Відео

Hey there, I imagine that would be fine too, the advice I had gotten was to fill around the pipe like I showed, might be hard to fill all around with the cement. But, could probably have stopped sooner and left more of a gap to fill with hydraulic cement. No issues at all for me so far, been a few years now. Good luck with your project!

Thanks for sharing this, I didn’t see that info from NDS when installing mine. I have not had any issues that I’ve noticed at all, but I did find I needed to let the pieces set for a bit after glue up before moving, took longer to bond than normal schedule 40 pvc.. probably because it’s actually polypropylene as you have advised. Based on my experience, I’m with you on the silicone, would be a little hesitant, maybe some sort of epoxy adhesive would actually be the best route. Let me know what you end up using and if it works well. Hope this was helpful. Thks!

I’ve had zero issues with movement or shifting. Everything still looks like the day I installed it. If I had to do it again I would do it the same way. Hope this helps! Thks

Skimmers: The “port” in mine are threaded, so I used a PVC Cap to screw in with Teflon tape on the threads. Returns: I used a rubber “testing plug”, if you search online or on Amazon you’ll find them. They are very similar to a winterization plug, but heavier duty and won’t blow out as easily. If your skimmers aren’t threaded, a testing plug should work there as well. Hope this helps! Thks

@@SeldomRest thank you 🙏🏻

Less watching please

Less watching please

So far so good, if I had to do it again I’d do it the same way. Sorry to hear your dealing with this on a new one!

The tough stuff? Plug your compressor in and turn the valve off at 30 psi lol wth

And you plug the other end lol, you might want to contact a professionnal for this

It’s really not pitched because of the orientation to the pool deck pavers, but has worked great regardless. Little standing water after a rain, maybe 1/8”, but dries quick. I would do it the same way of doing again.

Yep, they stay in no problem, I’m happy with the decision, been probably three seasons so far and all good

Can you ask in the comments here so everyone else receives the answer as well?

@orestdutko7477 do you have a name of a vendor to purchase link seals from? How are they sized? I'm interested in hearing our learning more. It would seem to also offer an advantage of electrically balancing the potential voltage differential between pool water and dirt / ground surface around pool, to reduce chance of shock!

Exactly, starting the new fence build tomorrow actually, got all my materials delivered earlier this week. All cedar, shadow box fence, gonna put it up and then take old fence down. Bought a big jungle gym club house for the kids, that the real motivation to do it :) also bought the “Mud Mixer” concrete mixer, looking forward to trying it out.

Like what?

My name is Paul the Pool Pro, and I’m here to say Peter the Pool Man is a fraud.

Such as?

Yes would love to hear your input oh great poolmaster.

Yeah what's the point of recently upsizing to 2" pipe, and the reducing flow to 1.5" 2ft from jet? Good diagnosis on problem tho.

It's schedule 40. It can handle that.

Thank you for the very nice comment and feedback! I'm not an engineer, just to stubborn to let anyone else do anything for me :) It's been a few years since this job, and no issues have come it with my repairs. Good luck with your project!

I agree with your logic actually and have not had any issues with installation at all yet. From my research/prep to tackle this one, I found multiple sources that supported the elbow, but certainly not an expert. Thanks for comment, will be interested to hear thoughts from others on this one as well.

My guess is if you install the elbow horizontally, any downward movement of soil would exert a twisting force on the pipe rather than a sheer force.

@@seephor I don't see it as twisting force at all. I do see it as a lever force, though, as opposed to pure shear force. But we all know the amplifier effect of a lever. So I still do not see value in adding an elbow and going down, to another elbow going out (back away from wall) as having advantages outweighing the drawback. Arguably if the assumption is, by going deeper, then you *may* be subject to less soil movement on the soil that is deeper. In particular if you were just above Frostline and went down and back to get below Frostline. But I'm in TX where we really don't worry about such things.

@@jamesbsa6450 What I meant is to elbow to the side, not down. If you elbow to the side, you have given the pipe some room to move down without breaking because the downward force on the lateral turns into a twisting force through the pool wall.

Why are you putting a 90 there for no reason?

Hey there, thanks for the comment and question. I should caveat that I am not a pro, just a DIY guy, so there is a lot I don't know as well. I would recommend (if you haven't already) watch the videos that Torque Lock has posted, they show some being installed when the entire pool is not being refinished. I think will be basically looking to "patch" over the hydraulic cement with a plaster finish that matches your current pool's finish. Regarding the waterproofing membrane, this is a brush on compound that just further helps to cover the repair, we used a product called "HEY'DI SB", and the number on the bucket is "TL1941505". Hope this helps!

Hi Carol, thank you for the nice comment. I don't actually have a company, just do this stuff DIY for my personal home. I love a challenge and figuring things out, but I also hate paying other people to do stuff :) Hope the videos are helpful!

Negative, neither of my skimmers are plumbed with any secondary lines, single suction line each. I actually use the Tiger Shark electric robot vacuum that has built in filters, it works awesome! I prefer this to minimize the junk going into my filter which is also a cartridge filter. I don't have to touch or worry about the filter the entire season. I have a leaf net vac that a garden hose hooks up to that I use in the fall once leaves start falling before I get my cover on.

Thank you for the nice comment! I have my drain connect to a buried downspout 4" pipe and just have the end open still. Depending on where you run yours to, they make various grates or covers for either PVC pipe or corrugated drain pipe as well. If yours is installed in an enclosed patio you may even be able to use some sort of screen or hardware cloth wire on the end to keep stuff from crawling in since you shouldn't have much leaf or debris getting in the channel drain. Hope this helps, good luck on the project.

Hey there, thanks for the comment. If your talking about the "extension fitting" from around 3:30 in the video, I got that at a local pool supply company in St. Louis called "R&S Pool & Spa". If you're looking for the actual return fittings, I just ordered those on Amazon, Link below if it works: www.amazon.com/gp/product/B01LXPUL93/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 I just friction fit those in, did not glue them in place at all, so when I winterize I just pull them out with a pair of channel locks and am able to insert my rubber plug in the smooth return pipe. Works great for me.

Hey there Will, thanks for the comment. I've been very happy with the drain and the performance so far; no issues at all with setting, rising or movement. The only consideration or call out I would make is that my installation required the drain to be basically "Flat" from end to end because of the paver deck layout, this isn't a huge deal but because of this the drain will hold a shallow amt of water after a rain. If I had to re-do it, I would do it the same way. Let me know if you have other questions or thoughts. Thks!

Hey there Andrew. I'm starting our 3rd season since making the repair, and no issues at all so far, no bleed through or any signs that there was a crack or issue. Regarding your question, I would think you could successfully make the repair by containing your "demo" to the staple template footprint as long as you are able to get to the actual pool shell and not just to the plaster. Since we were doing a complete renovation I wanted to make sure to remove any remaining plaster around the crack in case it had become compromised or loose. I do think it would be a good idea to use a crack chaser blade to enlarge the crack regardless. This isn't something you want to have to do more than once, so I tend to air on the side of overkill. If I had to do it again, I would do it the same way and use the torque lok staples again for sure. Good luck, let me know if I can help further. (Keep in mind, I'm doing this DIY too).

Great to hear! Thanks the comment.

Thanks for the comment! Glad it was helpful!