Відео

Sorry I don't have that at the momment

Glad you liked it!

If by this comment you mean the content is AI generated, that may not be totally correct. The only part, is the voice over every other part including the comments script are human generated. Please watch our other videos and see. And don't forget to Subscribe and like

Nigeria, but is not for sale yet. We are working on it

Yes it did

@@agritechtv5134 Great. Mine has the same problem. I'm not sure where to refill and the oil capacity

Yes that will be adequate

No fuel is expected to come out of the return port if the nozzle is in good order. Kindly order replacement nozzle if you noticed such. other causes maybe 1 maybe you return valve plug or seat damage, please check the seat and confirm okay 2 the nozzle is not properly align or the cover is not priperlyi stalled. Check and cotrect as needed

Religion? Dont understand

Sorry i did not have the part number, i did not change mine, only cleaned and installed

На моєму моторі стоять dn12sd12, на Алі є дуже непогані аналоги від ideeseel.

Thanks for the feedback, we will improve on the audio

Thank you too

Sorry for that, you can source parts online and ship to your country

Great observation

Thanks a lot

6

You're welcome!

@@agritechtv5134 л

Thank you

Thank you

The number were not indicated in the service manual and i did not have the need to replace mine but you can cheack yhis web page to see if information provided will work for you. www.amazon.com/Kubota-Steering-Shaft-Repair-B6000/dp/B06XGVDLDH

You will see the numbers unfer "Description"

www.google.com/search?q=kubota+b6000+steering+parts+kits&client=ms-android-transsion-tecno-rev1&prmd=sivn&sxsrf=ALiCzsbgUPdoV2y7tlFE0h9m-rsXH8Y_Kw:1666546259166&source=lnms&tbm=isch&sa=X&ved=2ahUKEwi8153O8Pb6AhVS26QKHWVeBnAQ_AUoAXoECAEQAQ&biw=360&bih=624&dpr=3

That Is google link to various parts store for the part

The way i do it is crack open connection at the nozzle then kick the tractor for about 4cycles to confirm all air are out then tight the connection back. This always clear the line, there is need to rectify the point of entry of the gas unless the fuel finish i the tank while the engine is running. If you did not loose your tank level then find where the gas came in and rectify else you will continue doing this procedure at all time

@@agritechtv5134 Ok, I will try that. I have a hard time starting this tractor even when when it was primed with fuel since I brought it. Book says it has a glow plug, but doesn`t say where it located?

Sorry i don't get the question

You may be having delivery valve which is normally spring loaded valve, if the valve you see has spring on it, then is a delivery valve and you cannot remove it. It is responsible for building pressure in the injector till the injector opening pressure. You can take it apart, clean and reassemble the part for installation. Let me know if you need more support

@@agritechtv5134 Ok ,The part you are putting in at the 8:22 mark , inside of the nut part is the needle valve, I don`t see any spring in it. does it unscrew so I can clean it? (Finally got that part off the main, has the washer in it like you show) I don`t think whoever owned this before I did , ever had it apart because I had to heat up all the joints just to get it apart. Thanks

@@agritechtv5134 How do you take it apart, does it screw in?

@@agritechtv5134 I don`t think the prior owners ever worked on these as I had to take a torch and heat everything up to get it apart

@@agritechtv5134 the part at the 8:12 is the part i am talking about

Thank you for watching and comment, we are grateful. Hope you have subscribe to our channel.

Great that you consider checking your, pls make the video and share. Thanks

Oil type of the steering box is SAE80 to be replaced every 300 run hours.

@@agritechtv5134 thank you my friend

Thanks for the observation, we will work on it

Thanks sir

Do you have the part number for this key switch?

send the link so I can order one too. because it was mine and it broke   Σχόλια Αποτελέσματα ιστού 

What's the part number please

I will need more information about the behavior of the lift arm, some question that comes to mind is do you have external leakage, is it dropping gradually or suddenly. If you can make a video, upload and share the link with me maybe i can suggest some possible remedy. Thank for watching the video.

Appreciates

Thanks for watching

Thank you