Відео

This is the worst greenhouse ever, bought it for summer and summer is nearly over with how long it’s taken to build this piece of crap, halls don’t help you either customer service is rude

Thank you, Halls, for this greenhouse foundation pre video.

I have never in my life tackled such a frustrating project due to extremely poor instructions. The instruction pamphlet is clearly a photo copy of a photo copy and has caused us to disassemble parts several times to put in parts which weren’t explained properly. I could go on about this poorly thought out product but suffice to say, if you want to protect your mental health then DO NOT BUY this product, it is impossible to assemble going by the instructions. William

Thanks, very useful. I got the vents assembled wrongly using the instructions. Then I watched your video, and reassembled them correctly.

The sides and roof beam on mine are up. They were easy. It took me several hours to do the door, the instructions are very unclear, the fitting was very tricky. Easy when you know how, hard otherwise. Shame you missed the door assembly and fitting out.

The video is very useful, but seems to have been done with the assumption that you have assembled these before and this is simply an aid memoir. It would have been more helpful to have close up shots of the corners and also missing is fitting the door hanger

I bought mine 8 years ago, it is still in perfect order.

The instructions from Halls are useless it is ridiculous when you think how much they charge for their green houses it's a photocopy of a photo copy and nothing more than 18 pages of smudge there are plenty of alternative Greenhouses out there who provide accurate instruction for assembly my advice is buy one of them !

MORE VOLUME REQUIRED

Pretty useless, all the difficult things you need help with are missed out, yet this is the video Halls suggested. Terrible assembly instructions

Today I have been constructing the panels of my Popular 8' x 6' - in the house!! Its very cold, wet & windy outside. The printed instruction manual that came with the frame is totally useless. The video above - helps but still skips over major pointers, like which way round to have certain pieces. I resorted to Halls online chat this morning, but that ended with the assistant telling me to look on UA-cam! Its been an arduous task, however a call to helpline this afternoon, proved very helpful - thank you Rachel. I was directed to the assembly guide on Halls Website with clear diagrams which has helped greatly. Waiting for the opportunity to carry on with the construction over the next couple of days. Fingers crossed it all works out.

Sorry forgot to add that I have a halls popular 6x4

Do I need to put a rubber seal around the window glass? Or does it just sit in the metal frame ? Thanks

can you please show how you got the door working? ours isnt rolling on the runners. or did we get faulty one

In italiano niente

I had to put together a lot of things in my life but by lightyears this has the most useless manual I've ever seen. Many things left out, many pictures you can't make out, honestly it was a real painful experience and definitely made by sadists for masochists.

Do you know if these have a minimum temperature? We live in the Midwest and we’re wondering if it’s ok to install them on a greenhouse in an area where it gets below zero Fahrenheit sometimes.

Cant hear it?

door does not fit

Whilst the video is good for the finish product. The step-by-step instructions are not. They are too fast and do not explain things step by exact step for a beginner. This video is no good.

The ones that are in my greenhouse are round tube, like a thin rubber band, this one looks too big for mine, if you would give me size and dimensions of it so I could order, I thought this video was put on to help people?

Where do you get the rubber strip?, Amazon has the wrong ones for this job.

Top of the door is giving me a nightmare right now ..the instruction pictures it comes with are crap

We used to lose glass regularly in storms. I added extra clips so that every pane has 6 and now we don't lose glass anymore.

Thank you! This was SO much more helpful than the instructions that came with the openers 🙂

Now I know.

I found it helped to run a blunt knife/blade along the split in the rubber to open it up a bit. It made it easier to attach to the greenhouse. I think the rubber strip might have been in storage for a while before it was sent out. Really hard to get on, until I opened it out a bit

Today I learnt the roof bit slides in from the sides. Thanks 👍

My cylinder does not twist up like you show in this video. I've tried and tried. Any suggestions before I have to send it back to Amazon

"Especially when it's warm" * is watching this in the middle of a British winter 🤬

This video saved me hours of messing around & likely saved my marriage 😂. I also found once you got the rubber started applying spray polish (Mr Sheen in UK) made it run on smoothly. Thanks for posting 👍

Really helpful - thanks. Followed your advice and all went well.

I have an old greenhouse.....probably 40 years old. I have some panels to replace. The spring clips are rusty so I need to cut them out & replace with new ones. The silver clips for the glass.....I'm unable to locate the glass when I've put them in position. Any tips???

Complete nightmare fitting the magnum

Most useful video of the Halls Popular 86. Far better than anything else I've seen to date. Many thanks from Scotland😁

Thanks for showing the assemble of joints in double speed 😂

Great video very to the point which I like 👍 thanks for your time 🙏

Very useful. The instructions included with the green house were of little use as regards fitting the vent to the greenhouse. The design of the frame looks a bit "iffy"- the bottom g;lass retaining bar is fixed using slots in the side members - if the fixing bots holding the bottom bar loosen, it looks like the bottom bar and the glass pane could fall out.

Hello Matt. I'm building one as well. (So, not an 'official' reply). The part you are referring to is 2 pieces of self-adhesive, low density foam strip, each 600mm long. Its like budget draught-proofing strip you might use on a doorway. If you look at the glazing section of the instruction manual you will see where it is fitted. It goes UNDER the two central sections of part 735. This is the wider, full width upper horizontal bar on the rear gable. The glass panes are fitted over the thin vertical gaskets as normal , but in this position only the upper edge of the two adjoining panes is fitted against the foam strip. I presume this is either or both waterproofing and draughtproofing. I also purchased a higher grade 'D' profile self-adhesive strip to go at the lowest base of the sloping glass roof panes, ie, above the gutter. (silicone is recommended in the video). I would not have been able to get as far as I have on my installation without referring to the video. Saved a lot of time, and remaining sanity, as a few matters are not covered in the instruction manual. 1300h UK.

Love your videos thanks so much for sharing. I'm puzzled by a very strange part on my Halls Magnum; part 428 which seems to be some sort of strip to place on my rear gable. Is this something I should have received or an optional piece?

Die schlechteste Bauanleitung die ich jemals irgentwo gesehen habe. So eine kranke scheiße

It would have been really useful to have shown the door fitting. It's badly shown in the manual and all these videos seem to skip the process. Mine has never run well, despite very careful installation, and today it fell out! Why the mystery?

Can I ask, how do you get the bottom metal bit on? The glass covers the holes for the bolts. I replaced a smashed piece oif glass in mine and am finding it impossible to get the bottom piece back on. I tried putting the bolt through first and sliding in the glass over it, but the bottom metal bit will not go over the edge of the glass and allow the holes to align.

DO NOT use mastic. You'll never get the glass back out if any breaks.

Are there meant to be rubber strips on the door glazing? The instructions aren’t clear.

Note 1: The black rubber glazing strip on the opening window only goes up to the end of the bottom glazing if you add the glazing strip all the way up the bottom bar with window opener holders (8615) will not fit throws it off by few mm of the rubber, suggest adding the glazing and cut the glazing strip to the top of of the bottom glazing then add the bar window holder (8615) at a slight angle to slide in above the bottom glazing...hope this helps a few !! Note 2: If adding rubber glazing strip in cold months bring inside drop in hot water, leave for approximately for 1 hr this helps the rubber to expand then apply to greenhouse fits like a glove.

It doesn't even show you the clip close up never mind how it is fixed, rubbish video

Thank you this was very useful 👍

Have the same. Very good quality, everythink fits perfectly. But. It took me a day to attach the rubber profiles that secure the glass, your looking at some 60 meters of it. Serious pain in the behind.

oh fantastic ... just about to get a greenhouse and it was bothering me how to go about removing them ... BUT no more !!!