Відео

Testing while the second key is within an inch of the first key....what key is the immobilizer picking up?

My 2015 having same exact issue, but if I replaced TCC solenoid, transmission filter, fluid and still have same issue. What is the issue?

My buddy is having same problem. Just changed the crank position sensor. Nothing, cranks but is not firing. His is a 96

I have a 2019 Pacifica that this happened on and the Dealer replaced parts and still broke. My step son's room mate is a real mechanic and fixes these types of problems all the time and was able to fix the issue. Thanks for your video.

On Star Trek, Scotty would always apply 10,000⚡️ volts⚡️ clear the circuits. It always seemed to work!🤷

I he'd the same problem we just had a lot of rain and my top connector was wet

Thank you

Help me out..... on say a Chrysler jtec pcm, how do i hook up thr gt100 on the comm wires? Do i use 2 of the yellow "obd" labeled wires across both pci corcuits? Im lost on which wires to use for communication circuts and how. Thanks for the help

Should have found 12volts on that pin 3 with key on. If not should have found out why before spending the customers money on a gamble new steering rack 😮 And how about plugging it in as well before saying it wont communicate 😂. But enjoyed the video

Where can I get those wires for the splice pack?

What Autel is that? Can you provide a link?

Hey master, any experience with “Smart Key Not Found” on a Jaguar? I’m battling with a 2007 XK X150 and running out of ideas. Any light you can shed? Thanks!

Hey master, my MS Can voltages go up to 4.3-4.6 sometimes….is that acceptable or sign of an issue. I’m fighting with a 2007 Jaguar that doesn’t see the smart key but works on the emergency slot that runs on the LIN bus. Keyless Module runs on MS Can, accepts software updates but when is time to program the remotes doesn’t see them. Check RF receiver voltage and serial data connection and is good but have no idea how to test it.

Thank you Sir, the most methodic common sense diagnosis video I’ve seen.

Ok same vehicle no DTC’s and tach not moving??

Great video!!

I really need more of is here

Part 2???

did u ever figure out which diode was shit and back feeding?

Great video. My 2016 GC has the exact same issue. I trust this diagnosis fixed the issue but would love a confirmation.

Very nice diagnostic procedures

So it's Bosch k-tromic e port injection

Nice

I have a 2016 golf wagon TDI MK7 dsg. Sometimes my steering is hard to turn, but in a moment, it will return to normal. However, if I'm turning hard left or right, it stiffens and loosens again. I'm not sure if it's a battery issue. I don't have the start/stop system. The fault code shows it's a battery terminal, but upon checking under the hood, it's all intact with clean terminals. The alternator is good. Sometimes my idle goes up to 1000 rpm in traffic. Maybe you can help me with this problem.

Quick question on the HS2 or MS network pins 3 and 11 @ DLC(gateway module)on a 2019 F150. With battery negative removed I have 60.2 ohm's on pin 6 and 14. On pin 3 and 11 I have 40.4 ohm's. The SCCM and Gateway module have the terminating resistors. If i unplug the DLC(gateway module)i get 120 ohm's at DLC on pin 3 and 11. With DLC plugged in and SCCM unplugged i get 61.4 ohm's. With the DLC and SCCM plugged in it goes back to 40.4 ohm's. However if i unplug connector C238 it goes to 60.1 ohm's if that makes sense to you.

Can it be reset

Great video

Great Video! Im having a low Blower issue...I turn knob to MAX cool, its loud but NO air. any ideas?

I’m dealing with the same thing right now! Except mine will turn the starter over once then stop. I checked signal wire going to starter and it’s hot for that once over then dead. Truck is driving me insane

He ended up replacing the starter motor. There is a follow-up/Part-2 video titled "2000 Nissan Maxima Intermittent Crank/No Start (JJ's Race Car) Part 2 FINAL".

Good video. Had this same problem in my 320i. It was a big struggle to come to the conclusion that the alternator was causing the idle dips and rich trims near idle. Hope this video can help more e46 owners who have the same problem.

Just wanted to say thank you very much. We were 1600 miles away from home with RV and this video saved at least two weeks of hotel bills waiting to schedule a mechanic. Thanks again.

Thank you for this video. I had a service shifter message, they did change the shifter. Came back on within days, then started to get the Stability Control needed service and check engine light. Just swapped out the CAN Connector and it is working great! Thanks so much for this video. I have a 2019 Pacifica Limited.

From Bimmer tech to another bimmer tech, you did great, watched all parts, you would not believe how many DME i replaced, huge mistake BMW did is, they didt put any fuse between DME and valvotronic motor, so when Valvotronic goes out, it takes DME with it, expensive repair. Keep up the great job.

I had paid so to clean out intake, replace egr cooler and valve, reprogram PCM, replace intake gaskets and map sensor and after 4k. Still getting p0402

Hello sir im having issues too j2534 pass thru failure it connect and disconnect after 5 seconds!!! Any fix. Thanks 🙏

So my truck isn’t throwing any codes but this morning my boost gauge got stuck around 35-37 psi and the turbo wasnt spooling and it seemed like it was bogging down or needing to down shift ( I drive the mountains everyday) that didn’t do anything. Once I got off work I looked everything over under the hood didn’t see anything wrong I fired the truck up and everything works as it should turbo spools and boost gauge works fine

Thank you sooooooo very much much had a 2018 Pacifica the shifter would not turn on or shift had a 100 u codes ent straight to the star connection and solved the problem in less than a sec thanks to you sir

Hi this is the best video ever. Where are u located I have 09 vw routan sel 4.0 v6 62TE Code P0792 P0732 Replace trans fluid and filter, Replace the 3 sensors speed, inter.. N a 330 dollar Valve body n solenoid pack N nothing can u help n how much I'm in Fort worth Texas USA.

Is there a email you have so I can email you my problem. To bad you’re so far I am having similar issue

Hi are you on michigan? I hv same problen i need you too come too dearborn hts

What test light is that?

Thank you for this video, it was the voltage regulator for me that caused the issue, i replaced it for valeo original one, the bouncing idle is finally gone

I need a valve stem job any good mechanics in LA anyone can recommend

I got a question. My check engine light came on. It said it needed a map change I cannot locate it. Help me out pls

Ever find a fix?

Hell yeah. As a tech i was lost. Really appreciate your time sir.

Well done 👍

Bro, that stuff is super cool. I always wanted to build a helicopter

Thing looks like it cost some major coin