- 1
- 1 326
AllAboutCampers
United Kingdom
Приєднався 18 вер 2013
Repairing and maintaining my 1988 motorhome with endless mechanical, electric and damp issues.
How to Fix a Renogy 170ah Lifepo4 Battery
This video walks you through adding a balancer and top balancing the cells. This should sort out these batteries and make them work again!
0:00 Intro
0:56 Opening the Case
5:10 Checking the state of the Cells before charging
6:13 Top Balancing using a Benchtop Power Supply
10:29 Lifepo4 Cells and they're relationship between voltage and SOC
12:24 Installing the Balancer and Switch
20:02 Powering up the balancer and checking it's working
21:50 Finishing the Top Balancing with the balancer and power supply
23:55 Result of balancing and top balancing
25:26 Refitting the case and screwing it closed
26:33 Conclusion
High Temperature Battery Tape: www.amazon.co.uk/dp/B0BVFHZQYP?psc=1&ref=ppx_yo2ov_dt_b_product_details
5.5a BMS 4s Active Balancer Board with protective case
www.amazon.co.uk/dp/B0CKHCGSNT?psc=1&ref=ppx_yo2ov_dt_b_product_details
DPDT Latching Switch
www.amazon.co.uk/dp/B09Z61114Y?psc=1&ref=ppx_yo2ov_dt_b_product_details
5a 30v Benchtop Power supply
www.amazon.co.uk/dp/B0BTDH41YH?psc=1&ref=ppx_yo2ov_dt_b_product_details
22awg single core wire
www.ebay.co.uk/itm/145085844929?var=444283791018
Crimp Terminals
www.amazon.co.uk/Taiss-Connector-Assortment-Insulating-Electrical/dp/B0BYZ4FQFB/ref=sr_1_2_sspa?
Heat Shrink Tubing
www.amazon.co.uk/Eventronic-ET1002-Shrink-Electric-Insulation/dp/B071D7LJ31/ref=sr_1_5
Self Tapping Metal Screws
www.amazon.co.uk/FandWay-Drilling-Phillips-Self-Tapping-Windows/dp/B09MH5MKWL/ref=sr_1_6?th=1
0:00 Intro
0:56 Opening the Case
5:10 Checking the state of the Cells before charging
6:13 Top Balancing using a Benchtop Power Supply
10:29 Lifepo4 Cells and they're relationship between voltage and SOC
12:24 Installing the Balancer and Switch
20:02 Powering up the balancer and checking it's working
21:50 Finishing the Top Balancing with the balancer and power supply
23:55 Result of balancing and top balancing
25:26 Refitting the case and screwing it closed
26:33 Conclusion
High Temperature Battery Tape: www.amazon.co.uk/dp/B0BVFHZQYP?psc=1&ref=ppx_yo2ov_dt_b_product_details
5.5a BMS 4s Active Balancer Board with protective case
www.amazon.co.uk/dp/B0CKHCGSNT?psc=1&ref=ppx_yo2ov_dt_b_product_details
DPDT Latching Switch
www.amazon.co.uk/dp/B09Z61114Y?psc=1&ref=ppx_yo2ov_dt_b_product_details
5a 30v Benchtop Power supply
www.amazon.co.uk/dp/B0BTDH41YH?psc=1&ref=ppx_yo2ov_dt_b_product_details
22awg single core wire
www.ebay.co.uk/itm/145085844929?var=444283791018
Crimp Terminals
www.amazon.co.uk/Taiss-Connector-Assortment-Insulating-Electrical/dp/B0BYZ4FQFB/ref=sr_1_2_sspa?
Heat Shrink Tubing
www.amazon.co.uk/Eventronic-ET1002-Shrink-Electric-Insulation/dp/B071D7LJ31/ref=sr_1_5
Self Tapping Metal Screws
www.amazon.co.uk/FandWay-Drilling-Phillips-Self-Tapping-Windows/dp/B09MH5MKWL/ref=sr_1_6?th=1
Переглядів: 1 331
I had to stop watching when you did such a horrible job stripping and soldering onto the board. Why on earth do people do such a sloppy job then show others "How" to do it?
Well here we go again. Bought a 230ah Li Time ‘low temp protection’ batt and just finished trying to bench top charge to 14.59 at 10amps. Went all day and shut down. Remove charge and get 13.13 at the battery… These batts are all shipped imbalanced!
Sorry forgot to ask , the 2 white wires coming up from cell one and soldered to the bms, any ideas of function?
You might be referring to the temp sensor. There are two, one on the cells and another near the connection points
@Allaboutcampers123 Hi I did contact you earlier but it didn't send for some reason. Agree on closer inspection the pcb under the cover has a connection that says 85 degrees. Any more videos planned. Excellent job
Brilliant video. I have 2 of these and managed to short them killing the bms. Having tried all the tricks to wake the battery's up , no joy new JK-B2A8S20P bms partially installed. I have followed a couple of other UA-cam videos on installing and need some advice as all these are on blocks of cells and not an enclosed battery. My problem is after following the set ups shown i have no power to the bms and no Bluetooth connection so something must be wired incorrectly. I take it from your narration you hinted you have replaced a bms? The new bms has a 9 wired connection block , the black wire i have connected to the yellow comming up from the 4 b- connectors. 1st balance red to the white in the middle nearest cell 1, 2nd red to cell 2 which is the yellow wire to the right of cell 1, 3rd red to white wire in centre of battery and finally red 4 to yellow on the left of that cell 4. Red wires 5-8 not used. Red 9 I have tried same connection as red 4 and also directly to positive post. On testing i have 13.4v at B- and pos terminal, P- to positive post 13.2v . Any ideas please and yes i managed to crack the lip of the casing😂
I do remember the jk bms has the connection block wiring in the reverse order. So you may have wired them backwards. Do you have voltage in the cells? If so you should be able to revive it.
Thanks for the reply. Got the proper switch and now working although can only get cells to charge to 3.21v. Awaiting arrival of bench power supply and will follow your section from video on that. Any ideas what the 2 white wires coming from cell 1 to the cpcb do? Again many thanks
Thanks, took photo and enlarged it of block connector and it does have 85 degree marker . Sorted thanks. More videos coming ?
Thanks so much for this, I have just bought 2x of them.. it will be a horrific feeling hacking into them before I have even used them, but better that than damage the cells with poor balance on the first charge! Mine will be under the van, so I will have to seal them with silicone when putting them back together! I will run the balancer switch into the van, so I can access it. I will also run a balance lead out of the pack into the van so I can actually monitor the cells when needed. I fly RC planes, and in the RC hobby, with mostly lithium batteries being used, we have little things you can plug into a balance lead to quickly read the voltage of each cell and the total voltage.
That's a great idea to have the balancer switch and cell voltages on a remote loom! I feel your pain opening a new battery, but I don't regret it at all, they have been perfect since doing this. Good Luck!
@@meerkatfilmsuk I really appreciate your effort in making the video, it is a fantastic resource for the rest of us! Thank you!
Sadly a little late for that! I think the on/off switch might be a giveaway... that and the fact that's its nicely balanced now...
Sadly a little late for that! I think the on/off switch might be a giveaway... that and the fact that's its nicely balanced now...
This is amazing! Thank you for this. My 5 month old exact battery won’t show higher that 13.29 volts after sitting for days and days on small ac powered automatic lip04 charger. Do you have a recommendation on a bench top power supply?
You may have the same problem, I think it's common on these lifepo4 batteries. I have the cheapest amazon 5amp benchtop. I would recommend getting a better one, with 10amps and 2 decimal places for voltage. So you can be more precise. Good luck with the repair!
Finished the mod last night. The balancer has done an excellent job! Just a quick question, is there any issue with the balancer being on when the battery is back in the truck camper system while hooked up to the solar charge controller and the inverter charger?
Also, what hoops did you have jump thru to get renogy to send you a new one?
There's no problem with the balancer being on while the battery is being charged from solar. I generally switch my balancer off and only stick it on from time to time but I know some people have it active all the time and I don't think it causes any issues.@@Kehoe-ge4iq
they made me make a video showing it not charging properly, obviously you'd need to do this before modding it!@@Kehoe-ge4iq