Відео

Nice work Miller. All the best for the outcome Fantom. 👍🏼

Thank you John. Yes a silver crank like the XTR M900 would have been nice too. A blue set of KOOKA crankset or a CookBros I wouldn't mind too. I didn't like this flat profile look and feel of the Sugino Crank hence I changed it.

👍🏼감사합니다🐝

At the Official WPL website they do sell. Otherwise Aliexpress too. www.wpl-rc.com/products/d12-remote www.aliexpress.com/item/1005005934166395.html?algo_exp_id=e628fa3f-7ff1-489d-9c20-0c9acf617f49-1&utparam-url=scene%3Asearch%7Cquery_from%3A

@@divisionbreak thank you mate

Hi Roy you mean the grey tape at 19:40. That's just a Japan: 6mm MT masking tape. I wrap a tape there was to let the (shaft end plate) sit more snug-fit (tighly) on to the shaft end. You can also use any ordinary tape too if you find your end plate sit loosely at the shaft end.

Nice...👍🏼

Is it still stable at high speeds?

The stability of the board depends on how tight or loose you adjust at the Kingpin Nut. You don't want to over-tighten to over stiffen the board. Neither you want it too loose as it will be wobbly. The set up there has a very well-balanced of stability.

Thank you phillip. No the fork is unadjusted. I did not increase the knobs at the fork. Neutral.

Thank you very much Eddie. Nope no glue was neeeded. Only Loctite-Threadlocker for some screw joints.

@@divisionbreak Cheers dude!

The Trek 9900 OCLV Pro Issue 1995 was a head turner. I remembered my friend had one. It feels out of this world when it was released. Extremely light and the subtle carbon textured details was amazing. The 1995 Trek 9800 Pro OCLV purple color one is beautiful.

Thank you Alex : ) 👍🏼

Thank you bikerebuilder 👍🏼

Thank you for watching kz6nc. If you are going to redo the paint job for your suspension fork too try a stronger primer. The one I used in the video had some paint chipping off later. Try this or other brands instead: www.mr-hobby.com/en/product2/category_33/1872.html

You are welcome anytime touchstone64. Thank you for the kind words. And yes you are correct. Get yourself a new power adapter if the original one is what you will be using. Because they have been around for 2 decades. My blue LED started to get dimmer and dimmer, day by day, night by night till it just cut off sound/music all by itself but comes back alive when you hit the switch off/on again. I am living in South East Asia we use 3pins plug here same as UK. This is what I am powering now for my Soundstick II. www.aliexpress.com/item/1005004368708918.html?spm=a2g0o.order_list.order_list_main.434.51e718022tELro

@@divisionbreak ordered 👍 Again, thanks for your insight and for being so helpful 🙏

Nice. The new power adapter will definitely deliver a sonic impact for the HK soundstick for sure. It's my pleasure to help. All the best, take care & enjoy the music. : )

@@divisionbreak yep, certainly sounds great! The new power adapter hasn't had an impact on the LED brightness though, so I'm going to disassemble and have a look at the components 👍

You are welcome bro : ) 👍🏼

Thank you very much Cycling Inc. 👍🏼

Thanks aplerenkaradeniz : )

Hi ronnie the original riser pads provided was really hard like some kind of cheap plastic material. The Carver riser pads have better cushioning and is quieter. Means it can absorb more vibration better than the original pads.

Thanks for watching madi : )👍🏼

Thank you for watching Ronald : ) 👍🏼

@divisionbreak you got it brother. Love the old GT'S

I hope I can find a set of white industries hubs. I'll re-do a new set of rims set up video: white industries hubs, panaracer tyres, spokes, spokes lacing...

Nice!...I am hoping for a set of White Industry Hubs too, 517 Mavic rims, Panaracer Smoke/Dart tyres. The 1995 Answer Manitou 4 / Magnum / EFC DH Forks are beautiful too. Thank you for watching Legodad. : ) 👍🏼

I just put new tubes and tires like 2 days ago and this video popped up! It’s a sign

Indeed 👍🏼... I am changing new rim tapes for both rims right now. My inner tubes started to blow from the inside on separate occasion. I suspect the spokes that are protruding and the deteriorated old rim tapes are adding some pressure to the tubes causing them to puncture. I got these: www.aliexpress.com/item/1005005444716181.html?spm=a2g0o.order_list.order_list_main.5.6e5e1802cZizYy

Thank you for watching Noel. 👍🏼

GT LTS-1000 DS that arching seat stay tube...that is a classic piece too. Another dream bike of mine was the 1994-95 GT TEAM LTS the one with the Fox Alps 4 rear-sus. Thank you for watching Igor. 👍🏼

Thank you kev. 👍🏼

Thank you very much pixellord1.👍🏼

I have added the link at the description.

​@@divisionbreakthanks bro

There can be many issues occured when you are removing any turntable's tone-arm itself. Not necessary the new V blocks causing the problems. There could be cables entanglement beneath the Arm Mounting Collar. Rewind your steps and pin-point the fault. My bet it is the cables below causing the restriction.

Liquid Acrylic Glue

Thank you very much Jonathan. Glad I could help. : )

Thank you.

You are welcome fencer. I am glad the video inspire you to bring back a 30 over years Schumacher back to life again. Perhaps you can present the buggy here in youtube later when you have finish building one day. My first & last buggy was a red Nikko Turbo Panther back in 1986. 37 years later this is my 2nd RC Buggy. Let's ride again......

Rubber has always been the "original" material used ever since. No grease no oil please. That will deteriorat & destroy the rubber. Till today I have no issue with nothing added to the V block.

Nope. The Tynee Ultra original set up is still better 7inches, 43°. If you swap to a 9.5 inch it is too wide you wont enjoy the ride. The ride will be stiff, too balance, too monotonous. On the contrary you want a board that is lively and controllable at your will.

@@divisionbreak thanks👍

You are welcome darryl : ) 👍🏼

ne vous inquiétez pas, c'est particulièrement bon pour le premier démarrage afin que la graisse puisse pénétrer dans le matériau... elle sera nettoyée plus tard après un premier rodage. Je n'applique plus du tout de graisse maintenant : )

Yes my pulleys are purchased from TYNEE but my wheels were bought from a local skateshop. I don't quite understand when you say yours don't sit flush with the wheels.

Can you try remove the counterweight & the balance weight & the front head shell and re-set up them to the tone arm again.

Hi Wils the RipTide pivot cups & Caliber II are the same formular WFB Urethane in 96a offer smooth turning. But I don't know what is Paris V3 dimension. Because earlier what I did was I removed the TYNEE OEM pivot cups & took it to a skateshop to compare the dimension with what the shop had there. And interestingly the Caliber II share the same dimension as the TYNEE Ultra OEM pivot cup. I didn't compare with the Paris V3. They don't have it.

@@divisionbreak I see, that makes sense thank you! I actually ordered Paris V3 pivot cups intuitively, and noticed that they indeed sit more shallow in the truck because they are a bit shorter than the stock Tynee ones. Upon test riding, they felt a bit unstable as expected. So I think your spot measurement was on the money! I just ordered the caliber II/III ones you linked to try those instead.

​@@wilsgrant If it is a little short by 2-3 millimeters I believe it still can perform it's task wont be wasted.... Let me know too how it fits when the Paris V3 arrive. Remember to shave some candle wax into the cups too before you assemble the hangers.

Приятно... Лично я считаю, что Lenco нейтральный и теплый... звук приятный для ушей. Легко настроить, не сложно в эксплуатации. Очень щадящий проигрыватель. И он непредвзято относится к музыке. Вы можете играть джаз Билла Эванса и наслаждаться им позже, вы можете играть электронику или вокал и при этом чувствовать себя удовлетворительно. Спасибо за просмотр и берегите себя :)

US 8.0

@@divisionbreakесли женскую расцветку взять на на мужскую стопу не узкие будут?

Если этот дизайн предназначен специально для женской пары, то для мужчин он не подойдет, он будет очень узким и маленьким. Не смотрите на женский фасон или дизайн. Внимательно проверьте описание продавца и придерживайтесь мужского кроя и дизайна/модели.

Very good. Reliable. Easy to clean, easy to swap wheels out whenever, whichever you like, easy to find 3rd party parts to upgrade or make replacements. The controls & board behaviour is good = natural/organic. Good & friendly support from the board company. And most importantly it brings a smile whenever you go for a ride...it's pure fun & joy. And the price tag for all Tynee boards is fair. Just go with the Belt-driven board you wont go wrong. : )

Hi Jason I believe the WPL D12 & the D42 both share the same chassis design / specification. Aliexpress RBR/C had the chassis for sale. www.aliexpress.com/item/1005002951569959.html?spm=a2g0o.productlist.main.5.5246JuGoJuGoh5&algo_pvid=c09ff70a-1779-432f-8eb7-702fb18565c8&algo_exp_id=c09ff70a-1779-432f-8eb7-702fb18565c8-2&pdp_npi=4%40dis%21SGD%2171.07%2171.07%21%21%2151.34%2151.34%21%40213bd97f17071869578177828ecc6a%2112000022931779170%21sea%21SG%212385884405%21&curPageLogUid=cDdhj5drnucP&utparam-url=scene%3Asearch%7Cquery_from%3A

Nice...

Nope. So long they are well-balanced whichever...... it's fine.

Disassemble the whole sub woofer. Check the 2 cables/connectors at the small white rectangle plate if they are loose with the male connectors. Check if there are any corrosion too. On & Off bass sound like a loose connection somewhere. Otherwise it could be the power suppply too. Check when you power on the adapter if the Blue LED remain stable. If it blinks or go on and off for no reason while playing. You might need to buy a new power adapter.

@@divisionbreak Thank you for the comment, will try!

The HACKMOTO V2 17T 540 brushed motor is very good. Smooth. Fast. When you pull the throttle it response very well. Torque is good too. It is a very well balance motor.

Thank you. I just ordered the Cougar myself. Will you make any modifications?

Nice. It's going to be a very nice build, just take your time grab some coffee and don't rush to the finish line. All Schumacher's vehicles instruction given there at the manual are very concise. You just need to prepare the right tools (Phillips screwdrivers, MIP Hex 1.5mm, 2.0mm, 2.5mm) Actually the box kit does come with the standard Allen hex keys tool. The tricky part is the spring clip for the servo. You can check that out from my earlier build video. Modifications? No I didn't do much modifications at all....The only thing I changed was the x4 Wheels /Tyres. They were from JCracing.

@@divisionbreak Thanks for the advise. I havn't built a schumacher yet only Tamiya and Kyosho. I'm currently building an Optima Mid which is very nice.

You are welcome Nixx. Same here. Neither I have build a Tamiya nor a Kyosho buggy before. This is my first time building a 2WD Schumacher Cougar & thanks to the kind & approachable Schumacher's staff for their advice and help when I ran into some issues earlier. I hope I can get to build the 4WD Schumacher XLS CAT dream buggy one day. I see you have the OPTIMA MID...that's a nice one.

Thanks shimmy : )

Thank you very much mlugin.

You mean the lower body of the sub-woofer? Or do you mean the edges of the speakers?

@@divisionbreak the edges of the speakers

You need to use a pen-knife and keep cutting/scrapping the plastic groove with some controlled force/strength. Eventually you will be able to pry open fully the whole cover. That is the only way to do interior cleaning/change new set of tweeters. Take your time and have patient for cut you will get there.

My advice is later when you are done with the cleaning or tweeters change. You dont need to get the acrylic glue to re-seal the cover. Just get some clear scotch tape or masking tape to tape up the covers will do. I am using the tape method now too because you can open up and do cleaning or fix the speakers when they pop out sometime when you drop/bump the speakers.

Yes. 4800KV 25A ESC Servo Surpass Hobby. I just added a link at the description.

Thank you mulgin. This was my first Kyosho & also my first RC car since I was a kid.

Finally. You are welcome Gi EF.....& Merry Christmas to you 🎄

@@divisionbreak Merry Christmas bro!