- 5
- 27 416
Jacob
Приєднався 15 січ 2007
Edifier R1855DB Sub Out volume problem (+T5 subwoofer)
If you'd like to hear just the speaker sound, without speaking here it is:
ua-cam.com/video/Ler33SEh4SM/v-deo.html
I have a problem with Edifier R1855DB Sub Out volume. It might be a common issue, since some people reported the same problem on reddit:
www.reddit.com/r/BudgetAudiophile/comments/r1tvgt/edifier_r1855db_t5_subwoofer_cant_get_it_right/
www.reddit.com/r/BudgetAudiophile/comments/pu6qvz/comment/he4m015/?context=3
UPDATE:
Since Edifier didn't confirm that this is a manufacturing issue, not a design flaw, I returned both R1855DB speakers and T5 subwoofer. It might be incidental but I didn't want to risk it.
ua-cam.com/video/Ler33SEh4SM/v-deo.html
I have a problem with Edifier R1855DB Sub Out volume. It might be a common issue, since some people reported the same problem on reddit:
www.reddit.com/r/BudgetAudiophile/comments/r1tvgt/edifier_r1855db_t5_subwoofer_cant_get_it_right/
www.reddit.com/r/BudgetAudiophile/comments/pu6qvz/comment/he4m015/?context=3
UPDATE:
Since Edifier didn't confirm that this is a manufacturing issue, not a design flaw, I returned both R1855DB speakers and T5 subwoofer. It might be incidental but I didn't want to risk it.
Переглядів: 18 256
Відео
Billiard table, made in blender
Переглядів 8 тис.15 років тому
This is a billiard table I made in Blender for my computer graphics classes.
Blender physics test
Переглядів 23315 років тому
This video shows how blender physics work. Exploding ball is made with particle system.
It’s because of the standby feature, you have you increase the volume once to get it activated again
@@deepitkujur5486 No, it's not that.
@@burnsnewman ah ok, cuz i just ordered a t5 and I’m now scared.
@@deepitkujur5486 Maybe yours will work correctly.
@@burnsnewman ok, let’s hope so. Thanks man
i have the same speakers, is it worth to get the subwoofer?
It’s a must to enjoy good sound, the bass is so boxy n boomy for my taste, but mids n highs are good quality. So without sub for me it doesn’t make sense
@@deepitkujur5486 i got the Yamaha HS8 now, yup they're amazing
Those are r1280dbs
No, they're not.
Same problem in A80 ... with T5 i reclamate ...
i have this problem in A80 ...
Thank you for the video! Did you tried to: a. Adjust the "Phase selection", on the subwoofer's back? b. Follow the instructions on the subwoofer's manual, to adjust volume? I think a. "Phase selection" is to blame here. Hence, my question.
I did. Didn't notice any difference.
@@burnsnewman thank you for your prompt reply.
Can you resolver the problem?
I returned both speakers and subwoofer.
Im using r1855db and t5 sub. Its worked. I think yours is broken, have you tried reaching edifier? But my only problem is when i turn off the r1855db my t5 sub making loud "boom" sound ( t5 conected to r1855db via sub out)
To avoid that boom sound, you need to turn off the T5 speaker first before the r1855db, otherwise in a long term it can damage your T5. That’s the basic principle just like you need to turn the speaker first before the mixer, otherwise all the speakers that connected to that mixer will have that boom sound.
Using this with a polk sub at 35% volume all good
How did you connect, could explain the for you connect it with 1855s in detail? Please
@@deepitkujur5486 with a rca cable connected to the sub out of the speakers
@@Lakaguama ok
@@Lakaguama is it better than edifiers on sub?
@@deepitkujur5486 i got the polk because the room is medium size and some review say the edifier is better for desktop use
ok i now am thinking of adding this sub to a set of Edifier R2850DB's.....for movies and TV....your thoughts ?
I'm not an expert, but I'd give it a try. I think adding a subwoofer like the T5 should improve experience a lot, especially when it comes to action movies and music.
@@burnsnewman thx for your response...cheers
No problem with the t3000 speakers just great
One last question, do you know if this problem only occurs when connecting the R1855DB with the T5!? connecting it optically. Or see if connecting it to the R2000DB works without problem
I only tried connecting T5 sub with R1855DB speakers. I didn't try optical connection, only RCA and bluetooth. Same problem with both connections, on 2 different computers (RCA) and a phone (bluetooth). I already returned both sub and speakers, so can't test it with anything else.
Thanks. Very grateful for your response.
I have the R1855DB and I want to put the T5 sub on it but with this information, I don't know whether to buy it. Because if you connect the sub to the R1855 the volume will have problems and it will sound very soft. It's not worth much
Can't you try it out and return if you're not happy with how it sounds? In EU there's a 2 week period to return your online purchase, without providing a reason. Don't know about other regions/countries.
their is the db S speaker ... with line out for subwoofer ..
These R1855DB speakers do have the "sub out" line (as you can see in the video). And Edifier support says T5 subwoofer is the recommended sub for these speakers.
im planing to pair this t5 on my DBs edifier speakers i hope its ok @@burnsnewman
your suggestion of putting the line in to t5 first then to the dbs works for me @@burnsnewman im ready for Christmas and new year's party ^^ tnx for the post
must conect blind amplifier 'normaly' that pre-out subwoofer have processed subwoofer i think.
zzz bruh, today i bought edifier r1855db, should i plan buy another subwoofer? or buy edifier t5? lmao, even with same company product, there is a problem? its not even plug and play?
T5 is the recommended sub for these speakers (by Edifier). Maybe your unit will not be affected. I'd buy the subwoofer right away and if there's a problem - return it. I don't know where are you from and how did you buy it, but here in EU you can return stuff bought over internet in 2 weeks, without providing a reason. I actually returned mine after few months and they still accepted the return. If you do that, let me know the outcome. Maybe you'll be lucky and it will work fine right away.
Would you still recommend getting these speakers?? I just ordered mine and I plan to connect it with my pc without any subwoofer
I solved the annoying "T5 goes to standby issue" placing a $10 preamplifier (search for "AIYIMA Updated Amplifier NE5532 Preamp Preamplifier Volume Tone Control" as an example) between R1855DB and T5, to boost low sub out levels (and be able to use remote control to control volume on both). Edifier R1855DB + T5 is a bad combo, due to low sub out of former and no switch to turn off the auto-standby feature of the latter (electric power saving measure following 5 minutes without signal Edifier implemented to get it certified “green”). As sub out is low T5 thinks there isn’t signal and goes to standby WHILE listening to quiet/normal volume music (no problems with loud music listening). I tested T5 connecting it to PC sound card sub-out and it wakes up normally to low volume, therefore the problem is certainly with R1855DB (R1850DB). Owners R1855DB with other subwoofers without auto-standby subwoofers might not notice this issue. Cheaper R1280DB does not suffer of this issue with T5, has different electronics.
great information, but I think the problem is from the R1855DB's sub out that produce low voltage, even I need to maximize 12 inch sub's gain to hear the bass
Did you try adjusting bass knob to max from r1855db speaker itself while connected from sub out ?
As far as I remember that knob only changed bass volume on the speakers themselves, but not on external subwoofer. I've returned the speakers, so can't confirm it any more.
Tripplechecked, still same issue, persists. At first I thought it doesn't, but after double checking can confirm that it doesn't work.
After watching this video I was scared to purchase T5 SUB FOR MY EDIFIER 1855DB. However, after lots of research I finally purchased the T5. And honestly telling you what explosive sound outcome with EDIFIER T5 AND EDIFIER 1855DB with subout cable. The heart and mind will vibrate on the bass and the rhythm of music.
Seems like different units are more or less affected by this issue. I'm glad it works in your case.
@@burnsnewman I used amazon basics subout cable. Instead of the cable i received with the T5 product. That cable is not even open from the packet.
@@rahuljha4292I just bought mine and so dissapointed as the t5 is so quiet if I didnt cranked it up to 90%. I wonder is the problem source come from the 3.5mm to rca cable that came with edifier speaker or you just lucky to get a perfectly fine sub out. If you dont mind, I wish you can help me try out your speaker with the cable came from the box so I can decide to purchase a new cable. Thanks man
@@rahuljha4292 i use the cable came with the edifier T5 in the box to connect with edifier r1855db through sub out.
@@rahuljha4292 I connect from edifier t5 signal in to edifier r1855db sub out
This setup impact sound quality?
If you're using RCA, probably not, but it limits other connection options. For example, you can't use bluetooth or optical connection.
best is to use a dac ... mine i only use my pc for source so its ok ..@@burnsnewman
@@markanthonypraico3099Would you be saying that if I connect my R1855 to the TV via optical, and connect a DAC to the R1855 and connect the SUB from the DAC?
no no need of DAC r1855 has a sub out already @@Cornivus7
oohh but if you still insist on using a DAC for volume control i presume ..id go for pc>DAC>t5 sub>r1855 ....... but for more balanced and no need of super loud out put pc > r1855 > use sub out > t5 subwoofer
Does anyone have this problem using r1280dbs + T5? I’m tending to buy this setup and I think this is not a issue with this combo, but if someone did have this problem even with this setup please let me know. Thank you!
same question im having now... how did it workout ???
I have a r1280dbs + T5 using subout and sub works fine.
got it working now ^^ r1280dbs--> t5 works for me too @@ckunha
Please, Anyone who bought a similar setup recently could say if the problem persists?
Yes
With my old Yamaha yst-sw005 subwoofer, it works well, no problems.
Renovation the connections n cables required please
Mine have other problem , all ports are signal in
same issue here. any solution found?
I've returned my speakers and sub.
@@burnsnewmanwhy not keep it connected to the sub like you showed it worked?
You can solve this issue with a cheap preamplifier, see my post.
This problem has been tormenting me for a very long time, I have almost the same bunch of R1850DB + T5 and I wanted to use my TV through SPDIF, but the sub out is absolutely useless, the subwoofer practically does not work, but if you send a signal to the subwoofer, and from it to the speakers, then everything is fine, I might have calmed down and left this connection option, but I want to use the digital output. Are there any ideas how this can be solved and is it possible at all
You can solve this problem with a cheap preamplifier, see my post.
I have the 1850db. I had a setup with a creative labs X3 with dedicated sub out and everything was working smoothly. I switched to a Loxjie D30 DAC and had to use the sub out from the edifiers : same issue as yours! I guess I will use your routing trick. Thanks!
I bit the bullet and bought it anyway. The sub out signal has still enough power for my small apartment room, but I would'nt believe it's powerful enough for a living room, let alone a home cinema. I've got my volume set at 12'o clock Once I switch the input it can get very loud, as like in the video
This setup impact sound quality?
I have a pair of 2750DB with the same issue. The sub out is no useable.
Just posted a solution using a cheap preamplifier to boost the sub out.
Did you ever tried to invert the phase?
I did. It didn't do any difference.
That is why getting a dac would resolve this issue.
did this and also got a dac for easier volume control and bluetooth
Same issue in my setup :(
13 years ago - still looks decent today, just needed a speed-up in time, is all. I just got done making my own, but I don't think I'll be able to animate it. Well done.
tutorial please
Hey ! Anyone knows ?? How to bounce the ball from the wall ?
how did you that ? I mean why this balls bounce from the walls ? When I create my own scene the balls stick to the walls . . . how fix it ?
@burnsnewman ooh ok thx
@moealtalol No, I actually captured the motion from Blender Game Engine.
Did u animate each ball individually?, cool animation thx
You mean the textures? They're actually pretty easy to make. I'll send you a PM, if I find the ones I used.
How did you get number/color the pool balls? A friend and I are developing a billiards game for a class and I can't find skins of high quality.. thanks
one problem. everything is moving too slow.
Thanks! I have made a tutorial on this and i will post it soon!
I used Bezier Circes. First add a bezier circle in object mode, then go to edit mode and add another circle inside it. Then try adding more points (by CTRL + click) and modifying curve points. Oh, you can add a background image with a blender logo (View -> Background Image...), so you can see if your logo fits to the original.