Відео

Awesomeness! 😁

🙂 Which part of the video, or are you talking about the device ? I have about 5 of these sensors all over the house & they're working like a charm!

​@@LazyManJoe They suck... they dont last for long and not accurate either... thats why they are cheap

@@XSpt1 Thanks for the heads-up. So far they've been working well for me, but I will certainly keep an eye out for any issues.

Hi @rawtravisawr, apologies on that - I did go through that part too quickly in the video & did not explain in detail. I used the same dimensions for the inside letters as what I originally started with, but I extruded (inward) a 1mm "wall" to make a lip which would then fit onto the base and to give the cap a bit of rigidity. Because the caps are printed with only a 1mm wall, there is a bit of flex to push them into the base. I have an old Ender 3 Pro printer and its tolerances can sometimes be a bit "off" 🙂 - so my L & M letters fit quite snug, but the J was a bit loose. Hope this helps!

You’re welcome! Glad it was useful.

Hi @rodley1806, I used PLA + white filament (nothing special), but the design for the cap ends up as a hollow letter with a wall thickness of between 1mm & 2mm (mine worked out to 1mm). This helps to not be too thick for light to go through, but still sturdy enough to slide into the base. Cheers!

@@LazyManJoe thanks for the reply

Thanks - it was amazing & I am going to be doing it again soon 🙂 [some lessons learnt and need to practice a bit more!]

@NicholasLampitt - I leave the meat to marinade in the fridge for 18-24 hours, turning it regularly to make sure all the liquid covers all the pieces of meat. Then I hang it in the biltong maker.

@@michaelprinc it is really easy,quick & very tasty 😋 You can mix & match all kinds of ingredients for the filling! (I just used that I had in the fridge 😅)

@@olivierdalenoord3764 thanks a lot!

😅 Thanks for watching! When the opportunity presents itself, wear the apron 😂

Dough can sometimes be tricky due to a lot of factors, things don't always turn out for me either - but practice helps. Most of the time for me it was related to the yeast and room temperature (too cold), and me getting impatient. Just hang in there and don't give up! It is SO satisfying when you get it right and taste your amazing handywork!

Sorry @marasilva1011 I don't understand Portuguese (I think)

That's a great idea! I'll try it next time!

Thanks man! I hope it turns out as good for you as it did for me!

Thanks for the comment! I'm still learning a lot on my "Baking adventures", but having a lot of fun! Bake the bread for 20-25 minutes at 230C (450F) - the bread should sound hollow when you tap on it, or you can check the inside temperature to be 87C - 90C (190F)

Thanks homie!

The smell of the fresh bread "forced" us to taste !

Glad you enjoyed it!

@@MaximeSchiltz - I’m learning & will have to do some research it seems 😅 Thanks for commenting!

I made too little glaze (ran out of ingredients & had to use what we had). It still turned out AMAZING!

Thanks for sharing this info!

Thank you very much! I enjoy making them & appreciate the feedback!

@@MokayaTTY it was amazing! I realised I should add a tsp of salt ( maybe just 0.5 tsp) but that’s for next time 😃

Hi @shameemm467 - if the installer asks for macOS 11 it means you need to download an earlier version of Davinci. I had to work my way back through the list of installers to find one which worked. On my Mac the eventual version that worked was Davinci 16.2.8, but it depends on your Mac and OS - so you will have to use trial & error to find a working combination. Also remember that you won't be able to upgrade from that version once you have a working version and you will need to stick with it, as the next version may require an upgraded OS. This is a very tedious process to find a working combination. The other option is to try Davinci Resolve 16 as a base to know whether version 16 onwards will work on your machine (and then install each update until it doesn't work anymore) - if this doesn't work, then try Davinci Resolve 15.3.1 (which was the last 15 release) as this release states macOS 10.12.6 Sierra as a minimum.

Great! Happy this helped!

Hi Jona - the only thing I can think of for this is that the version you’re trying to install will only work on later versions of MacOS (I assume when you say system 11.0 onwards you mean the next version of MacOS after High Sierra). If the version of DaVinci you tried doesn’t work, you need to try an earlier version (& if that doesn’t work, even an earlier version) The process can be very tedious and once you find a working version, you will have to stick to that going forward as you won’t be able to upgrade DaVinci as the upgrade will require an upgraded version of MacOS as well 😅

@@LazyManJoe thank you, I´ll try

Hi there, this normally happens when the version you downloaded (Da Vinci Resolve 16.x.x) is maybe 1 version later than supported on your Mac (10.13). I had to go back to previous versions of Da Vinci until I found a working version. It is a pain, but the only way I could find the latest supported version on my Mac at that point.

You need to check the download and download the free version (NOT Studio) - the Studio version is paid for, but there is a free version.

Yes constantly

Hi - I don't think you can downgrade as I only see the new firmware available for download AND the upgrade process only looks for versions of the firmware higher than currently installed. I doubt the image quality would degrade from a firmware update as they typically only add additional features & bug fixes. I did not see a degradation (or improvement either) from upgrading, but I do like to ensure the latest firmware runs on my devices where I can.

@@LazyManJoe thanks

@Shisui477 You can update, there is no problem

I came here to say this! Thanks for showing that step!

Great! Happy this helped!

Great! Happy this helped!

Hi - a couple of people did mention that the monitor only recognised some USB sticks formatted FAT32 and not bigger than 16GB. Maybe try another USB stick ?

Hi, make sure not to download the Studio version but rather the normal one - it does not require a license key. The Studio version is the paid version & thus needs a key.

Hi, are you sure you're selecting the correct download and that you then complete the form with your detail ? I just checked and it works fine for me - www.blackmagicdesign.com/support/ Mac download - www.blackmagicdesign.com/support/download/0221c32a73844413bc0b1ec35686a4d3/Mac%20OS%20X Windows - www.blackmagicdesign.com/support/download/0221c32a73844413bc0b1ec35686a4d3/Windows

this should be pinned.. or i mean hearted

Great! Happy this helped!