Відео

Tightening the stem nut can’t move the trees

That bottom cam chain doesnt work like that, you loosen it and the internal spring automatically sets the tension then you re tighten and go to the fine adjuster up top.

I really like your welding videos too! Thanks

those harbor freight compression testers do not work at all. they do not have a schrader valve. so whatever it said your psi is probably double. I have used one multiple times and they’re always half of what the compression actually is. you should just throw that compression tester away. I went through 3 of them returning them until I did a google search and found out everyone says they’re wrong

Love the sound, so there is still a factory muffler between the headers and the new exhaust KO.

What will happen if I remove the second screw, next to the drain plug? In the manual it says “do not remove screw” I accidentally loosened it and tightened it back up and now I think it drips oil.

That a 1/2 or 3/8 craftsman torque wrench?

You're a beast bro

What the kit brand and where do I buy?

Thanks for the insight. I just got a 1987 fourtrax 70 for my son that needs a top end. Just ordered the same kit you used. It’s been garage kept and in really good shape. It was running good but smoked(to be expected) so I’m hoping the full top end will take care of it. Just another 80’s model Honda to add to my fleet and experience for my son. Thanks again!

I have an xr 100r and I want to know how you put lights on it since it doesn’t have a battery please answer 😢

I have the 2014 that I ride around 4500 to 8000 feet of elevation and it has never ran quit right. So I had Twisted Development remap the CPU. Wow those guys really know what they are doing. No flame out no back fires- it just rips. I can't say enough good about those guys.

good things doesn't have to be too expensive...nice neighborhood btw 👍

Hi if you want to read a motorcycle that is not one off the five on the screen off the scanner do you just go into OBD11 wot i trying to say it is not limited to just the five bikes on the screan can it do ALL motorcycles thankyou

who keeps a Ninja with double mufflers? again complain about it some more !

Did you put a new rear fender on or any new plastics? If so where did you get it

He needs a bigger bike

Just found this video while looking for vids for my ninja 1000 2012. How is that exhaust now two years in? Thanks!!!

Honda oil u fancy!!

Love the walk through thank you! Quick note: I think that oring is for the base of the unit where it bolts onto the tank. Mine is leaking from that oring; so while I appreciate leaving it bolted to the tank is the ultimate "vice " to hold your work.. it should be replaced when ur done😊❤

I’ve been racing my ssr 125 in pit bike races for a full season and have had a blast. Main things I did was a big gun exhaust, nibbi carb, 75 weight oil in front shock, bbr rear shock, bbr foot peg mount and bbr pegs. Otherwise it’s an animal little bike. Takes a beating no issues. GET THE BBR PEG MOUNT. My first race the stock mount bent real bad.

no kawasaki?? man, im trying to find a good reader but i need ktm and kawasaki

I will chew rims for years. I never get that lucky.

Sadly these trails through Quarry Road closed this season. New park and ride in fairfield on martin stream rd.

I wpuld love a street legal suoer moto or dirtbike..jst what I grew up on.. but sport bikes are cool Inkster cant bend to get to those pegs yournall cramoed.uo on a roccket

Xr 100 did well.for.me..was my first bigger boy bike..had a yz 50 then a old 80s xr 80 then the 100..was 4 sroke but I trail rode on weekends no racing and was less mantinence..had big sport bikes got in a bad wreck now a grom with some mods and it reminds me of the xr ev rime I ride...I'm bkessed to still ride after leg being in the ditch and reattached if ypu can beleive it.and ebem more unbelievable now some family say I jst need exercise and I'll snap back been fkn 17 years lol...I try..glad to ride and be alive ...jeeze lol

How often do the valves need to be checked in these bikes?

Sorry to hear that you blew out your acl ! Speedy recovery!!

Is it a slip on or a full exhaust system? Sounds amazing man!

I’m tackling this project next weekend! Thanks for mapping out the stator swap with so much detail. XR 💯

Hi Brandon I’m always looking for someone to ride with and in different places so if you would be willing to have me tag along let me know! I’m 65 and ride a ktm 300 thanks

Is it even worth rebuilding these? I got the same bike and I hear a bit of ticking when it runs I just don’t see it being worth dumping tons of money into it to rebuild

Is it alot of money to rebuild these motors ? I just don’t see how it would be worth it unless your really attached to the bike

Thanks!

Just got a 1996 XR100 for my boy that's turning 11 next month. Thanks for the great video! Very helpful :D

what paint did you use that matched so well

The problem is, we cannot hear the true sound of the cheap ebay muffler because you are testing beside the two strokes cycle.

I got a xr100r too I’ve absolutely loved the bike runs pretty good seems to have low compression it’s pretty easy to kick over but starts 1st kick all the time what are some signs of when the motor is worn out ?

great video. for scanning the road while riding i think of it like the radar in a jet but i add mirror checks as two bars of scanning. 4 front 2 rear. my first check is looking way ahead then closer and closer sweeping back and forth and side to side constantly. then mirror left and right checks and continue. then for leaning into corners 25 and 30 mph subdivisions are perfect practice areas as well if they have good turns and not just grid patterns. use all counter steering for the turns and get used to that then practice avoiding spots in the road on top of this i later run the same line with mostly body position to turn with very minimal counter steering to keep bike more upright yet track the same turn you are just wiring all the things into the brain and sorting them then you use them both for certain times. another great trick for intersections anywhere a car can pull out from never look at the car watch the front wheel only and dont focus on it make it a secondary peripheral track. that way if they do come out you see it in the wheel and you know the direction so it gives you extra knowledge at a faster rate than looking at the dummy behind the wheel not paying attention most likely. i always ride in the prepped and ready position on brakes and clutch in most cases as well. thus shortening the reaction time to stop to gear down or up accelerate as well. never can fade from staying sharp on one the moment you realize you have lost focus you find a safe place to pull over and rezone in luckily i dont have that happen but it does occur and we must always stay vigilant in it

how do you know that the voltage regulator will prevent the lithium ion battery from overcharging and bursting into flames under the seat and in between your legs?

HERE ARE THE SUPPLIES I USED: Tusk Street Kit - amzn.to/3XGP5Qg KTM Tail Bag - amzn.to/3WcTv0l Switch Back Turn Signals / Running Lights - amzn.to/3XKrtdI LED Headlight - amzn.to/4bqUbn5 Stainless Button Head Cap Screw Kit - amzn.to/3XK0uyO Stainless Nylon Lock Nut Kit - amzn.to/4cE5OrN Additional Cable / Zip Ties - amzn.to/3zvHiKY

Hello! Any idea on how to replace the electric starter on this same bike??

That was fun! I hope that you do well on your surgery. I would like to see a video on how you do your videos and editing. FYI take it from somebody who knows I have about 10 years on you. Try to do as much exercise before your surgery. Low impact of course. It will help in your recovery. Thanks again for a good video!!

Let us know if we can help. OK?

These bodies don't work or heal as fast anymore once we beat the hell out of it!😵‍💫 . 🙏 pray your surgery goes well, Brandon!

Awesome stuff, Brandon!!! Best of luck with your surgery!!! Hope you have less trouble with this one.

Well done ol’ fella. You’re a sucker for punishment 😂😂😂, both my knees are shot, but atm I’m keeping it quiet from the doctors. I’m their spare parts body 😂😂. After the heart op, 3 cancer ops, liver and gallbladder ops, I ain’t got nuttin left. Knowing my luck they lop my legs off. I used to change sprockets & chain on my H1 at least one a month, rear sprocket would wear out quick. My bike only had 2 speeds, flat out & stopped, but that was in the 70s. Had a mate with a Z1 and I could stick with him to about 90 then he’d pull away. He got a heck of a surprise after I swapped sprockets, he was cruising at about 115 mph and I went passed him so far he nearly got off to find out why his bike stopped 🤣🤣🤣. The H1 would top out about 110, no idea what it was capable of, my speedo topped out at 120, but I reckon I was much faster than that, but never did it again, scared the begeezus out of me. Top job on bike, don’t kill yourself! I’ll never speak to you again if ya do! Cheers to ya.

Totally late to this vid but i have a '24 mt03 looking to lower was wondering how tall is your wife and can she flat foot now? Thank for the video!

Fellow Mainer here, riding to Laconia can be a gamble like last year it rained the entire time and my wife and I took the car. Boy I was so glad we did

And.... We just finished, close to midnight but it is done! It will fit my fiancé much better now. Great video