Відео

What fuel injectors do you use? I have now finish my CB250N supercharger build and started with a CB250N turbo build. My plans for my turbo bike is fuel injection with a Maxxecu ECU.

next time make it 20 psi with ethanol 50/50 .😍😍

Heavily modified is an understatement lol! Awesome work!

I have a Honda CL 350. I want a feeling inject it. Where should I start? Thank you.

Mr. Honda would be "Proud" of you, Kid'0...💯👍💫

Bro I love Ricks they carry so many upgrades to classic bikes

There's so much I like about this build and so much I would do differently, that said I can't discount your craftsmanship at all, and if it were easy there would be hundreds of videos of this concept, there are very few. Thank you for your tutorial. I am considering the same idea with a 4 cylinder classic Japanese bike.

I have a 4 cylinder bike, I'm considering hitting the junk yard for an EFI kit from a car, and see how I can make it work?

Why not just run every thing off a lithium battery and save the HP from being wasted on powering the electronics. Its such a short run time so there's nothing to worry about.

I know this is an old video but for anyone watching if you use a copper head gasket there is no need to retorque after heat cycling it. You pre-anneal it on a glass top range prior to install and away you go!

I didn't know sh*t about injectors or how in the world people control injection timing, duration or anything about how to plug an ECU and control it. Now I have an insight even if it's not an in-depth. Learned a lot today !

Congrats on the record. Im working on a 172cc engine and an amr 300. Would you be willing to share the ratios you ran and the boost you got. Looking to keep it under 7 psi.

What is the tool used at the 9:57 mark to make the o-ring boss recess for the AN-6 ORB fitting after cutting the threads? I need to do something similar for a custom pressure regulator I"m adapting to my CX500 Turbo. Thanks!

Following. AWESOME!

Avesome Job! makes me want to do same with one of my CB's... 😀

good work.

I've got a 1971 HONDA CL350 and it will still run after 444 years.

I don't think I've seen any engine work from this guy, beyond an intake manifold.

If you didn't already buy something, I'd tell you how you can use a P59 from a 2004 Silverado (and many others). They can do 12,000 RPM, reallistically not a lot beyond 8,000.

Yapping half-mindlessly, or loud shit music... You know... you can just film what you did and upload that. Most useful thing I heard was "10mm drill bit worked out pretty well". The rest makes me want to bash my head off my keyboard.

I don’t understand why this channel isn’t blowing up this is some cool work you’re doing with this old bike

Please install GUARD RAILS for all the exposed VITALS / ancillary s ... I can't spell😮

Well done young man... your graphics are easily read. I just wanted to know how that SUPERCHARGER was the weird part of the build ??? Did you make it? , can I get one ??? Hahaha 😂

Nice whip bra... continue the jou

THANX Rolland!^*[/÷%^*/... if I didn't know better, I'd think that friends and family may have got the WICKED Alpinestar apparel 😂🎉😅❤

You're inspiring, I had to re-test to get motorcycle M-CLASS license 10yrs ago when I turned 50... and that was on a Yamaha 250cc twin... How nice it would have been to have your SUPERCHARGER on that rig !!! Thanks Lawrence 😅

Please be SAFE... You are a wild man🎉

Cool mode cool bike! 😉

Hey new idea brotherman! Can you make another Honda motorcycle but this time instead of converting it to efi, convert it to diesel. Using the same output shaft system you have for the supercharger use it to engage a cam lobe driven injection pump to inject diesel. Machine new rods and piston for a diesel appropriate combustion ration. I had this idea but I know if there’s anyone on UA-cam that can pull it off it’d be you.

How can I link my ECU to the Raspberry PI?

i recently ordered a bluetooth sensor board for telemtry logigng for the racetracks, i figured i would make a raspberry pi system that runs android and make an app for it to log it. Now i am waiting for a screen, i figured i could just as well make the sensor modular and use the system withthe screen as a navigation system when i'm on the road. Was curious about also hooking up the ECU of my track bike to make the entire system a motorcycle dash+telemetry logger. I was looking for housing builds but this video got it all, nice work!

do you know what exhaust pipe that is? looks liek a sweet 2- into 1 notihng like the original cl350 pipe

Wow I clocked 77mph at a flying 1/4 with a standard cl175 Burt Monroe ran a velocette and his Indian at the same event School road Mosgiel nz 1971

1 cylinder??

These motors will live long lives at 50hp the trans not so much but clutchless shifts nice and easy and you can get 60 through the box before the input bearing gets pissed. You can use a crf230 basket and primary gear to make the clutch have 20% less load aswell as make you gears a bit wider and the china versions have a 6spring basket that will fit your springs plus two. Our compound bike is xr200 based but i have a few of these and rebel 250 motors around that iv stole stuff from for the compound bike in the early days. Its not all the same but its close enough with a little love most of it works well. Fyi our stock parts combo with a custom destroked crank pin took 60hp using basically the same rod as your motor before it let go at the bearing you have two so your probably not ever gonna worry about the rotating assembly but ring gap on the other hand id go pretty big and maybe add a piston squirter to keep things a bit cooler. You can also put a bigger oil pump really easily which helps with friction at 12-14k rpm which from what i remember i had a race bike as a kid that used one and that was about where the party was at its best and i know motors didnt live until we added a bigger oil pump and cooler. Not a power thing just a they like to rev but cant feed the head great. Awesome work i really appreciate the effort thats gone into it lol i understand all too well.

Man you cane far 😂 good luck and get some injectors so you can turn that boost up 😂 but really add some dry ice to your tank and chill the fuel before the run, e85 loves it methanol really adores it. If i may i would actually not get bigger injectors instead id make a nozzle at the tb pre blower and a solenoid triggered by a hobs switch or your standalone. Think something like this the engine gets to 9 psi the nozzle opens giving fuel from the rail pre blower cooling the blower and the mixture along with raising its efficiency (seals better). Pull fuel from the injection map at crossover and just use the extra baseline fuel from a jet ect to get the extra power. I think the heat soak minimization would be helpful because 200°f iat is pretty toasty at the end there and at only 10.9psi of boost. I bet a nozzle setup wouldnt let it get above 110° and if you wanna turn the boost up you need it. Also the air filter... I too thought it was fine... Back in our pull through single turbo days i learned those things suck.. we picked up from 10psi to 17psi taking it off after seeing it move under boost. These days we use a filter bag on a velocity stack from a Harley kit i had. The nozzle will also make the air going inti the blower densor and raise boost a noticeable amount. I know in my Volvo i saw a gain from 15psi to 17psi with the preturbo injection both on the gate. We did see a noticable power increase although our intake temps werent near what yours are so it wasnt huge. On the compound bike i would but we have two intercoolers so it wouldnt work out great but we did add a water injection at the port for cool down on back to back runs as were slowing and coming back to the start line.

Nice work man!!!

My stock 1971 CL175 would go 82 mph, so 100 mph on a modded, blown one is a piece of cake. Congrats!

Hi, very interesting! Would you mind sharing more information, Syl's and so on for a similar project? Thanks

Nice build. I'm building a CB650 with speeduino. Upgraded charging to VFR800 charger. Build has been sitting for a while but now I got some inspiration. Maby I should put the build on youtube also :)

This helps a lot because I have one and it has not run for as long as yours has thank you

What kind of gasketing are you using from manifold and the head ? Clean Build ! ..... you'll get 'er !

Congratulations

I am struggling with the carbs on an 81 kz 750. This is very interesting

I was lucky to get 75 out of my 72 CB 175 down a slight grade 😂😂 Good job mate, you put a lot into it 👍👍

My apologies, but I am trying to help a friend who has a 175 Sloper she wants to restore. How can she get in touch with you? My hope is you have a parts source that will make her project easier.

Yoo man.. how is it that going?

How did you build custom blower mount. ?

Go up on gearing , go up on boost= higher mph