Відео

Panel under bed to access pump

Mine makes a clattering noise when I open the fridge door but will stop if I press the door switch , can’t seem to get it to cool down under 40 degrees, I have already replaced the fan motor and defrost control board, I think the damper linkage may have a loose connection at linkage

Did you ever track down a part? I looked on the website, 3 dollar part with $37 shipping fee. Hoping to find a work around....great vid

Repairman wants to charge $500 for 30 minutes of work to replace this part. I'm totally doing this myself.

I ordered a new charging port for mine and mine is still not working it will only run for about 3 seconds and then cut off

Yeah I'm having the exact same problem

Note to self: If your damper motor is malfunctioning and has the door stuck CLOSED but all else is good with your refrigerator, a simple way to keep the food in the fridge compartment from spoiling or going bad much sooner is to just loosen the three screws that hold the damper and it's styrofoam securely in place. That way, it lets air from the freezer compartment through to the fridge compartment through unusual means but it's a good hack that works. Another key takeaway is if when you replace your damper motor, and it comes in two styrofoam halves, if they're not glued together, then just tape them together for easier placement behind the casing.

No anode would mean the tank on the water heater is aluminum. Steel tanks require an anode rod to prevent the tank from rusting.

My fridge looks exactly like yours. Mine was freezing the food in the fridge side. Following your guidance I was able to take the control panel out. Found that the damper had become detached from the control lever. I was able to reattach it and the fridge is cool, not freezing. Thank you for the help.

I just did this replacement, thanks for the video btw, but the damper stays wide open no matter the setting. Ever experience this, bad motor?

Yeah, I'm about to ram plastic spoons up my old style Kenmores... Too much playing, I'll prop it open, lol. It has the actual knobs.

Ice formed on the lever after power outage. I guess condensation formed and when the power returned after 2 days it froze in place, jamming the door shut

Awsome video and very detailed. Thank you. Can you do a de winterizing video please. I have the tracer 260 bhse

I slipped a jumper wire between the W&B. Stopped blinking. Hit the petal, blinks 7Xs now. Not sure what’s up now but thanks for the video to bypass the charging port. I might’ve brown the controller lol.

Mines won’t go forward but it goes backwards what do I do ?

I'm about to do the same on mine but trying to figure out what the white wire is for and if it's connected to the black permanently what the repercussions could be?

🌈 𝐩𝐫𝐨𝐦𝐨𝐬𝐦

Thank you so much!!

I recently discovered your channel and all i can say is that this is just perfect ◑﹏◐