Відео

What I would like to know is did you put anything on the back doors of the trailer for escape

Hello. Can you help me because I'm getting a Zoom H6 and I don't know who to ask. What do I need if I want to use a mixer similar to the one you have in this video to record our group's vocals and music? THANKS

Thanks!

Bro wherr did u go to school. I know u

SO DAYUM WEEL EXPLAINED ! wow that you man ! i was searching for exactly what you've explained ! step by step the why and why not, does and dont ! Thank Ryan !

Can the HDMI output of the Atem Mini pro only work with a monitor or can the output work with a normal TV?

Hi, can the ZoomH6 record from its USB to my turntables USB connection ? Cheers.

My Turntable has USB , Can I record directly into the zoom H6 USB connection ? Ie USB Turntable into Zoom H6 USB ? Much appreciated

This was great! Thank you it gave me the confidence to tackle this project on my own

I have a 12 year TV with no Bluetooth but haven’t been able to transmit to Bluetooth earbuds

👌👌👍👍🌹🌹🙏🙏

updated the 19.2 version in fairlight bus format , i see only add main busbutton. the option to add sub bus is not there how can i add a sub bus/mix in bus format ,the button for sub bus disappeared. please let me know

I noticed you went below the steel plate so essentially it’s only attached to the sheet metal?

Cool!

How can we contact you for help

Cool review .. I need that for my livestream using wireless headphones plug on Audio mixer

Question? can I use that transmitter plug on the music audio mixer then connected to my Wireless Headphones??? For wireless headphones livestreaming

Wait what? I re-watched this video and now I just noticed a strange comment by you: "you technically can't have a unbalanced mic pre-amp" or "you technically can't have a balanced mic pre-amp". Both these sentences (so with or without the mis-speaking and correcting) are strange to me. Amplifying and balancing are two separate things that have nothing to do with each other. So I do not understand what you are saying here. balancing and unbalancing is a method of transporting signal over a usually longer cable to cancel out interference that the signal could pic up during the transport. A pre-amp is simply an amplifier to boost the signal from microphone signal strength to line level strength. So balanced or unbalanced signal have absolutely nothing to do with the pre-amp. Very technically said the signal going into the pre-amp is an unbalanced signal because the un-balancing is done before the signal goes to the pre-amp. If you really understand what balancing is then probably that is what you meant to say I guess. But with how you said it, it sounds to me that you are combing the pre-amp with balance as being one.

I am broadcasting to facebook and i have exactly the same issue as this stream, video pausing, did you have a solution?

good tutorials, only if maybe can show us how all these affect the voice as an example.

This is so smart! I’m looking to add a wireless to 2 in, to try and get both mics recording separately. Would that work here too?

Anybody know how to control the bass? I was in church yesterday and they sung and the kids love their own bass and they really went deep. On church spearkers it sounds fine but on the stream the bass just cracks up and sounds like noise... How can I rectify this for the next time we have a singing group? I basically want an equaliser just like on a mixer

OK, I'm convinced - I don't want to be swatting flies with a sledgehammer - I'll use a Dremel Tool.

Man , huge . Let me fly you to Vegas to setup my studio ! Having so many sounds issues. Thank you thank you

Thank you

WARNING, this device doesn't have an audio out to monitor, why did BM do this? to complicate things. This is a switcher and nothing more. I rather run sound independently than jury rigging a flawed product. Good review, but people don't need to buy this if they don't want to waste time with the flawed audio setup. I own the Mini Pro ISO, don't even use all the functionality and must bypass the audio completely since there's no way to monitor.

the S3 biggest issue is Presonus don't test the firmware enough. They've rolled out firmware several times that hard crash the console. They also back pedalled super hard on adding insert fx - they 100% through there hardware had more hoarse power than it had and as a result they never delivered on adding anything to the channel strip insert that's actually worth having.

Sweetwater still sells the PreSonus StudioLive 16R at $899. Plus you can use Studio One with it.

One word. Livetrack 20. That’s two

i connected my atem mini pro and the frames are just to slow ,how do i fix this ?on facebook

Yes. I am. using the key given tha youtube or Facebook but still.

Good morning. I have challenges streamin my new ATEM mini pro

So your signal splitter loses no signal, and it's passive? Do it generate power? Quick, you finally found free power! Sheesh

I send a 32 channel Digico console into an Atem for a full stage worth of mics and direct inputs, works fine with same cables x

Would I be able to use the unbalanced 1/4" Jack outputs from a dual wireless mic receiver into the Atem Mini Pro 1/8" mic inputs? If so, will there be any difference in using a stereo cable vs a mono cable (1/4" to 1/8" jack)?

I had no ideal the eq existed. I am so glad to have watched this,,

Thanks. Needed to know the airflow.

Thank you so much. I am using the ATEM Mini Pro in a church environment and the music we were streaming was embarrassing. The knowledge you have provided will help a lot.

Here I am watching right now 😁😭I love UA-cam

Excellent tutorial. This all coming from an audio guy!😂

My is my zoom giving a hiss sound or floor noise when i connect my rod pod mic via xlr? 😢😢😢😢

Anyone know how to downgrade the firmware on the RM32AI. It used to work great until we made a the last firmware update.

After watching your video, I think I've made up my mind to install the foam board. No time constraints and nowhere near the mess of spray foam. You definitely took that hit like a champ. I'm afraid my video would of had a few " beeps" in it 😂

Great video. Thank you. I have been struggling for days with getting rid of a hiss / buzz / humm when running a Zoom F6 through the ATEM. If you have time I'd love to hear your opinion of it: ua-cam.com/video/TO8eJNq6l28/v-deo.html

hi i just bought one for my mixer the sound comes thro brill no lag but if i speak into a mic i get lag about 1 second any ideas mate

Well done sir. I'm a carpenter. I'm looking for ideas and products. It was my good luck to watch your video. You were the third person to use the word hack but you did the most thoughtful approach with top quality results.

So you could use this by its self for a small show(30 ppl max)…w/o a mixer???

Hi. I got a new 4k splitter so i can display to 2 projectors from my atem mini extreme switcher. All went well until about 2 hours of show, everything went black. Initial suspect was that the new splitter caused ground. I recently checked the extreme and it did detect all HDMI input but the output resolution is not okay. Audio and recording is fine. One suggestion was to change the pins of hdmi out. I'm not sure how delicate the pins are and there's no ATEM service center. I'm not super knowledgeable about this. Hope i could get a help from you or anyone? It will really be a big help🙏

Still trying to find a video that shows you how to record at home with these. What I mean is how do I run it through Studio One like a regular interface. Like opening all channels in studio one and recording via the DAW, instead of the studio live program.