Відео

Let me start to say THANK YOU SO SO SO SO MUCH!!!!!!!!!!!!!!!! I am so new to using my cameo 5 never had a cutting machine and just want to have fun to do some projects and don't need more than basic edition. So MASSIVE Thank you for this!

Thank you so much! My computer did not want to save any DXF files, but I could use convertio and make a SVG into DXF that way! This have saved me sooo much time and wondering. Because somehow, beyond my knowledge I have managed to make a SVG my silhouette have accepted earlier trough incscape. But I never remember how, it just takes maaany attempts and a lot of time. Today, after knowing about the file Silhouette accepts it takes so much less time! I can enjoy it now! 😁 You have ended my suffering! 🤭

Thank you! My company recently decided tonuse the safe bustelo coffee containers and give me the empty ones for my plants! This is perfect 👌

Thank you! I hardly ever use my machine so I didn't want to upgrade!

THANK YOU

If you pull the drawer right out you can flatten it. Loved the video, thank you for all the great tips. <3

After you've removed the label from your tub, take either a scissor ( I have a Fiskars) or a utility knife and scrape the remnants of the foil seal from the rim. It will make a mess, so be prepared for that. Also, try to keep the blade at a negative angle, so that it does not dig into the plastic. Switch off scraping the inner edge, the top surface and the outer edge so that you don't dramatically alter the lip (in case you need a good seal for your use. With a little practice, you'll figure out what works and what doesn't. Also, those of you who have a Cricut can use it to cut new 110mm seals from cereal box cardboard. Cut them to exactly 109mm if you can. My daughter does mine for me and they work great. I have repurposed dozens (if not hundreds) of these containers for use in our food cupboard and in my garage.

Sometimes I just cover the old label with a few pieces of decorative origami paper.

Do the overcut settings stay for all future projects?

I just wish this was shown in a closeup video. Thank you for sharing this.

Great video! Where did you get your tweezers, and light pad?

Since I had this question may as well post it. At least for the glue on my milk containers, the water needs to be a temperature of 160F for it to work. my first test failed. (was the water not hot enough, cooled off too fast, etc. I don't know) It also only took 10 minutes before I checked to see if it would peel off. Though I am not doing this for crafts, but with the majority of plastic does not get recycled due to its contaminated. i.e. they cannot melt the plastic with paper labels on them. So those are sent to the land fill.

After a long time looking at videos trying to figure out how to do it n thanks to you I got it. It waz so easy and fast 😊

That is a lot of work to remove the labels. It is very simple to remove them. All you have to do is use a good paper towel with alcohol. place the towel where the label is and let it soak the label. After a minute you can start rubbing the label.

Is BRUSHKITE still working? how to use it?

I had to rub it on twice. First time I used a paper towel, then rinsed it off in soapy water but shipping label residue was still there. 2nd time I used rubber gloves and it worked perfectly. After rinsing in hot soapy water no sign of the label residue. Thanks again

Thank you so much!! I’m currently not in the position to upgrade and this saved me so much trouble!

Thank you Hollie! I’ll try this on a shipping label that was stuck onto a protractor’s plastic cover and shipped to me via Amazon. I guess I should be happy Amazon are cutting down on packaging.

Is there any way to warp words in design space?

I'm glad I ran across this video.

Excellent teacher and video!

Thanks for the video. I just went from pulling my hair out to Heck yeah! Cad-cut soft foam

Thank you!

Thank you!!!! This was on the nose with what I needed to know. I'm a newbie and want to cut files I bought for myself.🙌🙌

Hi Holly, when I get to my "save as" dxf file, it gives me 2 choices. The first one is "desktop cutting plotter (Auto cad DXF R12 (*dxf) the second option is "desktop cutting plotter (Auto cad DXF R14 (*dxf). I have a Shiloutte Cameo 3 if that makes any difference. I don't know which one to pick, can you help me?

I'm a newbee & enjoyed this tutorial so much. Very clear & precise instruction. Do you have other tutorials on using a Cameo 4, as that's what I recently bought?

Thank you- SO helpful!

Omg thank so much for this!!

I make packaging mock-ups with a Cricut Maker before and I use Illustrator to create my dielines with two layers separated as cut and another, score which I then save it as a .svg with the two layer included. In Cricut's Design space, I just import my .svg file with the cut and score layers and just easily have Design Space determine which layer is which and just cut and score my dielines. I was thinking of trying the Cameo 4 which has a 24" version but I was wondering if I can have cut and score from a .dxf file into free the Silhouette Studio Basic edition like I can in Cricut, or will I be required to upgrade to a paid version in order to use one feature I needed?

thanks a lot....you save me

This was amazing information!

Did you do anything after clicking Save as or just click it then close out the materials panel?

You are so amazing and a life saver!!!! You def deserve more subscribers!!!

You had the perfect answer I was looking for! 😊 thank you

Great video very well explained, thank you 😊

Hi Hollie, I enjoyed your video very much. It's amazing how baking soda and oil removes label residue so easily. I have a Pink Floyd Poster, which unfortunately I rolled up with the picture outwards, and put a rubberband on. The rubberband perished and left residue on the poster. Do you know how to remove it please? Many Thanks Sarah 😊

How do you deal with the aluminum foil that is attached to the inside jar lid top. Thanks

I just tried this and it still wants to save the SVG file as a SVG instead of DXF form inkskape!! Help!!

Its ur new friend Eddie Quinones

Very helpful. Thank you. :o)

Thank you for this! ❤️

Perfect video, short and to the point. thank you

This video was extremely helpful! I have Silhouette Studio Basic Edition and the free SVG files were in importing. Well, this video saved the day. Thanks so much.

Great video and explanation of something I’ve been trying to figure out. I’m subscribed now and going to watch everything! Thank you.

That was very helpful. Used it on a dial foam soap bottle. Came right off!!

I love your videos, so informative! So happy I found your channel. Thank you!

Perfect! Thanks for helping solve my problem!!!!!

I live in a van. I have a 1 burner propane heater for cooking, and a sink in the shop I rent. You have no idea how extravagant that kitchen looks. Love the U counter, it looks like a huge work area to me.

Heat the glue up perfect im trying rn

Thx very helpful I love reusing containers and now that I know how to take the labels off I can reuse a lot more thanks so much!!