Відео

Yes, that helps a lot. Thank you very much 🫡💯🤙

Necesito saber cómo instalar la bomba de inyección para ponerla a tiempo

You're a brave man using an adjustable spanner on UA-cam😂

Hi. My 282 lift creeps up when on idle even with lever full down, could it be oil escaping past assister ram seal or any other common failures? Thanks

replacing clutch, new clutch is not marked for flywheel side ?????

Where did you get the air filter please?

Hi. Was the oil You put in the engine 10w or 15w? Thanks 😁

Great video, thanks Andrew. If I need this doing I'll be heading for Alstonefield 😂! How about the older parallel sleeves in the BMC heads? Mine looks like they're soldered in, no leaks fortunately.

Hi, I'm having trouble with my M4. The head is off, and the engine won't turn over. Only moving on slack of timeing chain. No sign of the camshaft moving at all. Is there anything in the guvnor that may of come lose to stop the engine turning over? Its not anything to do with clutch. That's free. I cant of anything else it could be. Please can you advise. Thanks

I don’t have a tractor but a boat 😅 thanks for the tip

What size is the fuel housing o ring im in Australia

Fantastic video. Thanks for sharing. Liked and subscribed. Tar!!

Great video, hoping these how to fix it videos keep coming, very useful

We had a 10/60 model. It was a 1967 model. It did not release the hydraulic pressure on the clutch, but it had a strong PTO shaft and a brake adjustment that was not stable. You adjust the brakes and the next day they would not hold the brakes evenly again.

Hola como estas, por lo que veo es un motor muy bueno justo estoy por comprar un morris con bmc 4 y entre a UA-cam a ver que opinión me da

Where do you get the 2 washers from?

Very interesting, however, how do adjust the gap if it out of spec?

That one is putting out a lot more than one hundred horsepower

Can you show the box filter perhaps? I have no pressure and feat I have to take it all out. Lost pressure instantly.

Good job

Happy Soul in Buteful countrysidE 😅

Fam where can I find a 384 Leyland engine ?

Would you be able to advise / carry out repairs on a m4 that doesn’t govern?

My 342 has depth control added.

Use guide studs..simple!

just tripped over this. I used to work on these and have to say you made it look like hard work! If you get 2 long bolts of the same thread. then cut the heads off and grind a taper on them, they make 2 guide bolts which you fit around half way up. Then put the PTO in gear and turn the output shaft to line it up. The back end will then just slide on the guide studs you made. If you take the top cover off, you can even lift the back end on and of your own on site/a feild if you have to. (Althoiugh I was much younger then!)

Thanks from texas

What are those two leavers on the side for they don’t appear to do anything on my universal four also where do I take hydraulic fluid from for implements and the front end loader and where do I return it, there are bungs but I want to make sure I’ve got it correct

Are these tractor spare parts tractors or customers ? Good video.

Last job grease it...

Can anyone tell me about the 2100 square cab that came out in the early 1908's i have a picture but i cannot upload for some reason.

All you need is a Leyland Boxer to attach it too haha

I have got a4stroke Nuffield I have tried. To time it's not picking

Good work

Not even breaking a sweat💪💪

Rare!!!

Thank you, very helpful..at least I know how it should be done. Mine is difficult to start. Does the use of calor gas help?

T Y, I finally got a large torch onto the housing. Lo and behold the o ring was still in (very crushed) and considering an o ring came off when I took the housing apart, I'm surprised the engine room wasn't full of oil.

Excellent video showing the different oil filters and housings that can be fitted, my Universal Four has a Vokes filter housing and tractor spare parts Ltd was the only place I could get a new filter element from, thanks guys.

The steering gear rotates opposite the wheels wy!?

How is the steering wheel gears adjusted?

In about 6 months time I'm going to be in the market for a 285 or a 2100... My friend can you please give me a ball park figure as to how much a restored Very clean version of each would cost.. Roughly.. Thank you very much..

Hi do you have fuel injectors for Leyland 384

In the video he talks about the two seals, a rubber one and a felt one.. The felt one he says the incorrect part number. He says 7H1785, but I think he actually means 7H1758. Hope that helps someone 😁

Very thorough and well presented.

Some of the blue Leylands were shipped to Finland with Sekura cabs aswell.

The Sekura cabs are also used on the David Brown 90- series and Case 94-series, i have a 1985 Case 1294 and i love how comfortable the cab is and sturdy built! It's very warm and comfy during winters it's like sitting in the sofa near the fireplace while listening to the radio 😄

Sounds lovely ticking over like Swiss watch...... we had two of these back in the day.... 954/854... look after it...👍🏼🇬🇧🚜

Brilliant tractor……

Yeah that was helpful, good video