Відео

Mahindra tractors leak, get used to it.

My 5555 loader control valve is leaking from the centering spring cylinders underneath the valve. The parts diagram doesn't show any repair parts for the valve so it's disposable junk unit.

What type of brake pads need for fieabor scooter

Why use BOTH..? Teflon tape and dope are both for sealing the threads… Use one or the other. I personally use white Teflon tape on anything 3/4” or less…and dope for anything bigger… Shouldn’t have any problems this way. Using both could cause the liquid of the dope to make the tape bunch up and pull away from the pipe…

Thank you for making these videos! Great help! I gotta do mine in 20°F next weekend. Wish me luck!😅

be easy if you break the white backup ring they are as scarce as rooster eggs

My screen is total black and have tried other videos to fix it but not yet. Might have to go to the dealership.

Thank you

Spray hangers with lube if you have a next time. Relieves rubber to metal rod friction. Not necessary to undo fwd hangar, just makes install easier. Thx for video!

That was painful to watch, should’ve been titled.,”How not to remove a spud”. You ever hear the saying, work smarter,not harder.

Does anyone know if the valves are adjustable on a 7.4L TBI engine for a 95 GMC2500 suburban?

My back wheel sensor rusted and everything around it. What can I do? The shop is a afraid to take it apart thing might break and it would open up more problems. What can I do?

Hey what gas cap do you have?

Cant believe you got on the highway with this, i would never take mine

Do you need both chargers to charge this scooter and do anyone no where I can purchase these chargers please

Running 5w is why it leaks! Do the research, that's why they don't recommend it!

Is this a weather report or a scooter fix?

Same story with my GMC, I assumed the oil was from the steering box..... it's from the oil cooler line.

Just a little more BANG BANG BANG BANG BANG lol

You did good buddy. I know the feeling it just has to be difficult for you. How about God is going to help me do this. The wishbone would not let loose. Making i me crazy. I had to beat on the top of the assembly where it bolts into the shock. Then I had to grind the edge where I hammered because the metal deformed in the way of getting it back in. It should not be that hard and a puller would not fit in there. We sure know how to have fun.

You didn't show the most important part...putting the hitch on the car. Seems like the hardware that goes through the subframe will easily get pushed back into the subframe and cause much anguish. Also if you spray the rubber muffler hangers with wd-40 they'll slip off a lot easier.

thanks ill try it sat

I gotta give credit were it's due, your video was very useful.. thanks dude

For folks in this situation. All you need to do is get a good Sawzall blade and put a notch in the spud. How do I explain this,,,,, --- basically you run the blade, tip of the blade will be facing INTO that hole in the radiator where the spud lives. You then cut thru the brass spud JUST until you get thru the spud and to the point of the cast iron threads, then STOP... Make a few cuts like this and then take a cold chisel and split the spud. It will fall right out. MOST plumbers dont even put a wrench on the spud. They just cut it and split it then remove it.

😂😂😂thanks had a food laugh

You're in the Winter Wonderland!

haha not made for the snow! get some chains on that thing...

Around snow your crazy

Even though it pushed the tape out I bet it was still sealed. I've been using blue monster for years with pipe dope. Everything water I use both. Even with bad threads I almost never have leaks using both

Arent you concerned about smashing the customers floor?

On my driver side SX4 I bought 3 different CV axles from manual to automatic they are all to long what am I doing wrong

Happy Trails! I've had the YUME version of your scooter and recently moved up to the next version with the Sine wave controller. Very cool toys! If there's anyway you can add a steering damper to yours, do it. The handling is 100% better on the road at higher speeds. Not as shaky or scary. Also avoid water unless you open up the battery container and REALLY waterproof it. I ended up eating two motor controllers because moisture got in there and melted the cheap chinese soldering job they did. If I had stayed out of puddles and rain, they would have lasted forever. All the best!

Good to see you. Nice property. Looking good.

just replaced mine now the control arm wont tighten enough to keep the wheel from floating

I did Swift fz a little different. Wheel speed sensor came out easy. Removed the rotor just to make things easier. Undid Hub attached to strut only , 2 bolts only.. that hub then flops, and the axle comes out from hub. Yep, i found they pulled apart,suzuki inner cv's pull apart easy, annoyed me with two stuck ends.. yeah the transmission drips out from the axle hole for the one that goes into the transmission..

Hmmm I think I know what might have gone wrong, it appears all the expensive tapes in $4/unit including blue (actually it's cheaper than HF 10 rolls lol) do not bunch up easily but they also don't stick easily either. Later is what I think you've experienced with. Since you're doping, just 3 wrap is good enough. This thing is too beasty, you don't need to go 5x rounds. Try this, (1) put on a small dope just a real tiny drop, the purpose here is to encourage tape to stick and stay (2) wrap 3 round CW make sure it's tight if they move around it's no good #2 didn't do the trick then finally (3) dope again like you just did here.

What size engine was this sx4?

u joints are prob gone i replaced my driveshaft 3 years ago

With that dust you can clearly see the gaps you should take it apart and add more magents in the gaps.

Thank you for this video. I just purchased the very same boiler which is going to have to be split and brought to the basement 1 section at a time. So Hydro-testing after the sections are reassembled is an absolute must!! I prefer not to do it this way but I have no choice.

how can I unlock the maximum speed of this model. Thank you

I have a problem with Rear motor i Replace hall sensor but when i give throttle it makes a beeping noise and dont spin any advise?

Nice video !

There are times of videos on how to kick start a motorcycle. You don't just sit on it and pump the kickstarter back and forth, You have to find top dead center or compression stroke. This guy sitting here kicking this bike over is the number one mistake. Find your compression stroke people

Music took away from the video

You sir gave no secret to anything.. stop trying to trick people

how did it happen in the first place?

Is this AWD?

I change my oil pump on my 454 and still no oil pressure?? what could it be?

That bolt at 11:30 is stuck for me, what can I do?