Відео

Hi Theo, DJs made it work in 1995… the DJM500 is a quality mixer but might have suffered over the years. It’s also slightly noisier than my other Pioneer DJM mixers (some hiss from speakers). I think your Reloop would be slightly better because it has fx parameter time and level (2 knobs), the DJM500 only has time. The 1998 DJM600 has the added parameter level. Other than that, same type of unit.

@@edgarsteenwinkel1970 thank you very much for the detailed response. I will stick to my reloop for the time being.

Thank you! Mystery solved.

I ordered through encompass.com. Yes unfortunately they were that expensive. I tried to find used speakers as donors but usually the tweeters are broken already. There are many versions of the tweeter: make sure to get the right one. Good luck!

To be honest, very little. I have the CM1 center speaker too, and its dome was dented: when I popped out the dent there was a noticeable change from “too bright”, or “harsh” to “smooth”. With the CM1 S2 dome fix the difference was much smaller. I don’t think I would have noticed if I hadn’t known about the fix. It sounded the same when I replaced the tweeter. I keep the “triple dome” as backup, just in case.

Sorry, I don’t know why there are 3 rings. There are only two wires coming out of the round circuit board, red and green. You can see this in the video at 4:55.

Not sure about the question. There is no material behind the grill. The grill is powder coated pressed steel. The rest is ABS plastic. The speaker is screwed directly onto the plastic shell. Hope this helps.

@@edgarsteenwinkel1970 is what you can see in the grill holes? I thought it was material

@@edgarsteenwinkel1970 i hope that help? As you can not see through the holes, there is something behind then

Wow yes there is a thin black foam layer stuck on the inside of the grill. Never noticed. Thanks for pointing that out! It’s something like this: WAYBER Speaker Grill Cloth Stereo Mesh Fabric for Speaker Repair, Black - 55 x 20 in / 140 x 50 cm a.co/d/8lUeux1

@@edgarsteenwinkel1970 Any idea how to replace it? Is it glued?

it's the first gen wirelsss capsule from the 90s -00s.

I’m sure mr John Bowers would not approve, but it worked as a temporary fix. To be honest, when I replaced it with the $125 OEM replacement, it sounded pretty similar.

I used a small aluminium foil patch while waiting for the replacement tweeter. The proper tweeter does sound better, but you can listen to the patched up tweeter as it's just like using a cheapo aluminium tweeter

A membrane and a magnet.

It could also be the rubber ring that came loose around the front of the speaker. Also an easy fix with speaker glue. Good luck!

@@edgarsteenwinkel1970 thanks mate

Wow good luck! Let us know if it works and send a picture!

It will be fine. Just make sure the foam pieces did not move around and are not stuck inside the cartridge, on top of the membrane. That will muffle the sound. I’ve had that happen. Once all the disintegrated foam is removed, the mic will sound fine. Good luck!

Yep, triple dome, really :)

It's a new anti distortion tweeter :) more sturdy than the "old CM1 tweeters" This is such an upgrade 😂

ULX2.

Your microphone transmitter should have a label somewhere (under battery cover?) with its frequency or frequency code. Then find a used Shure receiver with that same frequency.

Obviously try at your own risk, but they just pop off. Use something like a credit card (or even softer plastic) and carefully pry them off, after removing the grille with the magnet tool. The dome will damage easily, if it is touched. The larger rings around the driver same thing: there are 4 small plastic posts that snap into place behind the ring. Be careful and good luck… and consider posting the result here!

@@edgarsteenwinkel1970 Thank you for your fast answer, i will try it on this way! Greets.

@@edgarsteenwinkel1970 Thanks! It helped me to disassemble mine.

He does state that he has a new tweeter on order and that this is a temporary repair! Good link though!

I used speaker repair glue. www.simplyspeakers.com/speaker-repair-adhesive-mi-3035.html

it's the discontinued model used from the 90s to the early 00s.

Bonne chance!

i know Im kind of off topic but do anybody know of a good site to watch newly released series online?

@Jabari Callan lately I have been using Flixzone. Just search on google for it =)

@Pedro Emmett Definitely, I've been watching on flixzone for years myself :)

@Pedro Emmett Thank you, I signed up and it seems like a nice service :D I really appreciate it !!

It’s an ultra-thin wire, stuck to the yellow tape. Thinner than a human hair. I was able to pry it loose with tweezers and bridge a burnt spot with a piece of thin copper wire that I soldered over the gap. I used a magnifying glass for the soldering. It probably changed the impedance of the microphone but it is working again. Hope this helps.