Відео

There's 2 idler pulleys that you can move by hand to get slack in the belt..if I remember correctly..

Or are talking about the blade belt?

@@NINEPOINTFIVEPROJECTS not the actual belt on the deck but the one that goes around the hydros around the 2 pulleys you replaced

Hey, thanks for watching and the comments. I think you may have already but if not please consider Subscribing. I would really appreciate if.

Hi thanks for watching and the comments. RV,s are a ton of work. Someone needs to make a complete maintenance free model! Either way I think you may have already but if not please consider Subscribing and hitting the like button. I would really appreciate it!

Hi thanks for watching and the comments. Great tip there, thanks. I think you may have already but if not please consider Subscribing. I would really appreciate.

Hi thanks for watching. I really don’t understand how HD would let that problem slide for so long. Either way I think you may have already but if not please consider Subscribing. I would really appreciate it.

Hi thanks for watching and the comments. Looks like HD would have figured that out! Either way I think you may have already but if not please consider Subscribing and hitting the like button. I would really appreciate it.

Hi thanks for watching and the comments. Good info on the filters, thanks! Also I think you may have already but if not please consider Subscribing and hitting the like button. I would really appreciate it.

Hi thanks for watching and the comments. Yeah when I checked mine they were wearing very well too. If you haven't done so already please consider Subscribing. I would really appreciate it! Thanks

I used a combination of both. I think I went around vents and stuff on roof with 4" and a long the edges with 6". It is extremely sticky. As far as going along the edges I think I found the best solution as seen in the video. Let me know how it goes for you if you use it. Either way I think you may have already but if not please consider Subscribing and hitting the like button. I would really appreciate it!

Hi thanks for watching and the very kind comments. I think you may have already but if not please consider Subscribing and hitting the like button. I would really appreciate it!

Hi thanks for watching and the comments. I have to disagree with you about some things. First I bought the device that actuates it on eBay for $75. I used scrap steel I had laying around. That and the bearings, shaft and bolts is all the cost I had in it. So, total cost near $100. I designed and built it because that's what I do and enjoy seeing my ideas come to life. I really doubt you could find anything to do this for less than $1000 bucks. Either way, all is good and I appreciate your feedback. I think you subscribed and I truly appreciate it. I'm an old timer and do this stuff because I enjoy it.

Hi thanks for watching and the comments. Yes I never thought about it but recording the actual sound of it would have been interesting. Coming soon I am putting a zero turn in it. I will definitely record what it sounds like. Either way, I think you may have already but if not please consider Subscribing and hitting the like button. I would really appreciate it.

Hi thanks for watching and the comments. It's coming...stay tuned. I think you may have already but if not please consider Subscribing and hitting the like button. I would really appreciate it.

Hi thanks for watching and the comments. Yes I know but to be honest repairing something like this rarely goes exactly the way it's shown. Not just them but other companies as well. The easier they can make it look, the more they can sell. Either way I think you may have already but if not please consider Subscribing and hitting the like button. I would really appreciate it.

Hi thanks for watching and the comments. That's some good information and I didn't know anything like that existed. Thanks! I think you may have already but if not please consider Subscribing and hitting the like button. I would really appreciate it!

Hi thanks for watching and the comments. I used 3M Spray contact cement. That was the only thing I could think of to use and it did well. Either way if you haven't done so already please consider Subscribing and hitting the like button. I would really appreciate it.

Glad it may have been helpful to you. I think you may have already but if not please consider Subscribing and hitting the like button. I would really appreciate it!

Hi thanks for watching and the comments. I agree that it will stop leaks. It's good stuff. Either way if you haven't done so already please consider Subscribing and hitting the like button. I would really appreciate it.

Hi thanks for watching and the comments. Yeah most videos that are selling a product are done so in a perfect world. It's never exactly as they show it. Either way if you haven't done so already please consider Subscribing and hitting the like button. I would really appreciate it.

Oh I understand now. I'm not a repair shop. I just rebuilt my own cart and showed how I did it in the video. If you haven't done so already please consider Subscribing and hitting the like button. I would really appreciate it.

Thanks for watching and the comments. I don't understand what you're asking?

Hi thanks for watching and the comments. I hope it helped you in some way? If you haven't done so already please consider Subscribing and hitting the like button. I would really appreciate it !

Hi thanks for watching and the comments. Yeah I really don't see how companies get away with installing the way they do. You gotta be smarter than the water. Either way I think you may have already but if not please consider Subscribing and hitting the like button. I would really appreciate it.

Hi thanks for watching and the comments. I bought mine here in the USA but it is available internationally. I think you may have already but if not please consider Subscribing and hitting the like button. I would really appreciate it.

Hi thanks for watching and the super nice comments. That was a bad time to discover the frame.. either way I think you may have already but if not please consider Subscribing and hitting the like button. I would really appreciate it!

Hi thanks for watching and the comments. He must have it adjusted just right! If you haven't done so already please consider Subscribing and hitting the like button. I would really appreciate it.

Hi thanks for watching and the comments. Yeah I'm looking forward to completing it hopefully. Either if you haven't done so already please consider Subscribing and hitting the like button. I would really appreciate it.

@@NINEPOINTFIVEPROJECTS I've already subscribed since I saw you decide to fix the rust instead of junking the car like everyone was trying to get u to do or part it out saying that it wasn't worth it but you're like me and saw potential in the car and when it's not going to be all that hard to fix that lil bit of rust in the cowl and the floors . The rest of the car seems to be in pretty good shape and it won't be that bad to fix up. I like the little car myself ⁰

.

So the carb replacement went fine, but now cart is very jerky when pressing the pedal slightly. Gets better when the pedal is pushed further, but as stated, stating out is very jerky. Any help is appreciated.

Wow, I don't have a clue on that one. Did it do any of that with the old carb?

Is the main drive belt good? No chunks of it missing?

No, didn’t do it at all before. Driver belt is good. On further inspection, I did find oil coming out around rhe spark plug on driver’s side. Looks like more than I’m able to handle. I really appreciate your responses and help though. Will.definitaley keep up with your videos !

Hi thanks for watching and the comments. I'm not real sure but I think it has something to do with preventing it from back firing out of the carb in to the breather. Either way if you haven't done so already please consider Subscribing and hitting the like button. I would really appreciate it.

I have subscribed , thanks again !

Hi thanks for watching, commenting and especially Subscribing. Yeah I know I will love it and look forward to the day I have it completed. My first car was a 1972 Runabout just like this one only it was a stick shift. My wife and I dated in it back then. I had several people tell me to put a V8 in it, but I'm just going back with the 2.0. I went to your UA-cam channel and checked out some of your videos. Nice ride for sure! I also Subscribed! Thanks again.

@@NINEPOINTFIVEPROJECTS⅚ I appreciate the sub, I am in the middle of putting a half hatch on mine, it came on the first year pintos only in 71 so they are fairly rare for what they are and wanted one after seeing one. That's cool that you are fixing up a pinto yall dated in and now yall get to go on more dates in one that you saved

Hi thanks for watching and the comments. I just found your channel and Subscribed. I'm going to check out your videos. Many people think I'm crazy to do what I'm doing in reworking the old car, but I'm a "I'm going to make it happen" kinda guy. Either way I think you may have already but if not please consider Subscribing. I would appreciate it.

@@NINEPOINTFIVEPROJECTS Subscribed yesterday, cool car.

Hi thanks for watching and the comments. I'm sure building airplanes require a lot more finesse than my old car. That would be interesting to watch. Do you have a UA-cam channel? Either way if you haven't done so already please consider Subscribing. I would really appreciate it.

Hi thanks for watching and ythe comments. I'm sure it would be easier to just chunk this car and to get another, but being an old "I'm going to make it happen" kinda guy, I'm going to continue with this car. If you haven't done so already, please consider Susbscribing. I would really appreciate it!

@@NINEPOINTFIVEPROJECTS I didn't mean rebuild a different car, I meant get parts from another one for this one. Already subscribed🙂

Yeah that would be nice! Thanks for the Subscription!

Hi thanks for watching and the comments! Yeah its going to require a ton of work and money to get it back to where I'm comfortable with it, but I will eventually get there. I think you may have already but if not please consider Subscribing. I would really appreciate it.

Hi thanks for watching and the comments. I would imagine it would be pretty loud if you removed the muffler! Just leave the exhaust pipe on the engine. Either way I think you may have already but if not please consider Subscribing and hitting the like button. I would really appreciate it.

Hi thanks for watching and the comments. That makes a lot of sense and I think some have drilled a vent hole in the back, but it's sealed from the factory. Either way I think you may have already but if not please consider Subscribing and hitting the like button. I would really appreciate it.

Hi thanks for watching and the comments. To be honest I don't have a good answer for you. I could have cleaned the complete roof first but felt that I didn't want to track all over it while working on the tape. Either way I think you may have already but if not please consider Subscribing and hitting the like button. I would really appreciate it.

Hi thanks for watching and the comments. It was a pretty tough job for sure. Also a bit intimidating. Either way if you haven't done so already please consider Subscribing and hitting the like button. I would really appreciate it.

Hi thanks for watching and the comments. The UPC number is UPC 784848344136 It is $17.59. it's by a company Anurijiadu... Please consider Subscribing and hitting the like button. I would really appreciate it.

Hi thanks for watching and the comments. Yeah the Nub Club! Either way I think you may have already but if not please consider Subscribing and hitting the like button.

Hi thanks for watching and the comments. I'm not sure if the engine is a non-contact engine or not. I guess if it is I was lucky and apparently where I had it out of time was still at a point to where the valves wouldn't hit the top of the pistons.. Either way I think you may have already but if not please consider Subscribing and hitting the like button. I would really appreciate it!

Hi thanks for watching and the comments. The kit comes with adhesive tape already applied to the correct areas. Either way I think you may have already but if not please consider Subscribing and hitting the like button. I would really appreciate it!

Hi thanks for watching and the comments. It was a lot more work than I really wanted to get in to but I did want it to be as good as I could make it. Either way I think you may have already but if not please consider Subscribing and hitting the like button. I would really appreciate it.

Hi thanks for watching and the comments. I hope it helped you with your mower. I think you may have already but if not please consider Subscribing and hitting the like button. I would really appreciate it.

Hi thanks for watching and the comments. I always liked the Pintos and actually had 2 of them a various times when I was younger. This makes my 3rd. This car needs a LOT of love. There is considerably more rust than I was expecting. It's quite a project and I appreciate your Subscription. Going to be a lot of work, but I'm committed to it. Thanks again.

Hi thanks for watching and the comments. I have a nice garage that I could have put it in to work on it but my wife wouldn't give me her spot...😁. Either way thanks again and thanks for Subscribing! I really do appreciate it.

Hi thanks for watching and the comments. It seems to change a lot depending on temperature. Yes I'm not certain but it does seem that the rubber roof does pull away from the wooden roof under it. I no longer own that RV so don't really know how it's doing currently. Either way I think you may have already but if not please consider Subscribing and hitting the like button. I would really appreciate it.

@@NINEPOINTFIVEPROJECTS Thanks for quick reply. Hmmm, interesting, not sure what to think of it. When you completed your repairs, did you have the RV long enough to determine if you resolved those leaks? I am dealing with cab overhang on class C RV, more less same trouble, corners, front/ side window and trims. Nightmare. And yes, I subscribed, will watch some more videos now….

Hi again. Yes I stopped all the leaks and do recommend the Eternabond tape. I just think it expands and contracts with temp more than the original rubber roof. It was not turning loose. The stuff is sticker than anything I have ever seen. I think it's key to clean the area extremely well.

@@NINEPOINTFIVEPROJECTS Hard to say just from video but the wrinkles and air pockets got me seriously concerned. Yah, I got the Eternabond tape it sticks to anything indeed, just very concerned about down the road as I plan to keep the RV for years. Do you live in very rainy location? Roof one year later turned black again. Thanks for your efforts put in video and info provided

I live in central Alabama. I don't know why exactly but the roofs do tend to turn black over a couple of years.

Hi thanks for watching and the comments. I hope it was helpful for you. Either way I think you may have already but if not please consider Subscribing and hitting the like button.

On a golf cart when you let off the gas completely, what causes the engine to stop running? 🤷‍♂️

Hi thanks for watching and the comments. When you let off of the gas pedal, the butterfly valve in the carburetor shuts off cutting the fuel/air mixture to the engine. It also shuts the power to the coil off which stops the plugs from sparking at least that's how I understand it. I think you may have already but if not please consider Subscribing and hitting the like button. I would really appreciate it.

Hi thanks for watching and the comments. I'm not too worried about it. They are really not trusses but are rafters. I only notched one 1 1/2 inches deep. I also have 2 x 4 purlins spanning across the tops of the rafters. I'm confident it will be fine. Either way I do appreciate your feedback. If you haven't done so already please consider Subscribing and hitting the like button. I would really appreciate it.