Відео

Finally someone who realizes molar makes the best blades for their vehicles

My 2014 grand Cherokee 3.6 overheats very easily and I just did a coolant flush and noticed it wasn’t sucking coolant in and releasing air bubbles when filled. I then took it on a very very short drive and it overheated again and then shot coolant out of the overfill hose. I’m thinking it’s the pump. What do you think? Thanks

Thank you for the video! I have a couple of questions for you, if you wouldn't mind. I recently purchased this same mower and wondering if you have positive feedback regarding the differential lock. I purchased this mower to mow my 3 acres and pull a utility cart. My property is a bit "hilly" and is the reason I was wanting the differential lock. It has been my experience so far the differential lock does nothing to help with traction in challenging areas. I'm quite disappointed with it. The dealership does not offer much help in this regard. I'm wondering if I add wheel weights or weights like I see you've added to the back of yours. I can't find wheel weights but your setup looks like it could help. What bracket and weights are you using? Thank you very much!

Awesome video, no fluff, just the necessary details.

I think it because you didn't put the spring back in..

Would you recommend doing the same thing but with tar? Good day to you!

Did a new rear diff in my 11 Hemi overland GC, and a new locking motor, 4x4 light returned 2 months later, so my mechanic ran different voltages though the wire got the motor to work, but thinks it’s a bad wire, so getting the wire checked by an electrical engineer next week

how did the jeep feel aftr changing the fluid ? better shifts?

Finally was able to change my motor and scanned it after clearing and got no codes. Scanned it again to be safe and I have the diff position sensor circuit and actuator code. No dash lights yet but did you try scanning after you replaced just to see? No codes were thrown?

Does it drone on the FWY?

Man, you explain this so perfectly bro! I was struggling with my rear wiper blade on my 2014 Grand Cherokee, until I watched your video. You are very clear on your explanation and showing us how to do this. Much appreciated man! I immediately subscribed to your channel.

Sounds good 👍

Definitely not soending $450 for a mopar one when they only last 60k miles. Going with the Gates $100 one this week. Meets or exceeds oem.

Do they leak? My 2020 charger 5.7 passenger side is leaking

Awesome video 😎 👏

Thank you!

Now thats its two years later have you had any problems with this? everything still doing fine with running the system at a lower level? Any shock problems and bag problems? Any problems with bottoming out the bags at all while driving?

Steve, I have put a spiel in your previous post. A HellCat oil pump will give you a 12% oil volume increase. The new Melling 10452HV would give you a 20% increase, the way to go. I would be cutting open your dirty oil filter to check for metal shavings. I gather you are getting the oil examined. If any metal, the engine sadly is doomed. All the best with this.

I have just purchased the same vehicle, only 22,000klms on it. From Summit I have ordered a Melling 10452HV oil pump. This gives 20% extra oil volume, essential at idling speed. I will also be using 5w-30 Penrite 10 Tenths racing oil, changing it every 5,000klms. Low oil volume at idle is what kills the lifters. I have researched this thoroughly on the web and my mechanic who is ex Chrysler told me straight out, "the oil pump is the problem". This will not fix it, but I would expect to get a long use out of it. Vehicles used by ambulance and police get the lifter failure around 30,000 miles, due to all the idling. With every day standard drivers, their vehicle may fail atound 80,000 miles, some later and some can go on forever with no probs it seems.

I'm actually jealous at how clean and rust free your undercarriage is. Here in the great white north every single car is a rust bucket.

Thank you so much for showing me how to do the rear wiper blade. I just bought a 2016 Jeep Cherokee Limited & I just couldn't figure out how to get the blade itself up.. lol.. You got a fan for life...

I’m about to try this. Are you still happy and no leaks?

Pan change? Ridiculous😐😭

Don't believe the hype change your filters. Change your oil 🤣🤣🤣🤣🤣🤣

Thanks!

WHAT IS THE WHITE STUFF?

Hello. So, I have a 2012 Overland. After 3 days of non-use of my Jeep sitting on a slight inclined driveway, the rear of my jeep sits very low. I can barely put my fist in between the wheel well (if that's what you call it) and the tires on the rear. I have checked with watery soap to see if there are any leaks on the rear bags or elbow fittings of my air suspension, but I don't see anything. Do you think maybe the height sensor has anything to do with this low sitting?

Ahhhh...Stellantis.... Not exactly a step forward in quality improvement on Jeeps.... But this tricky little rear wiper replacement was made easy when I realized, due to your video, that there was a hinge cover at the base of the arm.... Thanks for that!.... My buddy just had to spend $2,500 on his Korean made transmission for his Cherokee, with only 60,000 mostly suburban paved road miles on it ?!.... Jeep used to make really good products.....

Where did you get those instructions

Why would you sit a filter on the ground

I just mounted the all season plow and the first pile of dirt i hit, same problem. Did you stick with this solution or did you change anything?

At 100,000 miles I asked my Jeep dealer to change the transmission fluid on my 2018 Grand Cherokee and they refused to do it. It’s meant for lifetime service and changing it may possibly cause transmission slippage. That’s just what they told me.

Hey man, have been wanting to replace my chrome trim along my fog lights with some nice matte black, what would you recommend is the best way to go about getting the fog light trim out? I tried earlier today and was prying and pulling but did not want to break anything. Thanks!

Thanks. Well appreciated

I've never seen concrete so dry

That is some dry concrete mix.

you made my day ;-)

The relay you opt'd for would be nice with there rest of the parts list. In my case, the lights i bought came with looms, relay and switches altnough i cut them off and used different ones. Thanks for the ideas

Stainless steel worm gear hose clamps work too

Thank you lol

Hello from France, how many pints did you use exactly? 7 or 8 Thanks

Why did you feel the need to change it?

Did the light ever came on

I don't want to do it anymore. Too much headache to do it on the driveway.

what’s the website?

Bro rather smell farts then gear oil, weirdo

Thank you for sharing this I was getting very frustrated and about to try to somehow force it off possibly damaging the wiper arm until I thought about checking for a post on it

mannn fucc these fancy ass exhaust. str8 pipes all day

How come you guys never use headlamps? Grab yourself a Petzl that comes with a rechargeable battery. A little pricey but ive had mine for over 5 years and use it daily.

Having the same issue / codes with my 2017 GC Summit. Has anyone had any luck with a EBay China brand? It’s WAYYY more less expensive.