- 47
- 57 252
cheggers1973
Приєднався 23 вер 2008
Recorded footage of things I'm doing.
MJX Hyper Go 14210 v2 / H14BM Gets Major Speed Upgrades! (Desk Talk)
In this video Im showing how I have managed to cram a Hobbywing WP-8BL150 ESC, A Surpass rocket 3660 4300kv brushless motor and GPS into my MJX Hyper Go 14210 v2 H14BM.
its now 6s ready!
Please Subscribe for the upcoming GPS Speed Tests!
its now 6s ready!
Please Subscribe for the upcoming GPS Speed Tests!
Переглядів: 3 762
Відео
MJX Hyper Go 14210 v2 / H14BM Handling Characteristics When Stiff ,Low Plus 500k In Both Diffs
Переглядів 1,2 тис.6 місяців тому
this is just a small demo of how my car handles when setup stiff and low with 500k silicone oil in both diffs on a loose surface. I talk about the new Hobbywing WP-10BL60-RTR I got from www.seriousrc.co.uk and how it improves things. www.seriousrc.co.uk/products/hobbywing-quicrun-wp-10bl60-bl-esc?_pos=1&_sid=679d63eb8&_ss=r .
MJX Hyper Go 14210 v2 / H14BM, With Hobbywing 60 Amp ESC, GPS Speed Test (part 2)
Переглядів 3,8 тис.6 місяців тому
This is the second GPS speed test so far, this time my truggy has a hobbywing 60 Amp ESC in it. this test is to see if 15 more amps makes it go any faster?.. it has better throttle and braking responce, and its programmable so its certainly an upgrade. I got the Hobbywing WP-10BL60-RTR from www.seriousrc.co.uk www.seriousrc.co.uk/products/hobbywing-quicrun-wp-10bl60-bl-esc?_pos=1&_sid=5f61c9887...
MJX Hyper Go 14210 v2 / H14BM GPS Speed Test. (Part 1)
Переглядів 3,5 тис.6 місяців тому
I am testing the stock speed of my MJX Hyper Go 14210v2 / H14BM with the UK spec Venom 3s 2200mah 50c Lipo that comes with the UK versions of this car... normally this car should do about 48mph but mine is a little heavy due to all the alloy parts and the GPS installed under the body shell.. In my next vid it will have Hobbywing 60 amp ESC, and we will see if 15 more amps makes it faster..???
MJX Hyper Go 14210 v2, H14BM Upgraded To (New) Oldskool 2 Stick Radio
Переглядів 9817 місяців тому
This is my MJX Hyper Go 14210 v2 H14BM that I just converted to a 2 stick RC helicopter and plane transmitter.. the reasons why are in the video.. including Dual Rates on the steering and EXPO, dual throttle rates and sub trim to center the servo arm properly. Im 50 and my first RC cars had 2 stick radios, old habits are hard to drop haha. this makes it even more fun to play with now.. Thanks F...
100 Subs, Thank You!, And Channel Update
Переглядів 6277 місяців тому
This is just a quick thanks to the people that have subscribed to my channel over the years since 2008 and to the people that have just joined due to my my latest content.. and a quick channel update due to breaking my action camera. I Appreciate All Of You!,Cheers! If you would like to help me buy another cheap Apeman A80 action camera ,that would be Awesome! paypal.me/Cheggers1973
MJX Hyper Go 14210 v2, H14BM Loaded With Alloy Upgrades And Mods. Desk Talk
Переглядів 14 тис.7 місяців тому
This is my upgraded MJX Hyper GO 14210 v2 with all the aluminium parts fitted from www.seriousrc.co.uk I also fitted steering upgrades and a metal gear servo from Aliexpress. its lowered, with 500k silicone diff oil in both diffs, and has 15mm hub extensions. I talk about setup, handling and body mods etc. Thanks For Watching
MJX Hyper Go 14210-09 v2/H14BM Alloy Steering Upgrades & Metal Gear Servo. Desk Demo
Переглядів 6 тис.7 місяців тому
This is my MJX Hyper Go 14210 v2 with the extra telescopic front drive shafts like the H14BM. I have upgraded almost everything including the steering,servo and all Alloy Parts from www.seriousrc.co.uk I will do a detailed video about the Alloy Swing Arms and shock towers later, this small vid is just to show the new Alloy Steering Parts and The Metal Gear Servo.
MJX Hyper Go 14210 v2. Donuts With 500k diff Oil
Переглядів 9638 місяців тому
I have filled my diffs with 500k silicone diff oil for better traction and this is the effect it has on donuts.. you can see that the wheels that normally have no power to them are the ones spinning the car.. with open diffs it would not do this.
MJX Hyper Go`s @ A Ex Quarry, Hill Climbing & Racing
Переглядів 3,9 тис.8 місяців тому
MJX Hyper Go`s @ A Ex Quarry having fun climbing hills and racing with Wilf with his 14209 v2. my 14210 v2 has 15mm hub extenders and is lowered and stiffened with the stronger shocks that come with i,t and the diffs are filled with 500k weight silicone oil to give limited slip and more of a full 4WD setup. I like the difference it makes in helping it to track straight and slide when you blip t...
MJX Hyper Go's On A Track
Переглядів 6888 місяців тому
This is my MJX Hyper Go 14210 v2 and my mates 14209 v2 having a go around a small BMX pump track. we are trying hard not to hit the steel poles because we know they will break if we do haha, I hope you like my efforts to edit the footage together. cheers!
MJX Hyper Go 14210 v2 In The Snow!, How Did It GoGo?
Переглядів 3,7 тис.8 місяців тому
MJX Hyper Go 14210 v2/ H14BM because I have all 4 telescopic shafts so mechanically the same in full power mode. I could not resits a blast in the snow today ,and so I took it out for some fun and recorded some footage, I hope you like it, please consider Subscribing for more MJX Hyper Go stuff and other RC fun.. cheers!, Keith
MJX Hyper Go 14210 v2 & 14209 v2 Field Blast!
Переглядів 1,1 тис.8 місяців тому
fun at the field with my mate racing around goal posts. its much more fun with friends!
MJX Hyper GO 14210 v2, H14BM, Stiffened ,lowered And Widened With Ltd Slip Diffs On A BMX Pump Track
Переглядів 1,1 тис.9 місяців тому
MJX Hyper GO 14210 v2, H14BM, Stiffened ,lowered And Widened With Limited Slip Diffs. This is multiple shots around a BMX Pump Track to attempt at being entertaining, then some drifting and small jumps to demonstrate how well it slides and handles now after lowering the shocks, packing the diffs with lithmolly grease and fitting some 15mm wheel hub extenders that give 10mm per wheel...it was 22...
MJX Hyper GO 14210 v2 . H14BM, JUMP IT!, Like You paid For IT!.
Переглядів 1,2 тис.9 місяців тому
MJX Hyper GO 14210 v2 . H14BM, JUMP IT!, Like You paid For IT!. Most of the hyper Go Vids on UA-cam are by people that received their car for free because of the popularity and view count on their channel. I Paid for mine so it wont be getting launched mindlessly from a skate park ramp!.....not yet anyway haha..
MJX Hyper GO 14210 v2, H14BM Top Speed Runs On Grass Montage
Переглядів 3299 місяців тому
MJX Hyper GO 14210 v2, H14BM Top Speed Runs On Grass Montage
MJX Hyper GO 14210 v2, H14BM, Stiffened And lowered ,With limited Slip Diffs.
Переглядів 2,4 тис.9 місяців тому
MJX Hyper GO 14210 v2, H14BM, Stiffened And lowered ,With limited Slip Diffs.
XK Edge A430 With A XK X6 Programmable Transmitter
Переглядів 42310 місяців тому
XK Edge A430 With A XK X6 Programmable Transmitter
Brushless Top RC Hobby P51D Mustang 300g of thrust, Carbon Wrap,Carbon rods, Washout & Winglets!
Переглядів 24911 місяців тому
Brushless Top RC Hobby P51D Mustang 300g of thrust, Carbon Wrap,Carbon rods, Washout & Winglets!
Modified Top RC Hobby 450mm P51D Mustang Thrust test on 3s with a GemFan 5045 Prop
Переглядів 8011 місяців тому
Modified Top RC Hobby 450mm P51D Mustang Thrust test on 3s with a GemFan 5045 Prop
Top RC Hobby 450mm P51D Mustang, 3s Brushless Thrust Test with A GemFan 6030 Prop.
Переглядів 220Рік тому
Top RC Hobby 450mm P51D Mustang, 3s Brushless Thrust Test with A GemFan 6030 Prop.
Top RC Hobby P51D Mustang 3s Brushless Conversion First Flights, From 60 To 280g Of Thrust! (part 3)
Переглядів 596Рік тому
Top RC Hobby P51D Mustang 3s Brushless Conversion First Flights, From 60 To 280g Of Thrust! (part 3)
Top RC Hobby 450mm P51D Mustang 3s Brushless Thrust Test
Переглядів 212Рік тому
Top RC Hobby 450mm P51D Mustang 3s Brushless Thrust Test
Top RC Hobby P51D Mustang 450mm 2s Brushless, From 60 to 160g Of Thrust, Maiden Flights (Part 2)
Переглядів 802Рік тому
Top RC Hobby P51D Mustang 450mm 2s Brushless, From 60 to 160g Of Thrust, Maiden Flights (Part 2)
Top RC Hobby P51D Mustang 450mm 2s Brushless Conversion.. from 60 to 160 Grams Of Thrust! (Part 1)
Переглядів 750Рік тому
Top RC Hobby P51D Mustang 450mm 2s Brushless Conversion.. from 60 to 160 Grams Of Thrust! (Part 1)
Road Legal Electric Scooter...A quick ride around the block.
Переглядів 6612 роки тому
Road Legal Electric Scooter...A quick ride around the block.
Unique 60v 2600w Electric Scooter Having A Blast In The Woods
Переглядів 7003 роки тому
Unique 60v 2600w Electric Scooter Having A Blast In The Woods
Off Road On My Unique 2600w Electric Scooter
Переглядів 2693 роки тому
Off Road On My Unique 2600w Electric Scooter
Electric Scooter 2600w..Like A Train Down A Tunnel Of Trees
Переглядів 4464 роки тому
Electric Scooter 2600w..Like A Train Down A Tunnel Of Trees
Please me dude i have two options silicon oil 7000cst and 15000cst which should I use for the differentials ? Both front and back .the 15000is more affordable to me . Please help me bro
@@StudyConcentrate-y1z if you want limited slip, you will need thicker, I used 500,000cst.
@@cheggers1973 can i use silicon gresse or white lithium gresse actually silicon oil is not available in India and importing them will cost me 40$ . Please reply 🙏
@@StudyConcentrate-y1z you can use any grease, but it won't offer much resistance to limit the slip of the diff, it's not thick enough.... But it will lubricate it just fine.
@@cheggers1973 sorry for taking so much of your time but can you please explain me what is slip of differential
@StudyConcentrate-y1z Google what is a limited slip diff.. its explained in my videos too.
would the 16bl30 or the 10bl60 give more speef
@@feverexplosion1968 ua-cam.com/video/pxIIS0s-F-g/v-deo.htmlsi=cXhHTSUabt6V09oN Nope..
I got 46.6mph with everything stock . I was thinking of doing that exact same thing with the 60amp esc , but after watching your video i think i will keep it stock . Thanks for the video.
How come the diff holder not aluminum? The case that hold the motor pinion and differential?
Is mjx 14210 v2 and mjx h14bm has any difference? Plz answer my question...what should I buy
would like to clarify a little, was the front differential replaced with one similar to the rear one for the installation of reinforced drive shafts?
@LorD8-14 the differentials for the dog bone shafts and the telescopic ones are different yes.
Would the Hobbywing 16bl30 be fine?
@feverexplosion1968 yes but it's less power than standard.. standard is 45A.
After roughly 35 years with rc , I've just heard a solid explanation and tips of toe-in/out and handling. Cheers mate. Subbed.
@curbscrape8343 that's a nice comment to read chap!, Cheers!
Hello! Does the metal steering parts reducera slopiness in the wheels?
Great man how has the diffs been holding up?
Excellent...... 👌 But where's this promised speed run...???
@@BigAndy80sGen smashed it twice trying so far!, it's in the bag awaiting repair.
Dont put deans on 150 amp esc, put xt90 or ec5
0:18 What happened?
can you send the link for the Limited Slip Diff
Easy sub.
What wheel hex’s extender did you get ?
In addition to that, I also ordered an aluminum servo horn. Not sure if it will make a difference in the steering though.
Please come back and tell me if it did make any difference
Sorry for all the questions tonight what is the extenders to use? Do they fit just straight on
Hi sorry I’m trying to remove the middle bar on mine but it just seems to spin any tips
Got a e revo 1/16 which I think is annoying to work on. Do you think the mjx is hard to work on? Do you think the traxxas esc would fit?
Is there any difference in handling between the 2 models?
I'm looking into slowing my 14209 down to trail speeds as much as possible . Do you know of any combination of transmissions/gearing/esc/motors that would fit the 14209 that would make it more of a trail machine ? Thanks ! I've wanted to do this ever since I saw these videos - the 14209 is a beast on the trail ! ua-cam.com/video/H_jg3bj8sVU/v-deo.html ua-cam.com/video/gDbpdjTOeqc/v-deo.html
I only know how to make it faster chap.
U can limit the acceleration And make it slow
@@troopermyself1 I was hoping for something other than just trying to limit it with the amount of pressure on the trigger . From what others are telling me just replacing the receiver and transmitter with one that has a variable speed control on it might be the answer .
@@5675492 yes I bought a radiomaster mt12 elrs for that I too like crawlers whenever i go off-road…
Hi what’s best to get rid of throttle delay esc or new receiver?
Both.
@@cheggers1973 Damm 😂
Sorry what parts would you suggest for me to get to take the steering better without buying all the aluminium parts
They are approx £10, this is the Way...
@@cheggers1973ok was it just the aluminium steering just to buy to make it a bit better
The fans are weak and I'm trying to find a good motor fan. Replaced the servo with a 1/10 metal gear servo and it actually turns now.
Looking for 14209 hypergo servo upgrade Help needed
Hej, bra video, har du prövat de mindre hjulen till mjx 16210, mycket bättre stabiletet........... 😊
I can tell that it's Swedish, but that's all I know... You will need to translate that for a better reply from me mate...
@@cheggers1973 sorry, trythe wheels for the mjx 16210 for the sabitily........ 😜😜😜
@@larsjungnell1969 if that's advise, I think you didn't see this yet.. ua-cam.com/video/rEnMIsFoiXs/v-deo.htmlsi=xpkjD7Po97Kf4o3o
where can i buy the front lower bumper?
It was made by me from alloy tube.
How did you fit a 3660? I picked up a 3650 and its too fat to fit against both the driveshaft and properly mesh with the spur gear.😢
There is a minimum pinion size to make it work.. can't remember what it is though, I have a 28T fitted.
@cheggers1973 Thanks for that tidbit, I bought a 5mm shaft adapter and a few bigger teeth pinions. Hopefully this works out.
Hi! Just found your video. Great job there! I have one question. I am slowly upgrading my 14210 and I got the same red tie rods. Just went out to try the car but they get unscrewed completely. How did you fix them? I tried even to start with a very open toe (tie rods totally screwed in) but after 3 mins of runs they get completly unscrewed and they fall apart. Tried to put the system together, run once more and the issue came back.... Your help would be very much appreciated!!!
You need Loctite 243 Thread lock on all the screwy bits.. set the steering straight.
@@cheggers1973 thank you mate! Will put immediately when I will be home 🙏🙏🙏🙏🙏🙏🙏
If you go too far with aluminum especially suspension arms you'll lose all your durability.
Not correct. I've broke 3 plastic wishbones... zero aluminium ones.
You have any issue with stripped screw under the chasis? I noticed the screw material quite low quality
What to do for more speed
ua-cam.com/video/rEnMIsFoiXs/v-deo.htmlsi=qA52UwLkhbOvIjkw
Haha, enjoying your work. Has ordered the ESC and the upgrade metal geared servo and alloy servo saver found on serious rc uk for my 14209.
Is there any effect on speed ? Because of alloys
Bro from where did you grt that front metal rod plzz reply
Могу предложить что тут заменён передний диферинцал на подобный заднему. Что бы установить вперёд задние природные валы.
From where did you get thet metal plate that is under front shocker plz reply
I made it.
Use a paper clip
What about the balance plug rubbing the tire
Mine has a really bad delay in thr transmitter gonna be the second upgrade my first was a drag bar made from carbon fiber
Link to hub extensions please
www.ebay.co.uk/itm/195511861733?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=UdLxmPhjSYW&sssrc=4429486&ssuid=6T6KsFniTvK&var=&widget_ver=artemis&media=COPY
@@cheggers1973 thanks
what mm and do I need aftermarket axles
@@feverexplosion1968 it's your choice...mine are 15mm.
@@cheggers1973 wait so stock axles?
Bro is this car durable ? How is your experience with it till now with durablety
Bro how did you install that fromt bumper in it i too want to do it byt idk how to do it
I know I’m a bit late to seeing this but I noticed you have a metal skid plate just below the front suspension. Is that a part you found or is that a custom one? Great video!
Cheers!, It's a custom one made by myself from some alloy tube, mounted on top of a manufactured one from the 16207 that needs modifications to fit.
Bro is there any speed difference between 14210 and 14bm the older and newer version i have 14210 so is there any speed difference difference or is it same speed difference
I already answered this question.... Go to FaceBook, join MJX groups and ask questions there...
Bro can i use a 11.1v 5500mah 3s 35c lipo battery for my mjx idk anything abour it i just ordered it is it ok?
No, that's far too big..
@@cheggers1973 bro so can i use 2200 mah for mjx ? 14210
@@manvendersinghrathore8340 not all 2200msh 3s lipos are the same size.. but that's what the UK spec model comes with... Venom Drive 2200mah 3s 50c...
Is there any speed difference between between 14201 and the 14Bm the newer and the older plz reply i got the old one is there any difference and are boht tha car durable ?
If you mean the 14210 and the H14BM, they are the same speed same car apart from slightly different shell and the H14BM has a slow mode,eco mode.. the 14210 comes in full power mode..
@@cheggers1973 ok thanks for replying just one question more is it durable? Its much first rc the 14210 i will use it with car and I’ll do a very little bit bashing so is it durable enough for that?
@@manvendersinghrathore8340 it doesn't matter what I say in terms of durability, there is no measure.... Everything can break.
Great video. How durable has the aluminum parts been for you for bashing?
They are stronger due to being alloy.
What bearings are needed for inside the steering cups?
It states exactly what bearings are needed in the owners manual.
hey man, do you have any insider info on 10208? will there be an amazon commission model like h14bm?
I have no idea chap...
Nice run, if you want to see faster check out my run search for legendary Sonic beast thanks