalen med den her bane så den kan få sit moment :D Tak for at have fulgt projektet :)

Thank you so much for following :) There will be lots of exciting projects on the channel in the future. I work with all kind of hobby projects so not everything will be about slot cars, but I promise that there will be a lot of slot car related projects too :) So far I have invited a group over for the 24th (this month) so we can find our first track winner :) Will make a video about the event so we can get some race action too :)

@@HobbyWorld_oneI can’t wait to see that!

@@wjspade Will make sure to share :)

Thank you so much for following the project, I am a bit tired right now so going to take a short break for at least a day or two :D) I have invited a group over for the 24th (this month) so we can find our first track winner :) Will make a video about the event so we can get some race action too :)

Thank you so much for following the project :) I have invited a group over for the 24th (this month) so we can find our first track winner :) Will make a video about the event so we can get some race action too :)

Yeah, I'm very happy with the result. Going to make some upgrades over the next couple of months. Really love how the track turned out so I have invited a group over for the 24th (this month) so we can find our first track winner :) Will make a video about the event so we can get some race action too :)

Yeah, the creator unfortunatly decided to remove the model :(

I have finished the work on the track, and the video is ready so I will upload it tomorrow. I have also arranged an event so we can get this track inaugurated. Will make a video from the race day, with track action and everything :) Thank you for following the project

Thank you so much, it has taken me years getting to this point (and lots of late working hours). Best regards and thank you for your comment