Відео

@@lebraun12345 Yes the clamps can be removed, the hardware is M8x20

@@lebraun12345 Yes the S711 Buddha has a slot and lock gobo system to accept glass gobos. You can customize them through gobo vendors. I have a video showing V-Show's slot and lock system here: ua-cam.com/video/uHctj-0gvNA/v-deo.htmlsi=82_kdINlbpKItDk4 The S711 has a 23mm outer dimension gobo with a 17mm inner dimension. They are marked as OD/ID

@@lebraun12345 You can purchase them through my good friend V-Show Jack at livedou.com/

@@TheatricallyJerry thanks so much!!

@@lebraun12345 My pleasure! Thank for supporting my channel! More to come!

@@lovedrumandbass share.temu.com/PaTWcg1q47A

@@user-bm8ys3pd6r you hold down the power button on the wireless remote and then hit the button once on the fog machine. If it's not turning on at all the 18650 is dead or needs charged. Sometimes the 18650 will die if left uncharged for a long period of time. They can be brought back to life by using a 18650 battery charger not the charger built into the FILMOG.

The camera exposure is why it looks bigger.

Thank you dear 🙏 I enjoy making great videos with alot of information for my viewers and customers.

I would love to! Maybe suggest to them that you would like to see a review of the 280C by @TheatricallyJerry and see if they are interested.

So the Artnet node has eight dmx-512 3-pin connectors on the back and I want to access them from the front so I created a pass or feed through. The Artnet node converts a single Artnet 4 signal and properly addresses each of the eight universes contained in each of the dmx ports on the back. When you mount a node to a flight case the ports are on the back and are hard to access so it's better to access them from the front.

Yes, it holds it dmx value if powers lost there's actually a option to change how you want it to respond on the new one.

@@TheatricallyJerry thank gosh. I returned the old model right when I revived it because of that. Thanks for confirming! Just purchased it!

@@Hunterbonnar The new model is much better in many ways, although I miss the twist dial

@@TheatricallyJerry I see that, I’m exited!! I the twist dial was a very quick way to get around the menus however I would take a real ArtNet node functionality any day. The old model I had just did not hold dmx packets unless something was being sent constantly and it was really not good. I was about to buy a different brand of ArtNet node until I saw they updated the design. I wasn’t going to purchase unless I knew it was a legit node which is how I found your vid :). I’ll make a video on it as well.

@@Hunterbonnar it definetly takes Artnet and sends it to the 8 ports. The dmx ports can also be set as either in or out. There's also two ethernet or ethercon connectors as well. It works for what I use it for which is to control 4096 channels of DMX for stage.

Tell them to send me one and I'll review it 😁

I purchase most if not all of my equipment unless otherwise noted. Thanks for being excited about this fixture, the reviews going to be great.

The zoom is fine it's just not as wide on the wide end like with the S712 they are two different fixtures and ones much cheaper. It is however a perfect match with the S712 if you want to compliment each other. Thanks for the info.

@@TheatricallyJerry would it be possible for you to film the zoom of the s716?

Absolutely, stay tuned I release a short on its Zoom capabilities.

@@alexman649 if you go to the 36 minute mark, I do go over the zoom. It's a 16-bit linear zoom.

I would love to, However, V-Show hasn't given me any units to review. Maybe they will soon?

@@TheatricallyJerry thank

Part Two will release tomorrow, you'll love the beam and Gobos on this one! Stay tuned

A 6 degree beam angle is extremely tight for a 3 in 1. There are static Gobos that can make it even smaller as well as reducers for open or the circular beam.

Zero tank leaks, I have had the tank filled for over two months now and it has spilled a drop. The tanks are real glass and metal lids with a rubber stopper to fill the fog solution.

It kind of makes sense and kind of doesn't. I mean I could have lived with just one battery percentage that averaged both batteries or a flashing symbol to tell you a battery is bad. They could have used that Real Estate for other information like the voltage going to the atomizer or incorporating a sensor to tell you how much fluid is left in the tank. But I get what you are saying.

@@TheatricallyJerry Yeah the one I bought also has a glas tank with metal top and bottom but for some reason I dont think its that good even though it looks extremely solid. I like the Ulanzi one much better!

Yes I did it but still can not

​@@27Kfoottball Do you have the latest firmware? They released it in April

Is the USB drive formatted correctly? It's supposed to be FAT32 or it won't work. The system is based off Linux and it can't handle NTFS. You need to be updated to the latest firmware to make sure everything is running smoothly.

I don't know what you're asking? I'm sorry

@@TheatricallyJerry I want to ask you how about your console input image? I want to know How to upload an image ok?

@@TheatricallyJerry can you upload video ok?

@@27Kfoottball ua-cam.com/video/GciuGNgSfJg/v-deo.htmlsi=irDnmtK2ml-4OP7S

The pleasure is mine, thanks for subscribing!

I'm sorry to hear this, maybe a bad batch? Mines still going strong. What broke on it?

@@TheatricallyJerry Atomizer I believe it's called. Whatever holds the fluid.. I already sent ti back. I usually love Ulanzi items, and I understand no one is perfect. It isn't a big deal.

It's already up: ua-cam.com/video/Id2K2nux58w/v-deo.htmlsi=kzdXWwJZU2n5PY-X Have a look😊

Thanks

I'm not sure what you are referring to. Can you explain more? Thanks

Later this week I release part Two and part THREE that goes over the entire light fixture In-Depth review.

I do believe sometime next week I recieve a new unit to review from Becen so stay tuned to my channel for a full review on their latest light fixtures. I also have a review coming up this week featuring a 450w light.

@@TheatricallyJerry so nice....waiting new light

Press setup and then console manage button. The option to set the master faders function key to blackout is available under console manage. You also need to update to the latest firmware for this to take effect.

@@TheatricallyJerry I actually have a Fos designer 2048 console, which is identical to Code victory 3. I don't know who copied who ;) I have the latest available firmware 3.2.7 and under the master options I have: grandmaster and speed, so it confuses me a bit. Thank you very much for your answer, and I'm also wondering if you know if there are any significant differences between these two consoles?

@tomythedj Yes CODE makes one version and other manufacturers silk screen their name over it. Very common.

No difference, same console

Hi, I have another question if you can help me. I have the entire first page of faders programmed. When I program each subsequent page and leave the fader on it active, when returning to the first page, when I lower that same fader, what was programmed on the other page turns off. Do you know if it is possible to program it in such a way that the fader remains active until I physically lower it on another page

14 Channel Mode or 24 Channel Mode.

@@TheatricallyJerry can you make video for 24channel mode what the different 14channel mode control

@lokmanjl9797 Absolutely I can!

ua-cam.com/video/LDkYEguH5F4/v-deo.htmlsi=JPqpV0gpqTmODEo1

My pleasure 🙏 thank you for watching!

To record a macro show you need to have the timecode window open. It's available when you select a empty workspace window. Once open there's a button on the lower left of the timecode window that says New. Once selected a option will show up displaying the show number and mode of the show. You can select it and choose from three timecode options: Internal Clock -MIDI MTC or Internal Music. After you select the timecode mode, hit apply. Then you press the record button and start using faders and your presets, whatever you press on the console is recorded automatically in the Macro show. Once finished hit release or clear and the record button again. The show can now be played back by pressing the play button. I can also make a video tutorial if that interests you as recording Macro Shows is more of a intermediate tutorial.

Thanks bro❤❤

@gamingwithtom2804 My pleasure!

😊

You do realize most of the components on moving head lights are made in China right, so I'm not sure why it needs pointed out. Also LED drivers are notorious for going out including the PSU. Even american light companies get their components from overseas they are just assembled here... That aside, you can get components by opening the fixture, looking at the PSU and finding the manufacturers name or the model of the PSU and googling the name.

​@@TheatricallyJerry They're offbrand knockoffs and not very good. Thanks for hte advice nonetheless

What do you think a few months later btw???

I'm still using it, this is a solid unit and built to last a LONG time. I also purchased their ARDS08 and will be reviewing that unit soon.

If you want a Touchscreen console with 8 Universes of control and a Ln expansive library if fixtures to patch, yes I would recommend a CODE console.

You select the fixture so it's highlighted and then hit edit label on the menu bar and then picture. You have to have your own picture of it on a thumb drive. Select the picture and hit import on the selected picture and then enter.

@@TheatricallyJerry Thank you😃

@@marioferrarisfusarini881 My pleasure, if you have any more questions, feel free to ask.

@@TheatricallyJerry you are very kind, thank you

It has a OSRAM and also 99% of fixtures are made overseas the US isn't big on manufacturing if you haven't noticed. I believe maybe ETC makes some things here but not sure on fixtures. Even then most of the parts are purchased overseas and assembled in the US. I'm not sure where the stereotype of Chinese products being bad came from. There are of course bad Chinese products but there are also bad American made products its the luck of the draw. I'm also not too concerned on quality for a fixture in this price range. If it does what it's supposed to do and does it well, I have no problem with it. Thanks for viewing my channel😊

@@TheatricallyJerry We have the IMRELAX version of this light, and we have 4 of them at my church! They are OUTSTANDING and have been a blast to work with!!!

Glad to hear! Yes I have had zero issues with these fixtures, I have also torn them apart and they are built quite well. I plan on doing more reviews on other CMY fixtures soon. Thanks for following!

Mostly by the included user guide and hours of figuring out how o wanted it to do what I needed it to do. It's a rather user friendly system but can get more advanced with it's effects generator, cues, cue lists, MIDI, wireless control and timecode/music player built in.

@@TheatricallyJerry okay thanks dude i hope like its easy to use once like i learn it i might get one tho because I saw your review

I can't confirm this, I haven't faced any of these issues?

Absolute BS. You must be from the competition. None of the issues you have named are valid. As well, Ulanzi has posted the exact formula/ratio on how to make their fog fluid. You must be from the SmokeNINJA camp of jealous sales reps...lololol.

When calibrating the Touchscreen, the console will shut down and restart after calibrating. If you still cannot access the screen, try turning the console off with the off switch, waiting a minute and turning back on. If that doesn't work M, it sounds like a problem with the console itself. You can contact CODE at main@codelight.com.cn to report this and they will release a update to fix the problem.

The atomizer can't be cleaned, it is meant to be thrown away after it's life (like a vap pen) I'd personally just leave the liquid in it as the wick is already wet and you don't want to dry it out after it's already wet.

@@TheatricallyJerry thanks!!!!

There's 512 addresses in one universe so you would divide how many addresses each fixture has by 512 and that's the max you can have. So if each fixture has 16 addresses you can have 32 fixtures per universe (theoretically).

The problem with atomizing chambers just like fog machines is the more they sit the more likely the atomizer(in this case fog machines don't have atomizers) are treated just like vape pens. The atomizer will go bad after sitting. It's fine if it doesn't have fog solution in it but as soon as you fill it the time starts. L

It has a slight odor to it but not a burning, fire odor, it smells more like regular fog machine odor to me. It does leave behind a slippery residue when using the low lying fog diffuser.