Відео

how can I remove the nozze? thank you

Don't dilute the paint

Settings?

Hey I've got the x3 pro and I can barely get it to print anything and artillery customer service is garbage. Where can I get some assistance?

was the pause print caused by the filamennt sensors ? see if disablin it works.

Where did you get the files lol

Sidewinder X4 pro already release ? so fast... wonder what R&D was even done ?.

I thought k finall found a vidoe on how i remove the nozzle ._.

Was this all one file or three different files

tha'ts a weird industrial design for the filament in to that shroud, is there a PTFE tube missing? seems the filament would wear away at that hole after a while.

Hi, I get preview when I save it as TFT file? Did you tried it?

I cannot get the filament to stick to the bed. The first level of print goes down and then starts moving while the second level goes. I have tried everything and still does not work. Been trying to print the test boat for 3 days now. I am very new to this printer (used a Tina2S previously) so I do not know what the issue could be and there does not seem to be any trouble shooting information out there. Can you help me?

When working with engraved resin pieces, we let the paint dry before wiping it off - and no water spray before painting.

Isn't this a quick change nozzle unit?

Tú puedes reducir el sonido del ventilador con una almohadilla para amortiguar las vibraciones del ventilador. Yo acabo de hacerlo y mejoro mucho el sonido

This video answered one of my main questions. Thank you Have you looked inside yet? Is it running a Ruby like the x2? Trying to know what it would take to convert it to Klipper before I take the plunge

😂when you raised the Z I looked up to see which one of my printers was freaking out in the middle of a job 💀

Any chance you’d be willing to share your settings? This is super cool

How do you remove the silicone boot?

I have the same printer, I ordered nozzles from x1 x2 and volcano, they fit but I need to stretch the hotend cover

Hi do you have implement m600 in this machine?

Did you manage to print with a regular Volcano Nozzle ?

Oh I'm sorry I thought I saw a Creality KE Neptune 4 Clone with and M5C head putting down a print on a Bambu Bed. My Bad I must have been mistaken. No wonder it prints so well. Nice Video And Print.

What if you trim the nozzle head with a lathe?

What did you do to solve the bed wobble. I did turn the eccentric nuts all the way to the iside part but tthere is still some wobble on the bed. I did remove the heat bed as well to double check that the eccentric nuts are all the way inside.

Que slicer usas para la X3?, ya tengo la mia, pero no se cual slicer usar. Gracias

The X3 plus is my first printer and there are a few things that really have me confused about it. 1. Is there a 110/220 voltage switch on it? I have looked high and low on the base for one. 2. The bed has 6 leveling adjustment wheels, one at each corner and two at the center of the bed sides. I'm just not sure what those two adjustment wheels are for. My X3 plus didn't come with a micro SD card but with a Flash drive along with a micro-c adapter cable which is OK with me.

It have self levelling and wi fi ?

Good video! I just received my X3 plus and have "bed wobble" and bed leveling problems. I tried to correct using the 10 MM adjustments under the right side of the bed. It seems to interact with my bed leveling adjustments. Did you by chance take any pictures of how you took the bed off and what all the adjustments are. I understand the corner adjustment wheels, I don't understand the two wheels between the left side/right side corner adjustments. Is there a specific order that these adjustments should be made and is there someplace I can get a labeled drawing showing the layout beneath the bed. Any help or comments would be appreciated.

Any update if you were able to trim the silicon sock to allow a standard volcano nozzle?

How do you get all the different colors when you start with a raw pmag?

Is it possible to use the M600 command?

Do you recommend me to buy X3 Pro or X2?

This things hauling ass

Hi, I was thinking buy it but it seems do more noise then X1 and X2, it's true? In your video it's seems very quiet. Thanks

My X3 showed up today; playing around with it..... now to figure out where to get more 4mm head nozzles, Im not seeing them on Artillery website, Amazon on a Google search...... good video!🎉

What did you use to clean it? This is my first 3D printer after using an X2 at the school I teach a few times and I know I still have a lot to learn. The X2 has a glass bed and I saw somewhere you can clean it with acetone. Is that safe on the PEI platform? Thanks for answering these questions. This model is still new enough there's not a lot of information out there. @deervalleyengravings3088

Did you do anything to prep the bed? I have tried the 3DBenchy print twice and both times it broke loose from the bed and started sliding around. 25% the first time. I used a glue stick and got to 85% the second time. So far, I am using the sample filament that came with it since the filament I ordered hasn't arrived yet.

hey, looking forward to testing the x3 plus! About the nozzles: can you give me a hint which Nozzle the X3 plus uses? I want to order an 0.6mm nozzle (which makes more sense for a larger printer, right?). I also installed one in my creality K1 - and I like the speed and efficiency of the prints with 0,6mm (I'm mostly printing functional parts - not decoration). thanks, greets from Austria, Mario

Nice printer, I bought it too... do you have any cura profiles for the printer? I have seen some have it on there micro sd that is coming with the printer, but mine was empty.

Keep the updates coming! I've got 2 of the X2 printers; my X3 is due to arrive in 3 days....

Good Video! Please more about the printer.

Good way to screw the face up

Lame

What machine are you using?

Why are you diluting the paint?

It’s hard to tell which mounts have LED’s… all of them, or just two?

The one that he uses last is going to work the best cuz it's already going to have three or four different paint already soaked in he should have put all four different paints on four different parts and let it all dry then wiped it off to see the better results

I think he's not leaving the paint on long enough to let it dry spraying the liquid breaking down the effect also the ingredients that's in the Windex there's two different kinds of Windex I wouldn't have used either