Відео

Flywheel

The coolest person!!! 😎🙌

👍 👍

Make this with a stack and maybe some more adjustments for like 800$ and itd be amazing, I'm gonna pick one up soon.

Great video. The only thing I don’t like about the reppins are the side rails.

I have the 125 lb reppins. I love them. They're super easy to use. I've had to drop them at heavy weights only a few times but they've held up with absolutely no damage. Yes they will get jammed at times and the rattle is somewhat annoying but if you're hittin some hard sets the rattle is basically unnoticeable. The pins coming out has never happened for me. I don't have really big hands but if you're mindful of it I can't see it happened much. These are without a doubt the best option on the market imo. Great review though. for people who are very picky all the points you brought up are valid and worth saying.

I got some used powerblocks with some extra handles to reduce the changing times, love them. I would say it is more of a budget thing these days - agree the Rep ones seem to be the best. If you need heavy weight (over 100) these make even more sense due to the lack of competition (ironmasters and loadable are slow, and commercial power blocks cost this much or more). If you are doing 90 or less pounds, tons of options so hard to say. I will say this, in the last 3-4 months since these became more readily availability - powerblock prices have come down so it is definitely impacting the market.

Do you need to bolt them to the ground?

Have you tried supine pullovers ( with you arms moving the weight) on this machine?.. how well does that work? Would love to see a video?

It would take a lot for me to upgrade from my powerblocks. Not the best, but its not a big enough issue to justify the cost. Great review homie.

Btw, curious as to why you ddnt upgrade for the ares 2.0? I recently purchased mine during Black Friday and picked it up in Cali showroom. I also watched your guide video for the ares before purchasing one. I chose the 4 post army green uprights, blackwing, Colorado bar. I got the utility seat too but never use it and their chains. Planning to do belt squats with it but haven’t tried yet.

7:07 good note, that looks like it would be a problem

There’s another con of the Reppins, when you drop that to your rubber flooring and the weight is heavy, it’ll damage your flooring, due to the sharp edges of it. Wish they made it round. The cage design sucks too

Powerblock Pro 125 / 175 Commercial are the best dumbbells for me. Heavy weight! They make no noise! I got them very cheaply for 500€ and I replaced the handle with knurled one.

I'm glad that I didn't buy the Rep x Pepin. I went with Eisenlink Adjustable Dumbbells, which go up to 160 lbs each if you buy the longer screws, which I bought.

so for us people vertically challenge not a problem with height :p

short cuts for the lazy: 1. get a timber/plywood merchant to cut the wood pieces to you exact specifications. 2. use wood-on-wood adhesive, instead of screws or nails. 3. put a yoga mat on top.

Yoo habaneropapi here the guy that made the original post about my knuckle catching onto the pin and unlocking it mid lift and the adder weight falling out and smashing my face and almost everyone over in the r/homegym subreddit hates me for it. Love your review very nice editing very useful information. Somethings I didn't even think of. I actually fixed the major concern of the magnetic pin unlocking mid lift and I posted a tutorial within my rep pepin review video check it out. Good to see I'm not the only one dealing with this. Also I think i may have found a solution to your weight loss plate jamming. You can loosen up the brackets that hold the dumbells. You do this buy simply loosening the bolt that hold the bracket onto the bottom-left plate without fully taking the bolt out you push against the the bracket to widen it just a bit and tighten the bolt down. That should be give you slightly more wiggle room so that the plates don't get jammed. Keep up the good work!!

Solid callouts and potential fixed offer

So run far away from mikolo

Ryan from Rep confirmed they were going to be 1.25 lb adders on his Instagram post showing off the Storage Stand

“4 inches is fine”

Nice to see them build something more substantial. And it's weird to me that so few mfrs. use dual weight horns. What good is capacity if you have to buy all new plates to cram it all on one horn.

I still am glued to my powerblocks lol nice video bro!!

like iron master more)

Been searching around for something like this. I have a full range of hex dumbbells and a high low machine. This bench would compliment my gear nicely, allowing for some solid leg work. My only hesitation is the attachment itself, does it detach from the bench? As I’m thinking it looks very awkward and might potentially get in the way when kicking dumbbells up for bench pressing

For me the combination of ironmasters and Trulaps does the trick. I use the small and fast to adjust increments of the trulaps at the smaller weight range and the robustness and safety of the ironmasters at the higher weight range (where I don't change the weight so often - one heavy set, done). I don't like the cage-cesign of Reppins or Powerblocks too much.

reppins look great, but cant move on from my ironmasters for them :(

Maybe you can help me. I have an Ares 2.0. I feel "cable resistance " when using it, especially at low weights. I always hear it described as buttery smooth, but I don't feel that. I've used silicone and the cables are seated on the pullys. Do you have a different experience? 13:20

Interesting product, would consider it but doesn't ship to UK. Great review though.

I think these are definitely nice dumbbells, but also WAY overhyped. They are just the new thing that everyone has been waiting for. I will stick with my powerblocks, super simple, no moving parts, will last me the rest of my life

Incoming DIY stand video?👀

Forgive the ignorance. Why not just use the magnets only?

I filed a case for fraud against Mikolo, they will pay me for scratching my 2000$ bars and for lie fraud regarding the possible load of the structure because it collapsed under 500 lbs squat and damaged my disc I will be demanding 100 thousand dollars in compensation for my lost health

not that good better pay once that 5000$ for best one and be set for life)) and their clams are radicaly trollish it will bend under 400 lbs barbell drop max 700 lbs will break it down like cardboard)

It's 300 on sale now .

Walmart is holding a flash sale on the M4 and it’s listed at $850 but the original price was $3G? That’s with no bench or weights. Meanwhile I can get the M1 Pro with everything included for $2Gs. I assumed the M4 was a higher tier build because of its “base” price at Walmart. Thanks for stopping me from making a mistake

Any experience with the F35?

muppets don't understand basic concepts like rom on a shoulder press apparently... looks like a good piece, idk why so much hate

Hi, great vids! Which would you recommend between this and the Major Fitness F22? Ty!

Alot of people are looking for options for leg curl/ extension combo with a consistence resistance and this has been the closest machine to what most people are looking for. Now all we need is a better construction/ quality. Need something for sub 600-1000 price range.

Ok I have to ask your opinion. Im ready to purchase a functional trainer with a smith machine. Im looking for good quality, good price range really nothing over 2500.00. Im looking for a smith machine that offers a wide stretch for a cable crossover and smooth pulleys. Ive looked for quit a long time and it is getting over whelming. Ive been looking at ritkeep, major fitness B52, and they both gave good customer service Any recommendations??

I need a 6 pack for $45... seriously! 😊

Finally someone with an 80" doing videos. Hard to find so this was really valuable, even though it was on the 1.0.

Can you buy either option? Or is the 2.0 just the new design?

Where did you buy the utility blocks?

Where is your link for when I make the purchase?

just cancelled my mikolo order and ordered the ritfit thank you so much !!!

link for sale ?

Thank you for sharing.