Відео

Thanks so much! Thank you for watching! 👍🏻😃

Thank you so much for this brilliant comment!❤️ I'm so glad I could help you! Thanks for watching the video and your support! 😃

Hi Bruce, thanks so much for the feedback, I'm really glad this video was helpful to you!😃 Good luck tomorrow, and keep us updated if you end up buying the car, and remember to put "battery replacement" as the first thing on your TO DO list! And keep some spare cash to replace most of the fluids in the car, to bring it back to fresh condition, since it's an older car. Keep in touch! 👍🏻😊

Hi, since it's stopping it sounds like it's stopping properly but you're getting an error which I've not seen on my dashboard before so perhaps you might need to go and get it checked. Maybe the brakes are grabbing from one side only, not from both sides. Hope you manage to get it fixed! 👍🏻😊

I have not tried it, I'm not familiar with this engine oil!

Hi Michael, I did a bit more research about it. This Kingbolen model cannot calibrate the suspension for this specific car model that I have, so I would look into getting the GAP IID Tool instead. I made a video here about the GAP tool and what you can do with it - ua-cam.com/video/LoSgF2QNKSM/v-deo.html Thanks for watching the video and for your positive feedback! 👍🏻

@@lifeasusual Thanks for coming back. I've checked with Kingbolen and for the benefit of others. The Ediag does include air suspension calibration for certain LR cars. My L320 RRS is included so that takes in L320 2005-2013. I'd GUESS that LR3 2004-2014 is also therefore covered but check with Kingbolen via their website. They were quick to respond. After the first free year, annual licence renewal is $90. Given that the Ediag covers 150+ cars, and doesn't VIN lock like the IID, seems to me to be a great option.

That sounds great! Thanks for sharing the knowledge here. 👍🏻 If it works for your car, then you might want to have a look at their full version because this was the Kingbolen Mini model. The full version will give you access to more features.

@@lifeasusual Yeah it was the full Ediag version, not the mini.

Hi! 👋🏻 We used the GAP IID Tool to program the sound, and this is the video where I explain about the tool, and what you can do with it - I hope it helps! ua-cam.com/video/LoSgF2QNKSM/v-deo.html Thank you so much for your positive feedback, I'm extremely happy that you're finding them valuable! Have a great day! 😁

@@lifeasusual Thank you, I watched the video you recommended and it was very helpful. Thank you for taking the time to respond, I hope you continue helping us with your videos. greetings

That's really great, I'm very glad it helped! 👍🏻 Definitely I will be making more videos! More will be coming soon, and the videos are being prepared in the background - so stay tuned! 😃

If you have a look at our previous videos, we were working on different projects on the car, with oil leak. 👍🏻

Yeah, I totally agree with you! I noticed that I've not had any issues since I changed my oil brand, and the car is running absolutely fine. I've not noticed anything different, as long as it matches the same oil specification and I change my oil regularly. Thanks for watching the video and for the feedback! 👍🏻

Thanks for watching, I'm really glad you enjoyed it and found it valuable! 👍🏻

Hi! I've not had any issues like that, are you referring to the yellow flap from this video?

Hahaha 😅 Next time! 👍🏻

Yes, 100% that's on my to-buy list!

Thank you so much, I'm really glad you're enjoying the videos! 👍🏻

Next time! 👍🏻

Hi Billy, yes, it helped! It wasn't a big deal from the beginning, you'd have to focus to hear the sound, but after it was flushed properly (with the green fluid, we made a newer video here: ua-cam.com/video/skiOyfbEOtE/v-deo.html ) the sound was completely gone. 👍🏻

Siii!! 👍🏻😁

Thank you Edgar! Will do! 👍🏻Thank you for your support!

Hi, I've put the GAP IID link in the description of the video. 👍🏻 You can check it out as the prices keep changing. If that's too expensive, then you can buy a second-hand one online.

Hi Chris, this is why I don't believe in buying into the brand oil, rather it's finding the oil specification instead of paying a high price for the brand, and changing the oil very often (once every 6 months or 5,000 miles, whichever comes first).Hope you're well! 😊👍🏻

Thanks for watching, I'm glad you enjoyed the video! 😊👍🏻

Hi Vale, thank you so much for this! This was an older video of ours. We've paused the job on the injectors but we'll have to revisit it again if we have any issues in that area. 👍🏻

Hi! No, you have to buy the GAP IID Tool (the expensive one) in order to be able to do that 👍🏻

Hi Nyk, I've never had any issues removing black and then red immediately. But I'm not a professional so not everything I do is correct! 😅

Thank you so much for the compliment, I'm glad you found our videos helpful! Good luck with your project, and let me know if you have any questions at all, and I'll do my best to answer to the best of my abilities 😊👍🏻

Thank you very much, I'm glad you enjoyed the video and found it valuable! 👍🏻

I'm not too sure if I'm honest with you, as I haven't worked on a Range Rover Sport but they are more or less the same. 👍🏻

All of the engines are reliable, it depends how you treat them, service them and look after them.

That's exactly what I am using - all of my parts I used, I bought from Design 911 and I'm very unhappy about it because I was told they're either genuine or OEM which, in other words, it's the same supplier as the genuine parts.

I made a video on how to use the GAP tool which explains this in more detail: ua-cam.com/video/LoSgF2QNKSM/v-deo.html 👍🏻 Hope this helps! 😊

Feel free to ask me, and if it's something I can help you with, I definitely will! But I'm no expert in any way, shape or form 😊

Hi Sam, here's the video on how I did it: ua-cam.com/video/J9nGcGbJi2A/v-deo.html

I found that using cheap, cheap laundry detergent on the oil for a few days, then jet-washing it has been the best method so far. I haven't found any alternative products but I can assure you, in my experience, that Gunk definitely did not work. Just to clarify, in this video I have not jet-washed it, yes I used the jet-wash but I was only using it as a water hose (as recommended on the instructions) because I wanted to see the actual chemical working, not the pressure washer. Hope this helps! 👍🏻

No, they are the genuine Land Rover brake calipers, but my engine is the 3.6 TDV8 Autobiography, not the 4.4. With regards to the coolant, if you have it at the correct level, it should automatically reach that point where you can see it, and it should be properly sealed. Hope this helps! Thanks for watching 👍🏻

You're absolutely right, I do need a mic and I do HAVE a mic and I should've used it in that test drive, but I was so excited and stressed for that drive that I completely forgot about everything!!! I am a total unprofessional youtuber !! I need to do better! 😅 Every time I make a video, I forget about the camera and I focus on the car and excitement of working on the car, and I ignore all the aspects of camerawork and mic work. Which I shouldn't! Thanks for your support as always! 😊👍🏻

Thank you! It really is! 😁 Thanks for watching! 👍🏻

Hi, thanks for watching! 😊👍🏻I haven't had this issue and haven't encountered any issues with cables under the seats. I just had an issue with the sensor not being attached to the glass properly, which was because of the company who fitted a new windshield. Hope this helps!

Thank you for watching! I'm glad you enjoyed it! 😊👍🏻

Hi, if you go to the website for parts which I mentioned in the video, you'll be able to go and find the generations of engines. 👍🏻😊

Mine is 2009/2010 👍🏻

That's the dream, isn't it?! 😂

Hi Colin, thanks so much for the feedback, I'm glad you enjoyed it and found it helpful! Let me know how the job goes when you get it started! 👍🏻 You can do it!! 😊

Thank you! And thank you for watching! 😊👍🏻

Thank you so much, Frank!👍🏻 Really glad you enjoyed the video! We didn't know either; this was completely new to us as well! Very interesting design for sure 👌🏻 And as you know, I'm not a mechanic so this is all new to me 😁 Hope you're doing well!

It's only surface rust; I'm sure I can sort it out. I'm really looking forward to completing the project and see the end results! Thank you very much for watching🙂👍🏻