- 66
- 507 404
Robert L
Приєднався 3 січ 2007
2000 Ranger 3.0 Dynomax Super Turbo Muffler
Sound of the Dynomax Super Turbo cat back kit. Its been on the truck over 9 years, I just had to swap out the muffler today after the old one finally rusted and broke the weld going into it. Muffler part number is 17748. 2.5" cat back kit with a 3" exhaust tip. The truck also has JBA shorty headers and a custom tune. Startup, rev, drop into gear, and back into park.
Переглядів: 1 741
Відео
2000 3.0 Ranger new tensioner
Переглядів 935 років тому
New tensioner assembly installed letting the belt ride much further back on the tensioner pulley and getting it back online with the crank pulley to stop the mystery noise.
2000 3.0 Ranger Noise
Переглядів 2315 років тому
Idler and tensioner pulleys are new, belt is new. Same noise as before I changed the pulleys and belt. I’m going to try pulling the fan and clutch next to eliminate that. I’m hoping it’s not a water pump..... UPDATE: It was the tensioner itself being worn out and causing the tensioner pulley to sit at an angle. It was making the belt rub the ribs of the crank pulley off center and causing the n...
Cleopatra playing
Переглядів 316 років тому
This is Spats and Kamilah's mom finally showing a little more life than just walking around and sleeping.
Brotherly Love
Переглядів 146 років тому
Spats and Kamilah being nice to each other while settling down for a nap.
Nap time in the workshop in Egypt
Переглядів 276 років тому
Spats and Kamilah doing what they did best while kittens: napping in between rounds of chaos.
Playing with Spats
Переглядів 196 років тому
Back when he was little and could fit in one hand. Long gone are those days.....
Spats and Kamilah wrestling, and Spats climbing my leg
Переглядів 106 років тому
Spats and Kamilah learning the skills to pay the bills. And me getting more puncture wounds in my legs.
Kamilah's leap of faith to freedom
Переглядів 166 років тому
We thought we had her penned in finally..........
Giza Pyramids Sunset
Переглядів 2056 років тому
The sun setting behind the Pyramids of Giza in Egypt. Taken from the rooftop of the "Best View Pyramids Hotel" in Giza.
Grammercy, LA Christmas Eve Levee Bonfires 2016
Переглядів 6657 років тому
Grammercy, LA Christmas Eve Levee Bonfires 2016
Honda EU2000i starting 12,000 BTU window unit on Eco thrott
Переглядів 1,7 тис.9 років тому
Honda EU2000i starting 12,000 BTU window unit on Eco thrott
Chris Issak introduces his drummer, Kenney Dale Johnson
Переглядів 2,4 тис.9 років тому
Chris Issak introduces his drummer, Kenney Dale Johnson
Chris Isaak - Baby Did a Bad Bad Thing
Переглядів 7169 років тому
Chris Isaak - Baby Did a Bad Bad Thing
Harbor freight flux core welder fan upgrade
Переглядів 1,1 тис.10 років тому
Harbor freight flux core welder fan upgrade
1996 Mercury 200 Oil Injection Pump Drive Gear
Переглядів 10 тис.10 років тому
1996 Mercury 200 Oil Injection Pump Drive Gear
Gramercy Levee Xmas Eve Bonfires 2012
Переглядів 39011 років тому
Gramercy Levee Xmas Eve Bonfires 2012
Help me out. Did the strut find a girlfriend? What does this mean to me?
Won’t do my 8000btu 115w portable a/c🤷🏼♂️
YOU ARE MISSING PARTS !!! There is supposed to be a top hat / washer missing 🤣
Not on a 2nd Gen. Why does the oem upper mount, from the factory, look exactly the same as this, just with stiffer/better rubber in the bushing that doesn’t flex?
I have the same thing on my driver side KYB mount - about 1 year after install which is nuts. Solved the issue by spraying AT-205 on the rubber. Spray, let it soak, spray again, let it soak. Repeat when noise re-appears.
Looks like bad workmanship
Is it even a kyb strut mount? it looks all wrong.
KYB complete strut assemblies.
My dad's favorite Christmas song. he would sing this around the house every Christmas season 70s, 80s and 90s. I miss him. He had the best taste in music.
Willie Nelson wrote it for Roy Orbison. And then Randy Travis and Chris Isaak Performed it just as well as anybody along without Elvis.
forgot to put washer lol
A 2006 CRV does not have the top hat/washer. There is a steel collar under the nut that the rubber is bonded to like a control arm bushing. It looks like newer ones have a different setup, but not a 2nd Gen. I changed the upper mounts on both struts to OEM Honda upper mounts that have much stiffer and better quality rubber and haven’t had any problems since.
usually rhat is the culprit with macpherson
this is the dumbest vid ever, you are lucky to be alive and should never work on cars. All thats holding it in is the rubber. You used all the parts on the new mount and you forgot half on this one.
No bushings no washers. This is installation problem
its definitely missing parts it needs a top cap i think its called
That’s a direct drop in replacement strut. There is no washer or top hat to install. The rubber that KYB uses got soft and gummy in 4 months. I swapped in oem upper mounts with the same exact setup with no issues.
ive looked thru a bunch of forums and everyone says kyb is gr8...especially the agx....strange to see a bunch of comments saying otherwise
I've used KYB gas adjust shocks on a number of vehicles over the years and I have to say they are awesome.The only time I've ever had any problems at all was when I installed KYB shocks on the back of my Nissan 300Z.The new shocks didn't come with a dust boot on them and as an experienced mechanic I should have known better but I installed them anyways and I had a long dirt road that I lived on.Sand and mud got up and around the exposed piston shaft,so they only lasted a couple of months.
No dust boot? Why? I bought excel g im scared now that I might have installed it without dustboot toom if its so important why didnt it came with dust boot
😂 That's the strut mount! Not the strut.
I’ve noticed this about KYBs rubber it deteriorates very fast on their shock bushings too
The sea my second home.
I installed KYB on my car, and it is really tough to be surprised that it is the same price as the original one at the Toyota dealer
And what about its quality? Is your vehicle becoms harsh over the bumps?
@@camryle5590 Yes, some things are harsh, so I recommend Monroy aids
@@camryle5590the original better.
Brother where is the washer that goes under the top hat retention nut
He seems to ignore your question.... Shows the ignorance.
That nut is hard up against an inner steel insert that is bonded to the rubber. Same as the OEM mounts. If there was a washer over all of that, it would make the entire upper mount a rigid piece.
I've never had these problems, you just installed it improperly. I took my 4Runner all throughout the country and beat it mercilessly without issue so this is your handiwork, buddy, not theirs.
The rubber in the KYB mount degraded that fast. I bough OEM Honda upper strut mounts and swapped them in. Been perfect ever since.
@RobertL78 Musta been a shitty batch, that's really weird.
do not buy kyb, crappy product, I got them from partgeeks on 2015 accord, a pair of rear, start clunking on every bumps
KYB have a great quality products. Only issue I see the KYB strut mount.
How can I tell if it’s the struts or the mount ? Am getting a funny drive and I put in my struts 5 months now
The base is rhe problem, not the struts.
Did you install the mount with an air hammer?? It's too tight that's why it failed
your supposed to do it with hand tools right ?
@@kaineshorts1783yep
@@kaineshorts1783With a torque wrench 🌚
Which model of vessel is this? All i know is her name, (Arata?) But not the model/make
So do the just decompress in there or do they live there while waiting to dive back down. How long can they live in there if so?
WHO DAT DERE OVER DERE ACROSS DA RIVER DERE
I like the way they port the exhaust right out the side.
installed poorly
nice
Don't buy KYB strut mounts.
Put Honda OEM upper strut mounts and they are working perfectly.
Thank you, I've learned it the hard way.
mount is problem
Where are the base frequencies?
Quantos HP? ?
Thank you so much for this! I'm ghostwriting a book for someone who did surface and saturation diving. He'd been trying to explain the med-lock to me, but I was having a hard time visualizing it. Thanks to this video, I can now see exactly what he was trying to explain to me. 😊 I know you posted this over 10 years ago now, but that was actually towards the end of his diving career. Just a few months after you posted this, he had the diving-related injury that ended his diving career. So this would've been the med-lock as he experienced it, even if they've changed it over the past 10 years. Thanks again for this video, y'all!
What’s the book called I’ll buy it when it come out
What happen to my car
Enny one know about a 3208 engine block in 210 hp non turbo like to sell
That's got to be a Louisiana style workboat
It is.
Though they were supposed to be hung or mounted? Not sure if the bases are hurting or helping. Also rounding the corners and offsetting the mounting position helps. Check out tech ingredients. He dove real deep. But now the daytons are sold out on Parts Express :(
Sounds like stock
Oh funkln well done!!!
I bet guys who fart a lot are popular during decompression.
The Arata at Romeo!!
Kinda looks like it
One of my favorite christmas songs!
I’ve seen a dozen builds of these and this is the first time I’ve seen this design with the base. They look great, sound great. Might actually have to build a set.
Sounds pretty bad. Next time try a Wheaties box.
Hahahaha.
The commentary lmfao. I would be scared as hell seeing this though.
Wiring
you must have a real job... I'd give my left nut to work out there. away from it all..
On the various sites I have explored on DML speakers, far better range and quality is achieved by independently hanging the panel rather than anchoring it to a base as seen in this video. Of course, it is impossible to gain a true perspective based on the microphone used in recording these panels and the fact that what is being heard is over whatever speakers the listener may have linked to their computer.