- 39
- 552 925
M10 Stuff
Приєднався 14 чер 2018
Random Stuff
Refrigerator inlet valve replacement. Whirlpool/Kitchen Aid
Turn the water off before disconnecting any hoses.
This is for a Whirlpool/Kitchen Aid refrigerator. But most are similar. I’ve seen this inlet valves leak and cause damage many times. If the damage wasn’t bad enough to do and insurance claim, or if insurance denied the claim, here’s how to replace it.
W10394076 W10865826 K-78282 W10726788 W10833705 W10872966 WPW10394076
As an Amazon Associate I earn from qualifying purchases.
amzn.to/4ejH1dM
This is for a Whirlpool/Kitchen Aid refrigerator. But most are similar. I’ve seen this inlet valves leak and cause damage many times. If the damage wasn’t bad enough to do and insurance claim, or if insurance denied the claim, here’s how to replace it.
W10394076 W10865826 K-78282 W10726788 W10833705 W10872966 WPW10394076
As an Amazon Associate I earn from qualifying purchases.
amzn.to/4ejH1dM
Переглядів: 79
Відео
How I bypassed the refrigerator filter and installed a high quality external filter. Aquasana
Переглядів 656Місяць тому
This is how I bypassed the standard refrigerator filter with a much higher quality filtration system. I decided on the Aquasana filter after looking at many different options and reviews. As an Amazon Associate I earn from qualifying purchases. Aquasana filter amzn.to/3BgwwcI 3/8 OD hose amzn.to/4gtSpFj 1/4 OD hose amzn.to/47Hyv5W 3/8 to 5/16 fitting amzn.to/3XPmDeM 1/4 hose coupling amzn.to/4d...
Installing a Tonal machine with 17”-24” stud adapter bars
Переглядів 5603 місяці тому
Installing a Tonal machine using the adapter bars for 17”-24” stud patterns. These adapter bars came directly from Tonal. I’m not associated with Tonal or sponsored by Tonal. I will also show you what I use for my personal Tonal accessories and link them below. www.tonal.com As an Amazon Associate I earn from qualifying purchases. Tonal accessory shelf clips amzn.to/46xqcc3 Tonal accessory shel...
Watkins Solana TX hot tub heater replacement. How I replaced my hot tub heater and pressure switch.
Переглядів 5958 місяців тому
Watkins Solana TX heater replacement amzn.to/3TEiZSF. How I replaced my hot tub heater and pressure switch amzn.to/4al0gRX. The element alone can be changed to save money amzn.to/3TClGnZ, but with the corrosion I wanted to replace the entire housing. Heater Part #31003 Updated part #73994 As an Amazon Associate I earn from qualifying purchases. Heater amzn.to/3VfGGCe Heating element amzn.to/43l...
Building a half bath in a garage and installing a macerating toilet. Saniflo Saniaccess 3
Переглядів 14 тис.9 місяців тому
How we built a half bath in a garage using a macerating toilet. While the macerating toilet is expensive, it saved a lot of time and money by not trenching a drain. They can be installed far below and drain line and pumped a long distance to that drain line. Comment any questions you have. Saniflo Saniaccess 3 toilet amzn.to/42i6Zt1 Safety Door spring closer amzn.to/4bfMVLT As an Amazon Associa...
Installing a mobile home exterior door
Переглядів 1,3 тис.9 місяців тому
How we installed a 30” x 74” mobile home door purchased at westlanddistributing.com in Sacramento. The wall studs were 16” on center so the door fit perfectly between them. This was a mobile home room addition and no header was needed, which there wasn’t room for anyway. Comment if you have any questions.
Replacing an old circular bathroom exhaust fan
Переглядів 10 тис.10 місяців тому
Replacing an old circular bathroom exhaust fan with an update rectangular fan. Broan 50 CFM fan. amzn.to/3RURbcc As an Amazon Associate I earn from qualifying purchases.
Repairing a Whirlpool oven by replacing the igniter.
Переглядів 28 тис.Рік тому
Whirlpool oven not working. Diagnosed and replaced the igniter I searched the model number online and found the part list quick. Then I entered the part number on Amazon. This fits a wide variety of ovens. See the list below. amzn.to/3Zt1Ywl As an Amazon Associate I earn from qualifying purchases. Oven igniter Model Number W10918546 W10140611 3186491 98005652 PS11770066 AP6037202 W10918546VP WP...
Installing foam faux beams with mounting boards and toggle bolts
Переглядів 759Рік тому
We installed these beams parallel to the joists and therefore used custom mounting boards and toggle bolts to hold to the drywall. This is the Fypon brand which was very lightweight and easy to use. Please comment if you have any questions or suggestions. Thanks for watching.
Installing a Lenco Trim Tab Switch Kit on a 2012 Mastercraft X-35 replacing the SmartWave system.
Переглядів 2,4 тис.Рік тому
Installing a Lenco Trim Tab control kit on a 2012 Mastercraft X-35 to replace the SmartWave system. This kit was to replace an older after market trim tab control panel. The adaptors were not compatible so we stripped the wires and connected with wire nuts for now. This kit was designed for dual actuator, which means two on each side. We only needed the single actuator kit for this install but ...
How I turned insulated attic space into large living space.
Переглядів 112 тис.Рік тому
This project was only $2200 in materials and tool rentals to add 180 sf of living space. Adding lumber to turn trusses into joists and rafters. Adding electrical and hvac dusting to new space. Adding subfloor and drywall. Adding wafer lights and custom closet organization. A big thanks to The Closet Doctor, 530-450-5353, located in Loomis Ca, the greater Sacramento area. Check out their channel...
How to install an attic gable fan. QuietCool AFG SMT ES 3.0
Переглядів 62 тис.Рік тому
This gable fan has been well worth the money and effort. I’ve tested it on multiple consecutive days of consistent temperatures. It keeps my attic approximately 8-12 degrees cooler in the summer, which in turn keeps the house cooler. Comment if you have any questions. The AFG SMT ES 3.0 is the more energy efficient, speed model. amzn.to/3KtXMWW The AFG SMT Pro 3.0 is the same but a less energy ...
2022 F150 Lightning Lariat speaker upgrade from basic B&O to Alpine R series.
Переглядів 11 тис.Рік тому
2022 F150 Lightning Lariat speaker upgrade from basic B&O to Alpine R series.
ROC SUP CO. Inflatable Paddle Board 1 year review. Vachan Pump review. Slab Creek Reservoir review.
Переглядів 17 тис.Рік тому
ROC SUP CO. Inflatable Paddle Board 1 year review. Vachan Pump review. Slab Creek Reservoir review.
Painting a bathtub with Rust-Oleum Tub and Tile
Переглядів 155 тис.Рік тому
Painting a bathtub with Rust-Oleum Tub and Tile
F150 Lightning Tire Pressure Monitor System TPMS reset
Переглядів 16 тис.Рік тому
F150 Lightning Tire Pressure Monitor System TPMS reset
Converting a gas powered mini bike to electric
Переглядів 39 тис.Рік тому
Converting a gas powered mini bike to electric
F150 Lightning Emergency Frunk button tests
Переглядів 1,1 тис.Рік тому
F150 Lightning Emergency Frunk button tests
Rivian Wall Charger Installation. R1T. R1S
Переглядів 17 тис.Рік тому
Rivian Wall Charger Installation. R1T. R1S
F150 Lightning Charge Station Pro unboxing and connection
Переглядів 6 тис.Рік тому
F150 Lightning Charge Station Pro unboxing and connection
F150 Lightning power off while driving test
Переглядів 639Рік тому
F150 Lightning power off while driving test
F150 Lightning Blue Cruise tests with eyes closed
Переглядів 1,5 тис.Рік тому
F150 Lightning Blue Cruise tests with eyes closed
F150 Lightning Back Up Speaker disconnect (for replacement)
Переглядів 2,6 тис.Рік тому
F150 Lightning Back Up Speaker disconnect (for replacement)
Thank you!!!!!
What's the size of your floor joists and how far do they span?
I don’t recall exactly. I used a local building chart and then went up one size for the span and load.
Was looking for replacements for my B&O System. Coming from a BMW with a B&O System this one lacks bass and distorts at higher volume levels. This is exactly what i was looking for 💪🏽
Now go buy more stuffs 😂
What is the texture like?
It’s fairly smooth depending on how you apply it. It self levels pretty good.
Do you absolutely have to bring the motor up off the frame even if you run a smaller rear sprocket?
Even if you get the my1020 kunray with the brackets attached to the motor, think it would work without bringing it up?
The chain would still hit the frame. The sprockets don’t make a big enough difference.
@@m10stuff so definitely go with a motor mount riser or build one out of angle?
So no sanding ? Or curing
Yes. I sanded it first and it took a few days to cure.
Good work, the only comment I can think of is that with hot glue in the A pillar, depending on the geographic location, it may continuously soften over time, reharden and become brittle eventually.
Valid concern. I’ve had a stick melt in my tool box in the frunk
Nice job 👏 bro 😊
You opened my eyes 👀 how things can be done thank you!
I'm so disappointed in you for using that Ryobi tool. Anyone knows if you get caught using one of those, you should just turn in your man card now. Meanwhile, i'm over here using my favorite Rigid tools.
At first I didn’t look at who was commenting. I’m disappointed in myself btw
Hi i know the factory rear speakers sound rubbish did it made a diffrence after the replacment ty
Honestly it’s a big difference. I can turn it way up and there’s no distortion.
Can u spray that too?
It’s not recommended but I think you could. But good luck cleaning the spray equipment. This stuff is nasty.
For the life of me I can't pull that thing off, I've tried squeezing the sides, top and bottom, nothing. Is there something that needs to be pressed to release it? Help 😨
Mine pops off super easy. I just did it to verify. Try pushing it all the way in and then squeezing the release button all the way before starting to pull it off.
Thank you, actually that worked! However, the bad news is I instantly got a warning alert and the backup camera stopped working... Go figure. Had to put it back on. Hoping to find a Plan B now.
Correct. Somebody makes a device that plugs into the connector to avoid the error reading. www.megaohmmotorsports.com/product/ford-psbk-ece
@@m10stuff That's great, thanks for the help. I ordered it and it's coming next week.
That controller should have a program wire to change direction, two single white wires that connect together for this purpose.
If so I couldn’t figure it out.
Thanx for this video I have an older home as well built in the 60s or 70s and have the same fan in guest bathroom... thanx for the help..
You’re welcome
Great! Now you can ride for 40 minutes and recharge over a 5 - 6 hours. All of the low price of around $2,000 if you don't have any of these parts. Man this bike is slow with a 48v. You really need a 72v to get any real speed.... and that battery alone will cost you $1500. The price of a brand new 250cc Hawk dual sport motorcycle.
For starters you’re way off on your pricing. I have risen this thing for hours without charging. In addition, I didn’t build it for speed. It’s a perfect setup for a kid and fun around the neighborhood trails.
I have a 2023 F-150 Lariat with the B&O system. Would these also fit in mine and be a good upgrade?
Yes. They are the same
Amazon $71 CAD, Home Depot $99 CAD
How long does it take to dry?
1 hour to touch/recoat. 3 days to water exposure
Clear pipe 😮
That way you can see the 💩 flowing
YOU DID AN AMAZING JOB 👏
Thank you
NEW SUBSCRIBER ⭐️⭐️⭐️⭐️⭐️
EXCELLENT work on that. i mean seriously.
Thank you
Will this fit single cab ?
I’m not completely sure. You’ll have to look up the specs for your model.
A huge shout out to Mike ,I had a leaky refrigerator and he was able to come over and get the parts and fix it! he’s always willing to help people and is very professional. We so appreciate all your help.
Thank you to fix the refrigerator Mike you’re the best, my buddy
Thank you! Im excited to try this as soon as it arrives on our Avacodo green shower!!
You're electrical diagnostics are explained incorrectly. If the element is good, you will have continuous AC voltage through the heater/ignitor and both wires. Having AC in only one of two wires indicates the element is failed in an "open" state. That means it is not allowing current go through the heater coil. That is why the neutral wire does not indicate voltage present.
Fair enough. I’m not sure I follow the difference but either way it’s the same result.
Differently informative..thank you
Thank you!! Aha ran into some trouble changing locks today thank goodness I found this video 🙌🏾
We would like this setup in our place in Bay area. Do you work in east bay as well? Please send us your contact if you are interested in helping us.
Thanks for asking. Unfortunately, I’m booked out 6 months with local work and don’t leave the area.
@@m10stuff which area are you in? I dont need my work done until next year.
@@hersheyfication northern California
I believe this installation and cost of the product (to be kind ) is somewhat a waste of money. In this particular application, the fan will pull air directly from the left side vent. Air always pulls from the least resistance. I doubt if little or any air will be pulled from the north end. It is the same science applied to why you don’t combine ridge vents with gable vents. Please don’t misunderstand, I think ridge vents are great when used in the proper application
If you have a similar situation all you’d have to do is block a vent.
Brought to you by Rupe Goldberg Plumbing.
I had to google that one lol
"Hey, Martha. I just figured out how we can fix that drain" LOL
If a non construction worker did that, I'm impressed.
Dont ever do this.
Mint
The vent under my kitchen sink just has one of those dish washer wastewater Ts horizontally behind the p trap with where the dishwasher would be facing up and a rubber hose connected to it and run down alongside the drain pipe under the trailer. It's on an island and originally it had no vent and the pipe wasnt even glued so it was dumping dishwater under the trailer. Didn't bother getting one of the fancy check valve style vents that doesn't need a pipe because it's a trailer.
True genius! Haha
Can it be used on wall tiles?
For sure
This was an incredible video!! You do a great job at capturing the experience and little stuff that needs explaining when it comes to a project like this! I am just about to use this exact product with the exact tools!
You almost had me at the end that it was code😂 😂😂😂
I feel your pain sir. Good work 👍
I once found a fernco tee buried in a backyard, the owner needed to drain his above ground pool often
Are you using the factory B&O amp or did you put a A2B interface in?
We used the existing factory equipment. This was just a speaker swap
@@m10stuff Nice, I'm thinking about the doing the same with my edge. Speakers were louder than factory?
@@jared4265not just louder, but much clearer
Thanks Saved my ass a couple hundred bucks just watching this I bought the replacement pet directly from manufacturer tho so it was like 118$ after tax Should last a few years …
Good info. Thanks
I covered my nose and I am at home lol
When can i get some M-10 merch?
Gotta be an employee for free shirts
Wow , unbelievable that this isnt a toggle in the infotainment system
5:20 The rear tire is super low on air
Thanks. We put some air in since then