Zach Aldrich
Zach Aldrich
  • 25
  • 14 520

Відео

STACK ST200 Clubman Tachometer install into my 1982 Alfa Romeo GTV6
Переглядів 1302 місяці тому
My GTV6 tachometer had the warped needle of doom that is often an issue with these old gauges. The needle melts into a crescent shape and drags on the gauge face. I tried to fix mine and failed miserably so I decided an upgrade was needed. This is my install of the STACK ST200. It’s quartz, very high quality and bomb proof. I highly recommend it! (I am not affiliated with stack and paid for thi...
DRIVEN: The twisted sisters, Texas, with the violin of Arese. 1982 Alfa Romeo GTV6 FULL VERSION
Переглядів 3922 місяці тому
Come with me on this drive thru the twisted sisters in Texas. Volume up and enjoy!
Tejas Turismo road trip 2023
Переглядів 763 місяці тому
Forgive the poor video edits. Didn’t take much for video during this event and this is what I ended up with.
1954 Oldsmobile “Rocket” 88 holiday coupe ex Mille Miglia race car.
Переглядів 3523 місяці тому
Luca and I go over this Oldsmobile rally car that has raced 3 times in the Mille Miglia and once in the Colorado Grand. My street is closed currently so we took it for a short slow drive down to the school turn around. I will be prepping this for the Florida Mille Miglia experience this upcoming February for my friend (and owner if the car). Enjoy!
Fall drive with my 1982 Alfa Romeo GTV6 2.5
Переглядів 6154 місяці тому
The car had an intermittent miss during this drive. Found out a loose wire to one of the injectors was causing the issues. Still fun though and was easy to fix after the fact.
Starter troubles. Replacing the starter in my 1982 Alfa Romeo GTV6
Переглядів 934 місяці тому
At the end of the track day at Road America, my starter decided to give up the ghost. We had to push it onto the trailer. After I got it back in the shop this was what I found…
Quick run thru the revs. 1982 Alfa Romeo GTV6. Equal length exhaust from Extreme Tuning BG
Переглядів 8205 місяців тому
Quick run thru the revs. 1982 Alfa Romeo GTV6. Equal length exhaust from Extreme Tuning BG
A short drive. 1982 Alfa Romeo #GTV6. #Busso. Equal length exhaust. Need I say more?
Переглядів 3 тис.7 місяців тому
1982 Alfa Romeo GTV6 2.5 with exhaust from extremetuningbg.com
Road America, Session 3 with my 1982 Alfa Romeo GTV6 2.5
Переглядів 4989 місяців тому
Last session of the day and also the most dry. Was having some serious brake pulsation and still unable to use 2nd gear at this time without grinding. Still, I did my best and had fun!
Road America, Session 2 (dry-ish). 1982 Alfa Romeo GTV6
Переглядів 8209 місяців тому
Session two around lunch time. Getting used to the car in the dry. The standard tires and brakes definitely showed their lack of performance quickly into the session. Things to work on for the next time
Road America! Morning Novice First Session (wet) ~40* F in my 1982 Alfa Romeo GTV6 2.5
Переглядів 2949 місяців тому
Road America! First session of the day was a wet one. I treated this more as a test and tune day to stretch the Alfa’s legs.
Shocks, bushings and more! Working on my 1982 Alfa Romeo GTV6
Переглядів 1989 місяців тому
In this video I replace the rear shocks and the bushings for the Watt’s link.
I finally drive the GTV6! First impressions and going to a car wash.
Переглядів 2,4 тис.9 місяців тому
In this video, I take finally take the Alfa out on the road! I give some quick impressions and then later, a night drive to get a car wash.
Hella Headlight install on my 1982 Alfa Romeo GTV6
Переглядів 919 місяців тому
In this video, Luca tries to drive the Alfa. I install the cable for the air flow bypass valve and install new headlights. At the end, there’s some exhaust sounds!
Replacing Fuel Injectors and more! 1982 Alfa Romeo GTV6
Переглядів 2699 місяців тому
Replacing Fuel Injectors and more! 1982 Alfa Romeo GTV6
I try to start it! Finishing up the coolant lines and check for leaks on my 1982 Alfa Romeo GTV6
Переглядів 1189 місяців тому
I try to start it! Finishing up the coolant lines and check for leaks on my 1982 Alfa Romeo GTV6
I spill coolant everywhere! Changing the coolant hoses on my 1982 Alfa Romeo GTV6!
Переглядів 1209 місяців тому
I spill coolant everywhere! Changing the coolant hoses on my 1982 Alfa Romeo GTV6!
1982 Alfa Romeo GTV6 Fuel Pump replacement (and more).
Переглядів 2809 місяців тому
1982 Alfa Romeo GTV6 Fuel Pump replacement (and more).
Suckers! I install vacuum lines and more! 1982 Alfa Romeo GTV6 (Exhaust sound teaser at the end)
Переглядів 509 місяців тому
Suckers! I install vacuum lines and more! 1982 Alfa Romeo GTV6 (Exhaust sound teaser at the end)
Extending the wire for the oxygen sensor on my 1982 Alfa Romeo GTV6 2.5.
Переглядів 349 місяців тому
Extending the wire for the oxygen sensor on my 1982 Alfa Romeo GTV6 2.5.
1982 Alfa Romeo GTV6 exhaust wrap up from Extreme Tuning BG
Переглядів 9559 місяців тому
1982 Alfa Romeo GTV6 exhaust wrap up from Extreme Tuning BG
1982 Alfa Romeo GTV6 2.5 passenger header install.
Переглядів 959 місяців тому
1982 Alfa Romeo GTV6 2.5 passenger header install.
1982 Alfa Romeo GTV6 Oil dipstick dilemma!
Переглядів 859 місяців тому
1982 Alfa Romeo GTV6 Oil dipstick dilemma!
Hello, my name is Zach.
Переглядів 769 місяців тому
Hello, my name is Zach.

КОМЕНТАРІ

  • @matty_lam_937
    @matty_lam_937 7 днів тому

    That really is a tremendous sounding GTV6 🍀 🫡

  • @35140giuseppe
    @35140giuseppe Місяць тому

    have you installed any LEDs for the gauges?

  • @davidsherrick898
    @davidsherrick898 Місяць тому

    I have a 1988 Alfa Romeo Milano Gold Automatic. Straight exhaust. The Busso 2.5V6 sounds wonderful!

  • @ralphbillick1210
    @ralphbillick1210 Місяць тому

    Fantomworks car , glad to see that it is still on the road. ❗️🇺🇸

  • @ClassicChrome86
    @ClassicChrome86 Місяць тому

    Thanks for the ride along! Enjoyed the video!

  • @michaelfisher7170
    @michaelfisher7170 Місяць тому

    Had a ‘55 Olds 98 Holiday 40 years ago. Great fun driving that boat around town. Miss that car.

  • @billtodd6509
    @billtodd6509 Місяць тому

    Wasn't that car featured on FantomWorksTv some time ago getting prepared for that overseas race by a couple good friends?

    • @mydogsareannoying
      @mydogsareannoying Місяць тому

      100% and it’s gonna go back to Italy with a couple of new friends behind the wheel!

  • @jackiealdrich3079
    @jackiealdrich3079 Місяць тому

    Great job love the music!

  • @155stw
    @155stw 2 місяці тому

    You should use a 164 starter because it’s lighter and more compact. All it needs are a an adapter which I have a template for.

    • @mydogsareannoying
      @mydogsareannoying 2 місяці тому

      Hopefully I wont need to worry about it anymore but if I do I will look into that. Thanks for the tip!

  • @155stw
    @155stw 2 місяці тому

    In your video thumbnail you have a photo of a non-stock starter. Did you use that?

    • @mydogsareannoying
      @mydogsareannoying 2 місяці тому

      It ended up not working with my exhaust unfortunately. I ended up taking my original starter out and getting it refreshed.

  • @155stw
    @155stw 2 місяці тому

    Is this from extreme tuning in Bulgaria?

  • @grantsutherland6798
    @grantsutherland6798 2 місяці тому

    I reckon a carbon-epoxy driveshaft would reduce the rotational inertia that makes gear-changing difficult and wears out the synchros too. I saw where someone changed it out, removed the mid mount and reconfigured the gear change linkage. Nice sound though.

    • @mydogsareannoying
      @mydogsareannoying 2 місяці тому

      Yeah I have been looking for this solution. Seems the best route is to go to straight cut gears when I eventually rebuild the trans.

    • @grantsutherland6798
      @grantsutherland6798 2 місяці тому

      @@mydogsareannoying possibly, but when meshing between engine shaft and gearbox primary, in a car with no driveshaft between engine and gearbox, when the load comes off there is very little rotational energy involved that must decay. The theory of reducing rotational inertia (based on mass and radius), should be to reduce the diameter and the mass so that the major contributor to rotational inertia is drastically reduced. This is IMO, your first port of call

    • @mydogsareannoying
      @mydogsareannoying 2 місяці тому

      @@grantsutherland6798yeah, two flywheels a clutch assembly and a heavy driveshaft are not ideal

    • @tigerpjm
      @tigerpjm 2 місяці тому

      IT was designed that way so flat changing doesn't destroy your box. But driving normally does. It's very Italian!

  • @DominickMarino
    @DominickMarino 3 місяці тому

    Such a good sounding car!

  • @ultimatee30kara3
    @ultimatee30kara3 3 місяці тому

    Simply beautiful 🏁

  • @louloufildezinc9041
    @louloufildezinc9041 3 місяці тому

    Fabuleuse vidéo qui rend hommage à cette sonorité merveilleuse que nous avions régulièrement la chance de croiser dans les années 80-90. Merci pour ce travail de rendu, c'était ça l'ambiance du GTV6.

  • @a2b3c
    @a2b3c 3 місяці тому

    back in the days, like maybe 1998 i had one aswell but i crashed it in a slippery corners (leaves in the rain on the street) i still kinda miss it.. my dream would be a GTV6 with an GTA 3.2 Engine 😊

  • @minutepapillon5060
    @minutepapillon5060 4 місяці тому

    Un seul commentaire pour cette oeuvre d'art ..😞

  • @Haffschlappe
    @Haffschlappe 4 місяці тому

    Sadly according to Schlaboubve laws in EU all Gas cars will be illegal from 2027 on!

  • @665Thunder
    @665Thunder 4 місяці тому

    best sounding engine ever

    • @Haffschlappe
      @Haffschlappe 4 місяці тому

      Lamborghini Urraco V8 sounds better and is 100 HP stronger

  • @pureroadster59
    @pureroadster59 4 місяці тому

    Fantastic! Is the microphone in the car? What exhaust setup do you have? thanks

    • @mydogsareannoying
      @mydogsareannoying 4 місяці тому

      Yeah standard iphone 14 microphone. The exhaust I had made from extreme tuning bg.

    • @pureroadster59
      @pureroadster59 4 місяці тому

      @@mydogsareannoying sounds so good! Does it have cats and center resonators?

    • @mydogsareannoying
      @mydogsareannoying 4 місяці тому

      @@pureroadster59just a muffler. Its an equal length header on each bank going 2 into 1 on the muffler. Side exit out the passenger side. I have a video on it I posted awhile back. Go check it out!

    • @pureroadster59
      @pureroadster59 4 місяці тому

      @@mydogsareannoying thanks mate I will!

  • @supersonic4863
    @supersonic4863 5 місяців тому

    bro made all that noise to not even catch up to the mom driving her son to soccer practice

    • @demonwind424
      @demonwind424 5 місяців тому

      don’t know why you would want to tailgate while doing a 40 roll

    • @peperamoncho6286
      @peperamoncho6286 5 місяців тому

      The car sounds incredible no matter how fast it is.

    • @mydogsareannoying
      @mydogsareannoying 5 місяців тому

      Car is real slow. Just in it for the noises! :)

  • @gerhard6105
    @gerhard6105 5 місяців тому

    Very nice. The original exhaust sound always reminds me of a trumpet orchestra howl 👍. One tip: for your own safety aginst a whiplzash, turn up your head rest. I have such a car for 30 years already and most spare parts triple. I took it apart for a restauration. The second model (1984-1987) has better seats that support better under the knees. Always keep such cars original. Regards from a 🇳🇱 living in 🇧🇪

  • @PwnUIDo
    @PwnUIDo 5 місяців тому

    Heavenly 🎶

  • @alfavulcan4518
    @alfavulcan4518 5 місяців тому

    My Shankle headers flange was split for that reason but the tubing went straight down. Original location is a bit of a pain anyway

  • @alfavulcan4518
    @alfavulcan4518 5 місяців тому

    Beautiful sound, one of the best GTV6’s I’ve heard and I’ve been around a lot of them including my present 81. Good job!

  • @PwnUIDo
    @PwnUIDo 6 місяців тому

    Standard or Beck? Replacing mine this weekend, original cleaning didn’t hold up.

    • @mydogsareannoying
      @mydogsareannoying 5 місяців тому

      I would go with the best you can get due to the labor involved. They’re not too expensive either way and the labor really isn’t that bad so whatever works!

  • @p.-1976
    @p.-1976 6 місяців тому

    The sound of the GTV6 is just insane, pure melody.

    • @Haffschlappe
      @Haffschlappe 4 місяці тому

      They are too slow put a Turbo kit on it

    • @marcoles2987
      @marcoles2987 3 місяці тому

      @@Haffschlappe nhaaaaaa

  • @MarioMariano-qr6ze
    @MarioMariano-qr6ze 9 місяців тому

    hi, Im thinking about buying a gtv6, and I see that you are actually scratching the ceiling with your head in it:) how high are you? Is it ok when you have a helmet on?

    • @mydogsareannoying
      @mydogsareannoying 9 місяців тому

      I am 6’ but I have a long torso. This is my issue in most cars I have driven.

    • @timsbike4887
      @timsbike4887 3 місяці тому

      im 6'2" and helmet is just ok. Quick seat change for the track is easy if you need to go lower.

  • @RoxanneWilson-xc6oq
    @RoxanneWilson-xc6oq 9 місяців тому

    Awesome. Wish I was there as your Assistant. Love the car

  • @jackiealdrich3079
    @jackiealdrich3079 9 місяців тому

    U are so smart great job

  • @altehaubitze1461
    @altehaubitze1461 9 місяців тому

    Kannst du mir mal deinen Händler nennen von dem du deine Ersatzteile beziehst?

    • @mydogsareannoying
      @mydogsareannoying 9 місяців тому

      The hose kits were from hpsimotorsports.com. I get hard to find used stuff from Alfa parts exchange in Sacramento. And centerline, rockauto, or any other internet based source I can find. Everyone I’ve talked to along the way has been extremely kind and helpful. You couldn’t ask for a better community than the Alfa one.

    • @davidsherrick898
      @davidsherrick898 3 місяці тому

      Hi, I have an 1988 Alfa Romeo Milano Automatic! And the fuel pump is dead! The car starts with spraying fuel into the injection system. Do you think that the pump is in the same place since the GTV6 is similar? I'm not spending thousands on it, since my car is in rough paint condition.