Відео

I'm here due to UFO researching.

Have you tried to shot them microwaves with those homemade microwave guns made with microwave oven magnetrons? (sorry it looks like a tongue twister)

ive dismantled one of these kidde detectors in under a minute, the easiest way is to pop the housing off, pop the board out, clip the wires, crack the board in half where the ionization source is, use pliers to remove the soldered bits once the board is cracked, cut the plastic bits holding the source, and crack that in half and you should get your button source. ill eventually make a video over the process.

1:33 correct, this was meant for raman measurements of a specific spectrum, I think the ramanshift of carotenoids in the skin for some very niche product Ive never heard of. OMG 2:40 nooo the spectrometer was already aligned for UV-VIS, and cell phone torch light is a terrible example of white light for spectroscopy

Quick question: Are you wearing any sort of protective outer clothing besides the gloves? Just wondering out of curiosity.

I wonder how that changes with hot plasma?

It occurs to me that you may what to investigate and report on the hypothetically cleaner energy production process developed by David LaPoint and his open sourced patented bowl shaped fusion device. I've followed David LaPoint for a decade +-. My interests have been focused on healing energies over weapons' energies of course. All LaPoint's publications are open source. He is inspired through visions. As a result he apparently has had to migrate out of the US to operate. The energy patterns he reports appear to be on all levels from the micro to the cosmic-universal in magnitude. The watching speed of his videos can sped up using the setting button on the video, of course... which I use for expediency ... sometimes jumping ahead 30 seconds at a click to audit. LaPoint parallel's NIF at LLNL, bypassing pellets (no pellets used). The implications of his work is self-evident. He is compelled to first state what he plans to do before doing it....then testing it live action. When I say he is "compelled" I am parroting his own statements that these are Devine voices in his head.... I think you'll find his work of more than nominal interest ... Primer Field Part 3 ua-cam.com/video/1kWWNN_fmqo/v-deo.html Primer Field Part 2 (on line) if interested Primer Field Part 1 (on line) if interested Many Other Videos (on line) if interested reaching back many years. Here's a good video that I feel is very informative and seemingly accurate: ua-cam.com/video/36-yUmi0uF8/v-deo.htmlsi=N1dRpZNCBoaK1U3C

I hope that I have a financial capabilities to fund my own research just like you, Sir.

Thanks for posting this. I was always curious about how it would react. 😊

Thankyou so much for sharing

how exactly do you plan on generating neutron (0:40) ? what are the ELSA and power source for the RF? it "seems" nice and all but I can`t tell where you are going with any of this .. still very cool stuff that must`ve cost arm and legs !

Dude! That`s a lot of very nice equipment there! When to expect an update?

this video is so cool! I hope you upload more soon :) My favorite channel forever <333

Can you tell us how you performed and calculated the impendance matching of the HF coil?

Oh that's just beautiful! Great job! I subscribed and am looking forward to your updates. I appreciate the work and cost involved with your project, my garage lab looks similar.

Broo can you make a full video on this thing working

Nice work. Some of these setups emit x rays, so if possible do some measurements

Wow that’s amazing. I hope my lab ends up looking like yours one day. Those cold cathode X-ray tube are really not easy to come by, I’m still working on one that’s powerful and efficient enough lol. Brilliant work, keep it up, you’ve got the most interesting UA-cam channel.

Does it increase the curies if you put two buttons together? And Resealed them in a PNP or a NPN Resistor.

The type of Plasma described here is termed Glow-discharge plasma which is a Resonant discharge of a low-pressure gas. More than The Tesla -Coil, a Rumkhroff coil is employed in a classical stand point.

Great Video! Would love to see more Driving videos!

Can you build a plasma shield .if so can you use it for reentry on a spacecraft

You typically do not use essential oil you mix it with either propylene glycol or glycerin and use it typically in aromatherapy by heating it. In my opinion propylene glycol is superior. The next time you do the product prior to distillation to rupture all the cells from the grated material

For the win tell me the origin of the corona around the sun.

Are you going to post more science videos?

That's a bad license plate to have on a police report after an accident. lol

Use a sand bath. That should improve the heating.

I think the shield was there to reduce stray light in the original wavelength range of interest. If this is originally for Raman, the spectral range should be about 150nm range. So not all of the 2048 detector pixels are used. For calibration, you could use a neon lamp or mercury argon lamp to calibrate the spectrometer with the peak positions from the calibration light source.

You built the most interesting private lab that i have ever seen. My greatest salute! Looking forward to seeing the new data generated from your facility!

Wow, that high-pitched screeching noise is intense! What's causing that?

Doesn't it include the full digital dash?

Nice video! Is the hydrogen plasma emitting ultraviolet? Do you need ultraviolet eye protection? Do you have schematics of your set up? What kind of Tesla coil? Apologies for so many questions. I am excited to replicate your experiment. Thanks again for a superb video!

The three phases of Plasma Discharge Modes should be explained more fully in my opinion, rather one being an intermediate stage towards an arc. They are PDM 1, Dark Mode and where there isn't enough power density in the discharge to be seen in visible to human wavelengths of the Electromagnetic Spectrum. PDM 2, Glow Mode and where there is an increase in power density in the discharge and can be seen by humans and PDM 3, Arc Mode and which has such a high density that the discharge enough of magnetic field to restrict the discharge into a tight filament.

2:13 looks like a modulated crt coil signal makes a moving plasma image

The gas is expanding causing compression. You need to add oxygen at a minimum rate. Try Tetra nitrogen containment.

This looks pretty advanced for a garage project ^^.

Although don't listen to me I'm just some guy on youtube

Obviously matching the resonant frequency of two objects links them in in a prime evil entanglement but that word is more made up basically it's Magic because the root of the word magnet it magic

Use resonant frequence to induce Dielectric Induction using "so called entanglement" anyway pancake coils are cool

Wiw

That's like the ultimate playground

I have some vacuum system components and not close to this level 😅 You must have a decent budget. Very very cool though! Making the rest of us very jealous.

This is by far the most ambitious project I've ever seen on UA-cam. How in the in the bloody hell did you manage to acquire all this equipment? Best of luck to ye.

holy shit this is so cool! thank you

Just wondrring if by mistake the pliers pinched the americium would it go critical

Can we chat via email? I want to send you some 3D designs that maybe you will get some use out of.

The GMC-300 can't detect Alpha radiation becuase it would be screaming. The GMC GQ 600 can

Very awesome! Which country are you based? I'm also building a system a bit different. Would like to collaborate one day.

#IHeartNuclear

How are you ionizing the hydrogen in the first couple shots?